• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

TSC series carbide long neck square end mill, 2-flute / long neck model (Codici componente)

TSC series carbide long neck square end mill, 2-flute / long neck model

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

  • TSC series carbide long neck square end mill, 2-flute / long neck model
  • TSC series carbide long neck square end mill, 2-flute / long neck model
  • Sconto volumi elevati

MISUMI

MISUMI

[Caratteristiche] -Dimostra elevate prestazioni nella lavorazione di acciai generici, EN 1.4301 Equiv. (SUS304) e acciai trattati termicamente (fino a 50 HRC) -Può selezionare la lunghezza ottimale del corpo per la lavorazione di parti profonde del pezzo -Ottimo per la lavorazione nell'intervallo di rotazione medio-basso grazie all'angolo elicoidale universale di 30° -E' dotato di un rivestimento con elevata resistenza all'ossidazione e alta durezza e raggiunge una lunga durata. Efficace nella lavorazione ad alta velocità e nella lavorazione a secco come caratteristiche del rivestimento.
  • TS
  • General Steel
  • 2 Flutes

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

Numero di dati da visualizzare
30
45
60
  1. << Indietro
  2. 1
  3. 2
Codice componente
TSC-EM2LB1.2-10
TSC-EM2LB1.2-12
TSC-EM2LB1.2-16
TSC-EM2LB1.5-6
TSC-EM2LB1.5-8
TSC-EM2LB1.5-10
TSC-EM2LB1.5-12
TSC-EM2LB1.5-14
TSC-EM2LB1.5-16
TSC-EM2LB1.5-18
TSC-EM2LB1.5-20
TSC-EM2LB2-6
TSC-EM2LB2-8
TSC-EM2LB2-10
TSC-EM2LB2-10-6
TSC-EM2LB2-12
TSC-EM2LB2-14
TSC-EM2LB2-16
TSC-EM2LB2-18
TSC-EM2LB2-20
TSC-EM2LB2-25
TSC-EM2LB2-30
TSC-EM2LB2.5-8
TSC-EM2LB2.5-12
TSC-EM2LB2.5-16
TSC-EM2LB2.5-20
TSC-EM2LB2.5-25
TSC-EM2LB2.5-30
TSC-EM2LB3-8
TSC-EM2LB3-12
TSC-EM2LB3-16
TSC-EM2LB3-20
TSC-EM2LB3-25
TSC-EM2LB3-30
TSC-EM2LB3-40
TSC-EM2LB4-12
TSC-EM2LB4-16
TSC-EM2LB4-20
TSC-EM2LB4-30
TSC-EM2LB4-40
TSC-EM2LB5-16
TSC-EM2LB5-25
TSC-EM2LB5-35
TSC-EM2LB5-50
TSC-EM2LB6-20
TSC-EM2LB6-30
TSC-EM2LB6-40
TSC-EM2LB6-50
TSC-EM2LB6-60
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Outer Diameter (D)
(φ) 		Flute Length (ℓ)
(mm) 		Shank Diameter (d)
(mm) 		Overall Length (L)
(mm) 		Length Under Neck (ℓ1)
(mm) 		Processing Applications Geometry Torsion Angle (θ) Additional Classification Figure ● Inventory Product □ Manufacturer Product Under Neck Diameter d1
(mm) 		Actual Effective Length Depends on Work Inclination Angle 30'
(mm) 		Actual Effective Length Depends on Work Inclination Angle 1°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 2°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 3°
(mm) 		Length Under Neck (θ)

