• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni da taglio in forme speciali / perno di forzatura

Punzoni da taglio in forme speciali / perno di forzatura

MISUMI

MISUMI

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. Avanti >>
Codice componente
PJ2L5-[40-80/10]-A[1-90/0.1]-Q0-R0-S[0.2-50/0.01]
PJ2L5-[40-80/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L5-[40-80/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R0-S[0.2-50/0.01]
PJ2L5-[40-80/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L5-LC[37-79.9/0.1]-A[1-90/0.1]-Q0-R0-S[0.2-50/0.01]
PJ2L5-LC[37-79.9/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L5-LC[37-79.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R0-S[0.2-50/0.01]
PJ2L5-LC[37-79.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L6-[40-80/10]-A[1-90/0.1]-Q[0-9999/9999]-R0-S[0.2-50/0.01]
PJ2L6-[40-80/10]-A[1-90/0.1]-Q[0-9999/9999]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L6-[40-80/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R0-S[0.2-50/0.01]
PJ2L6-[40-80/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L6-LC[37-79.9/0.1]-A[1-90/0.1]-Q[0-9999/9999]-R0-S[0.2-50/0.01]
PJ2L6-LC[37-79.9/0.1]-A[1-90/0.1]-Q[0-9999/9999]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L6-LC[37-79.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R0-S[0.2-50/0.01]
PJ2L6-LC[37-79.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L8-[40-100/10]-A[1-90/0.1]-Q0-R0-S[0.2-50/0.01]
PJ2L8-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L8-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R0-S[0.2-50/0.01]
PJ2L8-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L8-LC[37-99.9/0.1]-A[1-90/0.1]-Q0-R0-S[0.2-50/0.01]
PJ2L8-LC[37-99.9/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L8-LC[37-99.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R0-S[0.2-50/0.01]
PJ2L8-LC[37-99.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L10-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L10-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L10-[40-100/10]-A[1-90/0.1]-R0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L10-LC[37-99.9/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L10-LC[37-99.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L10-LC[37-99.9/0.1]-A[1-90/0.1]-R0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L13-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L13-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L13-LC[37-99.9/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L13-LC[37-99.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L16-[40-100/10]-A[1-90/0.1]-Q0-R0-S[0.2-50/0.01]
PJ2L16-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L16-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R0-S[0.2-50/0.01]
PJ2L16-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L16-LC[37-99.9/0.1]-A[1-90/0.1]-Q0-R0-S[0.2-50/0.01]
PJ2L16-LC[37-99.9/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L16-LC[37-99.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R0-S[0.2-50/0.01]
PJ2L16-LC[37-99.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L20-[40-100/10]-A[1-90/0.1]-Q0-R0-S[0.2-50/0.01]
PJ2L20-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L20-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R0-S[0.2-50/0.01]
PJ2L20-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L20-LC[37-99.9/0.1]-A[1-90/0.1]-Q0-R0-S[0.2-50/0.01]
PJ2L20-LC[37-99.9/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L20-LC[37-99.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R0-S[0.2-50/0.01]
PJ2L20-LC[37-99.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L25-[40-100/10]-A[1-90/0.1]-Q0-R0-S[0.2-50/0.01]
PJ2L25-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L25-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R0-S[0.2-50/0.01]
PJ2L25-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L25-LC[37-99.9/0.1]-A[1-90/0.1]-Q0-R0-S[0.2-50/0.01]
PJ2L25-LC[37-99.9/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PJ2L25-LC[37-99.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R0-S[0.2-50/0.01]
PJ2L25-LC[37-99.9/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
SJ2L5-[40-80/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
SJ2L5-[40-80/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape Material Punch shank (mounting part) shape D (Outer diameter)
(mm) 		A
(mm) 		B
(mm) 		C
(mm) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		P
(mm) 		Q
(mm) 		R
(mm) 		S
(mm) 		W
(mm)
1 Preventivo 102LPowdered high-speed steelStandard51 ～ 90--40 ～ 80--000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard51 ～ 90--40 ～ 80--00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard51 ～ 90--40 ～ 80--0.2 ～ 5000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard51 ～ 90--40 ～ 80--0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard51 ～ 90---37 ～ 79.9-000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard51 ～ 90---37 ～ 79.9-00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard51 ～ 90---37 ～ 79.9-0.2 ～ 5000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard51 ～ 90---37 ～ 79.9-0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard61 ～ 90--40 ～ 80--0 ～ 999900.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard61 ～ 90--40 ～ 80--0 ～ 99990.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard61 ～ 90--40 ～ 80--0.2 ～ 5000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard61 ～ 90--40 ～ 80--0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard61 ～ 90---37 ～ 79.9-0 ～ 999900.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard61 ～ 90---37 ～ 79.9-0 ～ 99990.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard61 ～ 90---37 ～ 79.9-0.2 ～ 5000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard61 ～ 90---37 ～ 79.9-0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard81 ～ 90--40 ～ 100--000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard81 ～ 90--40 ～ 100--00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard81 ～ 90--40 ～ 100--0.2 ～ 5000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard81 ～ 90--40 ～ 100--0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard81 ～ 90---37 ～ 99.9-000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard81 ～ 90---37 ～ 99.9-00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard81 ～ 90---37 ～ 99.9-0.2 ～ 5000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard81 ～ 90---37 ～ 99.9-0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard101 ～ 90--40 ～ 100--00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard101 ～ 90--40 ～ 100--0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard101 ～ 90--40 ～ 100---0.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard101 ～ 90---37 ～ 99.9-00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard101 ～ 90---37 ～ 99.9-0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard101 ～ 90---37 ～ 99.9--0.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard131 ～ 90--40 ～ 100--00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard131 ～ 90--40 ～ 100--0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard131 ～ 90---37 ～ 99.9-00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard131 ～ 90---37 ～ 99.9-0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard161 ～ 90--40 ～ 100--000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard161 ～ 90--40 ～ 100--00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard161 ～ 90--40 ～ 100--0.2 ～ 5000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard161 ～ 90--40 ～ 100--0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard161 ～ 90---37 ～ 99.9-000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard161 ～ 90---37 ～ 99.9-00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard161 ～ 90---37 ～ 99.9-0.2 ～ 5000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard161 ～ 90---37 ～ 99.9-0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard201 ～ 90--40 ～ 100--000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard201 ～ 90--40 ～ 100--00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard201 ～ 90--40 ～ 100--0.2 ～ 5000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard201 ～ 90--40 ～ 100--0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard201 ～ 90---37 ～ 99.9-000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard201 ～ 90---37 ～ 99.9-00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard201 ～ 90---37 ～ 99.9-0.2 ～ 5000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard201 ～ 90---37 ～ 99.9-0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard251 ～ 90--40 ～ 100--000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard251 ～ 90--40 ～ 100--00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard251 ～ 90--40 ～ 100--0.2 ～ 5000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard251 ～ 90--40 ～ 100--0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard251 ～ 90---37 ～ 99.9-000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard251 ～ 90---37 ～ 99.9-00.2 ～ 480.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard251 ～ 90---37 ～ 99.9-0.2 ～ 5000.2 ～ 50-
1 Preventivo 102LPowdered high-speed steelStandard251 ～ 90---37 ～ 99.9-0.2 ～ 500.2 ～ 480.2 ～ 50-
1 Preventivo 102LSKH51 EquivalentStandard51 ～ 90--40 ～ 80--00.2 ～ 480.2 ～ 50-
1 Preventivo 102LSKH51 EquivalentStandard51 ～ 90--40 ～ 80--0.2 ～ 500.2 ～ 480.2 ～ 50-

