• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni da taglio / testa cilindrica / perno di forzamento / blocco antirotazione / WPC, HW (Codici componente - Download CAD)

Punzoni da taglio / testa cilindrica / perno di forzamento / blocco antirotazione / WPC, HW

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • FLANGE
  • SKH51
  • SKD11
  • POWDER HSS
  • HW
  • WPC

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. << Indietro
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Avanti >>
Codice componente
GHW-PJAL10-LCT[50.1-59.9/0.1]-PC[2.8-2.99/0.01]
GHW-PJAL10-LCT[60.1-69.9/0.1]-P[3-7.8/0.01]
GHW-PJAL10-LCT[60.1-69.9/0.1]-PC[2.8-2.99/0.01]
GHW-PJAL10-LCT[70.1-79.9/0.1]-P[3-7.8/0.01]
GHW-PJAL10-LCT[70.1-79.9/0.1]-PC[2.8-2.99/0.01]
GHW-PJAL10-LCT[80.1-89.9/0.1]-P[3-7.8/0.01]
GHW-PJAL10-LCT[80.1-89.9/0.1]-PC[2.8-2.99/0.01]
GHW-PJAL10-LCT[90.1-99.9/0.1]-P[3-7.8/0.01]
GHW-PJAL10-LCT[90.1-99.9/0.1]-PC[2.8-2.99/0.01]
GHW-PJAL10-LMT[33-49.9/0.1]-P[3-7.8/0.01]
GHW-PJAL10-LMT[33-49.9/0.1]-PC[2.8-2.99/0.01]
GHW-PJAL10-LMT[50.1-59.9/0.1]-P[3-7.8/0.01]
GHW-PJAL10-LMT[50.1-59.9/0.1]-PC[2.8-2.99/0.01]
GHW-PJAL10-LMT[60.1-69.9/0.1]-P[3-7.8/0.01]
GHW-PJAL10-LMT[60.1-69.9/0.1]-PC[2.8-2.99/0.01]
GHW-PJAL10-LMT[70.1-79.9/0.1]-P[3-7.8/0.01]
GHW-PJAL10-LMT[70.1-79.9/0.1]-PC[2.8-2.99/0.01]
GHW-PJAL10-LMT[80.1-89.9/0.1]-P[3-7.8/0.01]
GHW-PJAL10-LMT[80.1-89.9/0.1]-PC[2.8-2.99/0.01]
GHW-PJAL10-LMT[90.1-99.9/0.1]-P[3-7.8/0.01]
GHW-PJAL10-LMT[90.1-99.9/0.1]-PC[2.8-2.99/0.01]
GHW-PJAL13-[50-100/10]-P[6-10.8/0.01]
GHW-PJAL13-[50-100/10]-PC[5-5.99/0.01]
GHW-PJAL13-LC[33-49.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LC[33-49.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LC[50.1-59.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LC[50.1-59.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LC[60.1-69.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LC[60.1-69.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LC[70.1-79.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LC[70.1-79.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LC[80.1-89.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LC[80.1-89.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LC[90.1-99.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LC[90.1-99.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LCT[33-49.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LCT[33-49.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LCT[50.1-59.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LCT[50.1-59.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LCT[60.1-69.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LCT[60.1-69.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LCT[70.1-79.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LCT[70.1-79.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LCT[80.1-89.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LCT[80.1-89.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LCT[90.1-99.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LCT[90.1-99.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LMT[33-49.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LMT[33-49.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LMT[50.1-59.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LMT[50.1-59.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LMT[60.1-69.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LMT[60.1-69.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LMT[70.1-79.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LMT[70.1-79.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LMT[80.1-89.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LMT[80.1-89.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL13-LMT[90.1-99.9/0.1]-P[6-10.8/0.01]
GHW-PJAL13-LMT[90.1-99.9/0.1]-PC[5-5.99/0.01]
GHW-PJAL16-[60-100/10]-P[10-13.8/0.01]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSJector Tip shape Material Surface treatment B (Tip length) D (Shank diameter)
(mm) 		P (Tip dimension)
(mm) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		LCT (Head thickness tolerance change + Total length alteration)
(mm) 		LMT (Head thickness tolerance change + Total length alteration)
(mm) 		PC (Tip dimension alteration)
(mm) 		R (Tip corner R)
(mm) 		W (Tip dimension)
(mm) 		WC (Tip dimension alteration)
(mm)
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL10---50.1 ～ 59.9-2.8 ～ 2.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL103 ～ 7.8--60.1 ～ 69.9-----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL10---60.1 ～ 69.9-2.8 ～ 2.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL103 ～ 7.8--70.1 ～ 79.9-----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL10---70.1 ～ 79.9-2.8 ～ 2.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL103 ～ 7.8--80.1 ～ 89.9-----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL10---80.1 ～ 89.9-2.8 ～ 2.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL103 ～ 7.8--90.1 ～ 99.9-----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL10---90.1 ～ 99.9-2.8 ～ 2.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL103 ～ 7.8---33 ～ 49.9----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL10----33 ～ 49.92.8 ～ 2.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL103 ～ 7.8---50.1 ～ 59.9----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL10----50.1 ～ 59.92.8 ～ 2.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL103 ～ 7.8---60.1 ～ 69.9----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL10----60.1 ～ 69.92.8 ～ 2.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL103 ～ 7.8---70.1 ～ 79.9----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL10----70.1 ～ 79.92.8 ～ 2.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL103 ～ 7.8---80.1 ～ 89.9----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL10----80.1 ～ 89.92.8 ～ 2.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL103 ～ 7.8---90.1 ～ 99.9----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL10----90.1 ～ 99.92.8 ～ 2.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.850 ～ 100-------
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13-50 ～ 100---5 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8-33 ～ 49.9------
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13--33 ～ 49.9--5 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8-50.1 ～ 59.9------
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13--50.1 ～ 59.9--5 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8-60.1 ～ 69.9------
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13--60.1 ～ 69.9--5 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8-70.1 ～ 79.9------
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13--70.1 ～ 79.9--5 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8-80.1 ～ 89.9------
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13--80.1 ～ 89.9--5 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8-90.1 ～ 99.9------
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13--90.1 ～ 99.9--5 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8--33 ～ 49.9-----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13---33 ～ 49.9-5 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8--50.1 ～ 59.9-----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13---50.1 ～ 59.9-5 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8--60.1 ～ 69.9-----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13---60.1 ～ 69.9-5 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8--70.1 ～ 79.9-----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13---70.1 ～ 79.9-5 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8--80.1 ～ 89.9-----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13---80.1 ～ 89.9-5 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8--90.1 ～ 99.9-----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13---90.1 ～ 99.9-5 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8---33 ～ 49.9----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13----33 ～ 49.95 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8---50.1 ～ 59.9----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13----50.1 ～ 59.95 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8---60.1 ～ 69.9----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13----60.1 ～ 69.95 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8---70.1 ～ 79.9----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13----70.1 ～ 79.95 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8---80.1 ～ 89.9----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13----80.1 ～ 89.95 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL136 ～ 10.8---90.1 ～ 99.9----
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL13----90.1 ～ 99.95 ～ 5.99---
1 Preventivo 10Standard typeAPowdered high-speed steelHW coatingL1610 ～ 13.860 ～ 100-------