16.81 €

1 Disponibile 5 giorni 1.21.845010Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.1510.4710.9912.2113.7310°

16.81 €

1 Disponibile 5 giorni 1.21.845012Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.1512.5713.1914.6516.4810°

17.62 €

1 Disponibile 5 giorni 1.21.845016Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.1516.7517.5819.5321.9710°

15.86 €

1 Disponibile 5 giorni 1.52.34506Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.456.286.597.328.2410°

15.86 €

1 Disponibile 5 giorni 1.52.34508Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.458.388.799.7610.9810°

16.81 €

1 Disponibile 5 giorni 1.52.345010Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.4510.4710.9912.2113.7310°

16.81 €

1 Disponibile 5 giorni 1.52.345012Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.4512.5713.1914.6516.4810°

17.18 €

1 Disponibile 5 giorni 1.52.345014Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.4514.6615.3917.0919.2210°

17.18 €

1 Disponibile 5 giorni 1.52.345016Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.4516.7517.5819.5321.9710°

18.13 €

1 Disponibile 5 giorni 1.52.347018Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.4518.8519.7821.9724.7110°

18.13 €

1 Disponibile 5 giorni 1.52.347020Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.4520.9421.9824.41Without Interference10°

15.89 €

1 Disponibile 5 giorni 234506Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.956.286.597.328.2410°

16.84 €

1 Disponibile 5 giorni 234508Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.958.388.799.7610.9810°

16.75 €

1 Disponibile 5 giorni 2345010Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.9510.4710.9912.2113.7310°

39.95 €

1 Disponibile 5 giorni 2365010Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.9510.3110.6511.412.2715°

16.10 €

1 Disponibile 5 giorni 2345012Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.9512.5713.1914.6516.4810°

16.28 €

1 Disponibile 5 giorni 2345014Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.9514.6615.3917.0919.2210°

16.10 €

1 Disponibile 5 giorni 2345016Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.9516.7517.5819.53Without Interference10°

17.60 €

1 Disponibile 5 giorni 2347018Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.9518.8519.7821.97Without Interference10°

18.80 €

1 Disponibile 5 giorni 2347020Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.9520.9421.9824.41Without Interference10°

17.60 €

1 Disponibile 5 giorni 2347025Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.9526.1827.47Without InterferenceWithout Interference10°

17.60 €

1 Disponibile 5 giorni 2347030Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●1.9531.4132.97Without InterferenceWithout Interference10°

19.08 €

1 Disponibile 5 giorni 2.53.84508Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●2.48.388.799.7610.9810°

16.84 €

1 Disponibile 5 giorni 2.53.845012Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●2.412.5713.1914.65Without Interference10°

17.60 €

1 Disponibile 5 giorni 2.53.845016Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●2.416.7517.5819.53Without Interference10°

17.99 €

1 Disponibile 5 giorni 2.53.847020Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●2.420.9421.98Without InterferenceWithout Interference10°

18.17 €

1 Disponibile 5 giorni 2.53.847025Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●2.426.1827.47Without InterferenceWithout Interference10°

18.17 €

1 Disponibile 5 giorni 2.53.847030Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●2.431.4132.97Without InterferenceWithout Interference10°

28.68 €

1 Disponibile 5 giorni 34.56508Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●2.98.388.799.7610.9810°

22.03 €

1 Disponibile 5 giorni 34.565012Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●2.912.5713.1914.6516.4810°

22.20 €

1 Disponibile 5 giorni 34.567016Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●2.916.7517.5819.5321.9710°

21.57 €

1 Disponibile 5 giorni 34.567020Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●2.920.9421.9824.4127.4610°

21.57 €

1 Disponibile 5 giorni 34.567025Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●2.926.1827.4730.51Without Interference10°

24.67 €

1 Disponibile 5 giorni 34.567030Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●2.931.4132.9736.62Without Interference10°

22.59 €

1 Disponibile 5 giorni 34.5610040Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●2.941.8843.96Without InterferenceWithout Interference10°

30.72 €

1 Disponibile 5 giorni 4665012Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●3.812.5713.1914.6516.4810°

25.04 €

1 Disponibile 5 giorni 4665016Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●3.816.7517.5819.53Without Interference10°

22.80 €

1 Disponibile 5 giorni 4667020Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●3.820.9421.9824.41Without Interference10°

