TSC series carbide roughing end mill, fine pitch / regular model
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
- Sconto volumi elevati
- TS
- General Steel
- R (Regular)
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Codice componente
|
|---|
| SN-TSC-RFPR6-[20-42/1]-15 |
| TSC-RFPR3 |
| TSC-RFPR4 |
| TSC-RFPR5 |
| TSC-RFPR6 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 giorni | 6 | 15 | 3 | 6 | 60 | 20 ～ 42 | Flat Surface / Side Surface / Scanalatura / Inclined Cutting | Standard Neck Relief | 2 | □ | ||
154.29 € | 1 | Disponibile | 5 giorni | 3 | 15 | 3 | 6 | 60 | - | Flat Surface / Side Surface / Scanalatura / Inclined Cutting | Stocked Product | 1 | ● | |
130.60 € | 1 | Disponibile | 5 giorni | 4 | 15 | 3 | 6 | 60 | - | Flat Surface / Side Surface / Scanalatura / Inclined Cutting | Stocked Product | 1 | ● | |
67.48 € | 1 | Disponibile | 5 giorni | 5 | 15 | 3 | 6 | 60 | - | Flat Surface / Side Surface / Scanalatura / Inclined Cutting | Stocked Product | 1 | ● | |
57.35 € | 1 | Disponibile | 5 giorni | 6 | 15 | 3 | 6 | 60 | - | Flat Surface / Side Surface / Scanalatura / Inclined Cutting | Stocked Product | 2 | ● |
Loading...
Specifiche
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Number of Flutes | Figure | |
| Outer Diameter D |
||||||
| TSC-RFPR | 3 | 15 | 60 | 6 | 3 | 1 |
| 4 | 15 | 60 | 6 | 3 | 1 | |
| 5 | 15 | 60 | 6 | 3 | 1 | |
| 6 | 15 | 60 | 6 | 3 | 2 | |
| 8 | 20 | 75 | 8 | 4 | 2 | |
| 9 | 20 | 75 | 10 | 4 | 1 | |
| 10 | 25 | 75 | 10 | 4 | 2 | |
| 11 | 25 | 75 | 12 | 4 | 1 | |
| 12 | 30 | 100 | 12 | 4 | 2 | |
| 13 | 30 | 100 | 12 | 4 | 3 | |
| 14 | 35 | 100 | 12 | 4 | 3 | |
| 16 | 40 | 110 | 16 | 4 | 2 | |
| 18 | 45 | 110 | 16 | 4 | 3 | |
| 20 | 45 | 130 | 20 | 4 | 2 |
For Cutting Conditions, Refer to >>Click here.
Più Informazioni
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● It adopts a fine pitch nick that delivers a finish with good surface roughness after machining.
Informazioni di base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acciaio inox / Ghisa / Aluminum Alloy / Copper Alloy | Model | Sgrossatura | Coating | For High Hardness (Silicone-Based) |
|---|---|---|---|---|---|
| Geometry | Ultra-Small R | Torsion Angle (θ) | Weak Helix (15 to 25°) | Tolerance of OD(mm) | ±0.06 |
Configura
Proprietà di base
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Additional Classification
- Standard Neck Relief
- Stocked Product
-
Tipo
- SN-TSC-RFPR
- TSC-RFPR
-
Processing Applications
- Flat Surface
- Side Surface
- Scanalatura
- Inclined Cutting
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
- 8 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.