Loading...

  1. << Indietro
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Avanti >>
 

Informazioni di base

Heavy-load punches No Shank type Single-stepped Shank (mounting part) shape Key flat
Shank diameter D tolerance +0.005/0 T (Head thickness/plate thickness)(mm) 5

Configura

Ripristina

18,102Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Jector

    • Standard type
    • Spring reinforced type

    Ripristina

  • Tip shape

    • A
    • D
    • R
    • E
    • G

    Ripristina

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel

    Ripristina

  • Surface treatment

    • HW coating
    • WPC

    Ripristina

  • B (Tip length)

    • L
    • S
    • X

    Ripristina

  • D (Shank diameter)(mm)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 13
    • 16
    • 20
    • 25

    Ripristina

  • P (Tip dimension)(mm)

     [1-24.97/0.01mmpezzi]

    Ripristina

  • L (L dimension)(mm)

     [40-100/10mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

     [27-100/0.1mmpezzi]

    Ripristina

  • LCT (Head thickness tolerance change + Total length alteration)(mm)

     [27-100/0.1mmpezzi]

    Ripristina

  • LMT (Head thickness tolerance change + Total length alteration)(mm)

     [27-100/0.1mmpezzi]

    Ripristina

  • PC (Tip dimension alteration)(mm)

     [0.9-0.99/0.01mmpezzi][1.8-1.99/0.01mmpezzi][2.5-3/0.01mmpezzi][5-5.99/0.01mmpezzi][8-17.99/0.01mmpezzi]

    Ripristina

  • R (Tip corner R)(mm)

     [0.15-11.39/0.01mmpezzi]

    Ripristina

  • W (Tip dimension)(mm)

     [1-22.8/0.01mmpezzi]

    Ripristina

  • WC (Tip dimension alteration)(mm)

     [1.8-1.99/0.01mmpezzi][2.5-2.99/0.01mmpezzi][5-6.99/0.01mmpezzi]

    Ripristina

  • Tipo

    • GHW-PJAL
    • GHW-PJAS
    • GHW-PJDL
    • GHW-PJDS
    • GHW-PJEL
    • GHW-PJES
    • GHW-PJGL
    • GHW-PJGS
    • GHW-PJRL
    • GHW-PJRS
    • GHW-PJVAL
    • GHW-PJVAS
    • GHW-PJVDL
    • GHW-PJVDS
    • GHW-PJVEL
    • GHW-PJVES
    • GHW-PJVGL
    • GHW-PJVGS
    • GHW-PJVRL
    • GHW-PJVRS
    • GW-PJAL
    • GW-PJAS
    • GW-PJDL
    • GW-PJDS
    • GW-PJEL
    • GW-PJES
    • GW-PJGL
    • GW-PJGS
    • GW-PJRL
    • GW-PJRS
    • GW-PJVAL
    • GW-PJVAS
    • GW-PJVDL
    • GW-PJVDS
    • GW-PJVEL
    • GW-PJVES
    • GW-PJVGL
    • GW-PJVGS
    • GW-PJVRL
    • GW-PJVRS
    • GW-SJAL
    • GW-SJAS
    • GW-SJAX
    • GW-SJDL
    • GW-SJDS
    • GW-SJDX
    • GW-SJEL
    • GW-SJES
    • GW-SJEX
    • GW-SJGL
    • GW-SJGS
    • GW-SJGX
    • GW-SJRL
    • GW-SJRS
    • GW-SJRX
    • GW-SJVAL
    • GW-SJVAS
    • GW-SJVAX
    • GW-SJVDL
    • GW-SJVDS
    • GW-SJVDX
    • GW-SJVEL
    • GW-SJVES
    • GW-SJVEX
    • GW-SJVGL
    • GW-SJVGS
    • GW-SJVGX
    • GW-SJVRL
    • GW-SJVRS
    • GW-SJVRX

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.