24.23 €

1 Disponibile 5 giorni 4667030Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●3.831.4132.97Without InterferenceWithout Interference10°

29.79 €

1 Disponibile 5 giorni 46610040Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●3.841.8843.96Without InterferenceWithout Interference10°

29.08 €

1 Disponibile 5 giorni 57.567016Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●4.816.7517.58Without InterferenceWithout Interference10°

30.05 €

1 Disponibile 5 giorni 57.567025Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●4.826.1827.47Without InterferenceWithout Interference10°

30.99 €

1 Disponibile 5 giorni 57.5610035Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●4.836.65Without InterferenceWithout InterferenceWithout Interference10°

66.05 €

1 Disponibile 5 giorni 57.5610050Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product1●4.852.35Without InterferenceWithout InterferenceWithout Interference10°

27.21 €

1 Disponibile 5 giorni 6967020Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product2●5.8Without InterferenceWithout InterferenceWithout InterferenceWithout Interference10°

29.08 €

1 Disponibile 5 giorni 6967030Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product2●5.8Without InterferenceWithout InterferenceWithout InterferenceWithout Interference10°

34.80 €

1 Disponibile 5 giorni 69610040Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product2●5.8Without InterferenceWithout InterferenceWithout InterferenceWithout Interference10°

44.25 €

1 Disponibile 5 giorni 69610050Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product2●5.8Without InterferenceWithout InterferenceWithout InterferenceWithout Interference10°

75.52 €

1 Disponibile 5 giorni 69610060Flat Surface / Side Surface / Scanalatura / Inclined CuttingCon puntaleStandard Helix (30 to 40°)Stocked Product2●5.8Without InterferenceWithout InterferenceWithout InterferenceWithout Interference10°

Loading...