Loading...

  1. 1
  2. 2
  3. Avanti >>
 

Informazioni di base

Type Jector punch Surface treatment None

Configura

Ripristina

106Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel

    Ripristina

  • Punch shank (mounting part) shape

    • Standard
    • With locating dowel hole

    Ripristina

  • D (Outer diameter)(mm)

    • 5
    • 6
    • 8
    • 10
    • 13
    • 16
    • 20
    • 25
    • 32
    • 38
    • 45

    Ripristina

  • A(mm)

     [1-90/0.1mmpezzi][1-90/1mmpezzi]

    Ripristina

  • B(mm)

     

    Ripristina

  • C(mm)

    • 0

     

    Ripristina

  • L (L dimension)(mm)

    • 40
    • 50
    • 60
    • 70
    • 80
    • 90
    • 100

     [40-120/10mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

    • LC

     [37-119.7/0.1mmpezzi]

    Ripristina

  • P(mm)

     

    Ripristina

  • Q(mm)

    • 0

     [0.2-50/0.01mmpezzi][0-9999/9999mmpezzi]

    Ripristina

  • R(mm)

    • 0

     [0.2-48/0.01mmpezzi]

    Ripristina

  • S(mm)

    • 0

     [0.2-50/0.01mmpezzi]

    Ripristina

  • W(mm)

     

    Ripristina

  • Tipo

    • PJ(2-12)H
    • PJ(2-18)J
    • PJ(2-7)L
    • PJ(3-29)K
    • SJ(2-12)H
    • SJ(2-18)J
    • SJ(2-7)L
    • SJ(3-29)K
    • SJ-C(2-12)H
    • SJ-C(2-18)J
    • SJ-C(2-8)L
    • SJ-C(3-29)K

    Ripristina

  • Tip shape

    • 2H
    • 2J
    • 2L
    • 3J
    • 3K
    • 3L
    • 4H
    • 4J
    • 4K
    • 4L
    • 5H
    • 5J
    • 5K
    • 5L
    • 6H
    • 6K
    • 7H
    • 7L
    • 8H
    • 8J
    • 8K
    • 8L
    • 9H
    • 9J
    • 9K
    • 10H
    • 10J
    • 10K
    • 11H
    • 11J
    • 12H
    • 12J
    • 13J
    • 13K
    • 14J
    • 14K
    • 15J
    • 15K
    • 16J
    • 17J
    • 17K
    • 18J
    • 18K
    • 20K
    • 21K
    • 22K
    • 23K
    • 25K
    • 27K
    • 28K
    • 29K

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.