  1. << Indietro
  2. 1
  3. 2

Specifiche

TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Shank Diameter
d		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Under Neck Angle
θ		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
0.1 0.3 - 4 No Standards ● 0.2 0.085 50 10° 0.31 0.33 0.37 0.41 1
0.5 No Standards ● 0.52 0.55 0.61 0.69
1 No Standards ● 1.05 1.10 1.22 1.37
0.2 0.5 - 4 No Standards ● 0.3 0.18 50 10° 0.52 0.55 0.61 0.69 1
1 ● ● 1.05 1.10 1.22 1.37
1.5 ● ● 1.57 1.65 1.83 2.06
2 No Standards ● 2.09 2.20 2.44 2.75
2.5 No Standards ● 2.62 2.75 3.05 3.43
3 No Standards ● 3.14 3.30 3.66 4.12
3.5 No Standards ● 3.66 3.85 4.27 4.81
4 No Standards ● 4.19 4.40 4.88 5.49
0.3 1 - 4 ● ● 0.45 0.28 50 10° 1.05 1.10 1.22 1.37 1
1.5 No Standards ● 1.57 1.65 1.83 2.06
2 ● ● 2.09 2.20 2.44 2.75
2.5 No Standards ● 2.62 2.75 3.05 3.43
3 ● ● 3.14 3.30 3.66 4.12
4 ● ● 4.19 4.40 4.88 5.49
5 ● ● 5.24 5.49 6.10 6.87
6 No Standards ● 6.28 6.59 7.32 8.24
9 No Standards ● 9.42 9.89 10.98 12.36
0.4 1 - 4 No Standards ● 0.6 0.37 50 10° 1.05 1.10 1.22 1.37 1
2 ● ● 2.09 2.20 2.44 2.75
2 6 6 ● ● 15° 2.06 2.13 2.28 2.45
3 - 4 ● ● 10° 3.14 3.30 3.66 4.12
4 ● ● 4.19 4.40 4.88 5.49
5 ● ● 5.24 5.49 6.10 6.87
6 ● ● 6.28 6.59 7.32 8.24
7 No Standards ● 7.33 7.69 8.54 9.61
8 No Standards ● 8.38 8.79 9.76 10.98
9 No Standards ● 9.42 9.89 10.98 12.36
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Shank Diameter
d		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Under Neck Angle
θ		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
0.5 1 - 4 No Standards ● 0.7 0.46 50 10° 1.05 1.10 1.22 1.37 1
2 ● ● 2.09 2.20 2.44 2.75
3 No Standards ● 3.14 3.30 3.66 4.12
4 ● ● 4.19 4.40 4.88 5.49
4 6 6 ● ● 15° 4.13 4.26 4.56 4.91
5 - 4 No Standards ● 10° 5.24 5.49 6.10 6.87
6 ● ● 6.28 6.59 7.32 8.24
7 No Standards ● 7.33 7.69 8.54 9.61
8 ● ● 8.38 8.79 9.76 10.98
9 No Standards ● 9.42 9.89 10.98 12.36
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
15 ● ● 15.71 16.48 18.31 20.60
0.6 2 - 4 ● ● 0.9 0.56 50 10° 2.09 2.20 2.44 2.75 1
3 No Standards ● 3.14 3.30 3.66 4.12
4 ● ● 4.19 4.40 4.88 5.49
4 6 6 ● ● 15° 4.13 4.26 4.56 4.91
6 - 4 ● ● 10° 6.28 6.59 7.32 8.24
7 No Standards ● 7.33 7.69 8.54 9.61
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
15 ● ● 15.71 16.48 18.31 20.60
18 No Standards ● 70 18.85 19.78 21.97 24.71
0.7 2 - 4 ● ● 1.05 0.66 50 10° 2.09 2.20 2.44 2.75 1
4 ● ● 4.19 4.40 4.88 5.49
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
0.8 4 - 4 ● ● 1.2 0.76 50 10° 4.19 4.40 4.88 5.49 1
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 21.97
20 No Standards ● 70 20.94 21.98 24.41 27.46
24 No Standards ● 25.13 26.38 29.29 Without Interference
0.9 4 - 4 No Standards ● 1.35 0.85 50 10° 4.19 4.40 4.88 5.49 1
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
15 No Standards ● 15.71 16.48 18.31 20.60
1 3 - 4 No Standards ● 1.5 0.95 50 10° 3.14 3.30 3.66 4.12 1
4 ● ● 4.19 4.40 4.88 5.49
5 No Standards ● 5.24 5.49 6.10 6.87
6 ● ● 6.28 6.59 7.32 8.24
6 6 6 ● ● 15° 6.19 6.39 6.84 7.36
7 - 4 No Standards ● 10° 7.33 7.69 8.54 9.61
8 ● ● 8.38 8.79 9.76 10.98
9 No Standards ● 9.42 9.89 10.98 12.36
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 ● ● 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 21.97
18 No Standards ● 70 18.85 19.78 21.97 24.71
20 ● ● 20.94 21.98 24.41 27.46
22 No Standards ● 23.04 24.18 26.85 Without Interference
25 ● ● 26.18 27.47 30.51 Without Interference
30 ● ● 31.41 32.97 36.62 Without Interference
1.2 6 - 4 ● ● 1.8 1.15 50 10° 6.28 6.59 7.32 8.24 1
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
16 ● ● 16.75 17.58 19.53 21.97

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Shank Diameter
d		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Under Neck Angle
θ		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
1.4 6 - 4 No Standards ● 2.1 1.35 50 10° 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 21.97
1.5 4 - 4 No Standards ● 2.3 1.45 50 10° 4.19 4.40 4.88 5.49 1
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 ● ● 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 21.97
18 ● ● 70 18.85 19.78 21.97 24.71
20 ● ● 20.94 21.98 24.41 Without Interference
25 No Standards ● 26.18 27.47 30.51 Without Interference
30 No Standards ● 31.41 32.97 Without Interference Without Interference
35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
40 No Standards ● 41.88 43.96 Without Interference Without Interference
45 No Standards ● 47.12 49.45 Without Interference Without Interference
1.6 6 - 4 No Standards ● 2.4 1.55 50 10° 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 21.97
18 No Standards ● 70 18.85 19.78 21.97 Without Interference
20 No Standards ● 20.94 21.98 24.41 Without Interference
26 No Standards ● 27.22 28.57 31.73 Without Interference
1.8 6 - 4 No Standards ● 2.7 1.75 50 10° 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 Without Interference
18 No Standards ● 70 18.85 19.78 21.97 Without Interference
20 No Standards ● 20.94 21.98 24.41 Without Interference
25 No Standards ● 26.18 27.47 30.51 Without Interference
2 6 - 4 ● ● 3 1.95 50 10° 6.28 6.59 7.32 8.24 1
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
10 6 6 ● ● 15° 10.31 10.65 11.40 12.27
12 - 4 ● ● 10° 12.57 13.19 14.65 16.48
14 ● ● 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 Without Interference
18 ● ● 70 18.85 19.78 21.97 Without Interference
20 ● ● 20.94 21.98 24.41 Without Interference
25 ● ● 26.18 27.47 Without Interference Without Interference
30 ● ● 31.41 32.97 Without Interference Without Interference
35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
40 No Standards ● 41.88 43.96 Without Interference Without Interference
50 No Standards ● 52.35 54.95 Without Interference Without Interference
60 No Standards ● 62.83 Without Interference Without Interference Without Interference
2.5 8 - 4 ● ● 3.8 2.4 50 10° 8.38 8.79 9.76 10.98 1
10 No Standards ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 Without Interference
14 No Standards ● 14.66 15.39 17.09 Without Interference
16 ● ● 16.75 17.58 19.53 Without Interference
18 No Standards ● 70 18.85 19.78 Without Interference Without Interference
20 ● ● 20.94 21.98 Without Interference Without Interference
25 ● ● 26.18 27.47 Without Interference Without Interference
30 ● ● 31.41 32.97 Without Interference Without Interference
40 No Standards ● 100 41.88 Without Interference Without Interference Without Interference
50 No Standards ● 52.35 Without Interference Without Interference Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Shank Diameter
d		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Under Neck Angle
θ		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
3 8 - 6 ● ● 4.5 2.9 50 10° 8.38 8.79 9.76 10.98 1
10 No Standards ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 No Standards ● 70 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 21.97
18 No Standards ● 18.85 19.78 21.97 24.71
20 ● ● 20.94 21.98 24.41 27.46
25 ● ● 26.18 27.47 30.51 Without Interference
30 ● ● 31.41 32.97 36.62 Without Interference
40 ● ● 100 41.88 43.96 Without Interference Without Interference
45 No Standards ● 47.12 49.45 Without Interference Without Interference
50 No Standards ● 52.35 54.95 Without Interference Without Interference
4 12 - 6 ● ● 6 3.8 50 10° 12.57 13.19 14.65 16.48 1
16 ● ● 16.75 17.58 19.53 Without Interference
20 ● ● 70 20.94 21.98 24.41 Without Interference
25 No Standards ● 26.18 27.47 Without Interference Without Interference
30 ● ● 31.41 32.97 Without Interference Without Interference
35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
40 ● ● 41.88 43.96 Without Interference Without Interference
45 No Standards ● 47.12 49.45 Without Interference Without Interference
50 No Standards ● 52.35 54.95 Without Interference Without Interference
5 16 - 6 ● ● 7.5 4.8 70 10° 16.75 17.58 Without Interference Without Interference 1
20 No Standards ● 20.94 21.98 Without Interference Without Interference
25 ● ● 26.18 27.47 Without Interference Without Interference
30 No Standards ● 31.41 Without Interference Without Interference Without Interference
35 ● ● 100 36.65 Without Interference Without Interference Without Interference
40 No Standards ● 41.88 Without Interference Without Interference Without Interference
50 ● ● 52.35 Without Interference Without Interference Without Interference
6 20 - 6 ● ● 9 5.8 70 10° Without Interference Without Interference Without Interference Without Interference 2
30 ● ● Without Interference Without Interference Without Interference Without Interference
40 ● ● 100 Without Interference Without Interference Without Interference Without Interference
50 ● ● Without Interference Without Interference Without Interference Without Interference
60 ● ● Without Interference Without Interference Without Interference Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
LN-TSC-PEM2S (Sharp Edge / Manufactured Product) / LN-TSC-EM2S (Standard / Manufactured Product)

Outer Diameter
D		 Length Under Neck ℓ1
1 mm Increment Designation		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Figure
1.5 8 ~ 20 4 ● ● 3 1.45 40 3
1.6 9 ~ 20 4 ● ● 3.2 1.55 40 3
1.8 9 ~ 20 4 ● ● 3.6 1.75 40 3
2 9 ~ 21 4 ● ● 4 1.95 40 3
2.5 10 ~ 22 4 ● ● 5 2.4 40 3
3 11 ~ 21 6 ● ● 6 2.9 45 3
4 13 ~ 23 6 ● ● 8 3.8 45 3
5 15 ~ 25 6 ● ● 10 4.8 45 3

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number

Più Informazioni


● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.


TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

Informazioni di base

Work Material General Steel / Heat-Treated Steel / Acciaio inox / Ghisa / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 2 Model Long Neck Square
Coating For High Hardness (Silicone-Based) Tolerance of OD(mm) 0 ~ -0.02

Configura

Ripristina

109Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Outer Diameter (D)(φ)

    • 0.1
    • 0.2
    • 0.3
    • 0.4
    • 0.5
    • 0.6
    • 0.7
    • 0.8
    • 0.9
    • 1
    • 1.2
    • 1.4
    • 1.5
    • 1.6
    • 1.8
    • 2
    • 2.5
    • 3
    • 4
    • 5
    • 6

    Ripristina

  • Flute Length (ℓ)(mm)

    • 0.2
    • 0.3
    • 0.45
    • 0.6
    • 0.7
    • 0.9
    • 1.05
    • 1.2
    • 1.35
    • 1.5
    • 1.8
    • 2.1
    • 2.3
    • 2.4
    • 2.7
    • 3
    • 3.2
    • 3.6
    • 3.8
    • 4
    • 4.5
    • 5
    • 6
    • 7.5
    • 8
    • 9
    • 10

    Ripristina

  • Shank Diameter (d)(mm)

    • 4
    • 6

    Ripristina

  • Overall Length (L)(mm)

    • 40
    • 45
    • 50
    • 70
    • 100

    Ripristina

  • Length Under Neck (ℓ1)(mm)

    • 0.3
    • 0.5
    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 12
    • 14
    • 15
    • 16
    • 18
    • 20
    • 22
    • 24
    • 25
    • 26
    • 30
    • 35
    • 40
    • 45
    • 50
    • 60

     [8-25/1mmpezzi]

    Ripristina

  • Processing Applications

    • Flat Surface
    • Side Surface
    • Scanalatura
    • Inclined Cutting
    • Countersunk

    Ripristina

  • Torsion Angle (θ)

    • Standard Helix (30 to 40°)
    • Powerful Helix (45° to 60°)

    Ripristina

  • Additional Classification

    • Manufactured Product
    • Stocked Product

    Ripristina

  • Tipo

    • LN-TSC-EM2S
    • LN-TSC-PEM2S
    • TSC-EM2LB
    • TSC-PEM2LB

    Ripristina

  • Geometry

    • Sharp Corner
    • Con puntale

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • 5 giorni o meno
    • 8 giorni o meno

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.