• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

  • Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
  • Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

MISUMI

MISUMI

[Caratteristiche] Fresa di variazione in grado di determinare la dimensione dello smusso d'angolo delle frese in metallo duro con incrementi di 0,1 mm Può essere riaffilata. Per informazioni su procedure di applicazione, gamma di servizi, prezzi, ecc. consultare la pagina "Servizio di riaffilatura".
  • Non-Coated
  • General Steel

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill:Related Image
Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
TSC-CEM2B2-C[0.1-0.5/0.1]
TSC-CEM2B4-C[0.1-1/0.1]
TSC-CEM2B5-C[0.1-1/0.1]
TSC-CEM2B6-C[0.1-1.2/0.1]
TSC-CEM2B8-C[0.1-1.4/0.1]
TSC-CEM2B10-C[0.1-3/0.1]
TSC-CEM2B12-C[0.1-3/0.1]
TSC-CEM2R2-C[0.1-0.5/0.1]
TSC-CEM2R3-C[0.1-0.7/0.1]
TSC-CEM2R4-C[0.1-1/0.1]
TSC-CEM2R10-C[0.1-3/0.1]
TSC-CEM2S2-C[0.1-0.5/0.1]
TSC-CEM2S4-C[0.1-1/0.1]
TSC-CEM2S6-C[0.1-1.2/0.1]
TSC-CEM2SR4-C[0.1-1/0.1]
TSC-CEM2SR12-C[0.1-3/0.1]
TSC-CEM4B3-C[0.1-0.7/0.1]
TSC-CEM4B4-C[0.1-1/0.1]
TSC-CEM4B5-C[0.1-1/0.1]
TSC-CEM4B6-C[0.1-1.2/0.1]
TSC-CEM4B8-C[0.1-1.4/0.1]
TSC-CEM4B10-C[0.1-3/0.1]
TSC-CEM4R3-C[0.1-0.7/0.1]
TSC-CEM4R4-C[0.1-1/0.1]
TSC-CEM4R10-C[0.1-3/0.1]
TSC-CEM4R12-C[0.1-3/0.1]
TSC-CEM4S3-C[0.1-0.7/0.1]
TSC-CEM4S4-C[0.1-1/0.1]
TSC-CEM4S5-C[0.1-1/0.1]
TSC-CEM4S6-C[0.1-1.2/0.1]
TSC-CEM4S10-C[0.1-3/0.1]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Outer Diameter (D)
(φ) 		Work Material Flute Length (ℓ)
(mm) 		Number of Flutes
(sheet) 		Coating Shank Diameter (d)
(mm) 		Overall Length (L)
(mm) 		Processing Applications Corner (C)
(mm) 		Figure

-

1 13 giorni 2General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]32For High Hardness (Silicone-Based)440Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 0.51

-

1 13 giorni 4General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]62For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 11

-

1 13 giorni 5General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]7.52For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 11

-

1 13 giorni 6General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]92For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 1.22

-

1 13 giorni 8General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]122For High Hardness (Silicone-Based)860Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 1.42

-

1 13 giorni 10General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]152For High Hardness (Silicone-Based)1070Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 32

-

1 13 giorni 12General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]182For High Hardness (Silicone-Based)1275Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 32

-

1 13 giorni 2General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]62For High Hardness (Silicone-Based)445Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 0.51

-

1 13 giorni 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]92For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 0.71

-

1 13 giorni 4General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]122For High Hardness (Silicone-Based)650Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 11

-

1 13 giorni 10General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]302For High Hardness (Silicone-Based)1080Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 32

-

1 13 giorni 2General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]42For High Hardness (Silicone-Based)440Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 0.51

-

1 13 giorni 4General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]82For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 11

-

1 13 giorni 6General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]122For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 1.22

-

1 13 giorni 4General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]102For High Hardness (Silicone-Based)650Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 11

-

1 13 giorni 12General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]302For High Hardness (Silicone-Based)1285Flat Surface / Side Surface / Scanalatura / Inclined Cutting0.1 ～ 32

-

1 13 giorni 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]4.54For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Inclined Cutting0.1 ～ 0.71

-

1 13 giorni 4General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]64For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Inclined Cutting0.1 ～ 11

-

1 13 giorni 5General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]7.54For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Inclined Cutting0.1 ～ 11

-

1 13 giorni 6General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]94For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Inclined Cutting0.1 ～ 1.22

-

1 13 giorni 8General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]124For High Hardness (Silicone-Based)855Flat Surface / Side Surface / Inclined Cutting0.1 ～ 1.42

-

1 13 giorni 10General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]154For High Hardness (Silicone-Based)1065Flat Surface / Side Surface / Inclined Cutting0.1 ～ 32

-

1 13 giorni 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]94For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Inclined Cutting0.1 ～ 0.71

-

1 13 giorni 4General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]124For High Hardness (Silicone-Based)650Flat Surface / Side Surface / Inclined Cutting0.1 ～ 11

-

1 13 giorni 10General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]304For High Hardness (Silicone-Based)1080Flat Surface / Side Surface / Inclined Cutting0.1 ～ 32

-

1 13 giorni 12General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]364For High Hardness (Silicone-Based)1285Flat Surface / Side Surface / Inclined Cutting0.1 ～ 32

-

1 13 giorni 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]64For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Inclined Cutting0.1 ～ 0.71

-

1 13 giorni 4General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]84For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Inclined Cutting0.1 ～ 11

-

1 13 giorni 5General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]104For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Inclined Cutting0.1 ～ 11

-

1 13 giorni 6General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]124For High Hardness (Silicone-Based)645Flat Surface / Side Surface / Inclined Cutting0.1 ～ 1.22

-

1 13 giorni 10General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]204For High Hardness (Silicone-Based)1065Flat Surface / Side Surface / Inclined Cutting0.1 ～ 32

Loading...

  1. 1

Specifiche

Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill:Related Image

Model Number
SEC-CEM2B / TSC-CEM2B
SEC-CEM4B / TSC-CEM4B (1.5 D Blade Length Type)
Flute Diameter
D		Corner C
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
20.1 ~ 0.534041
2.50.1 ~ 0.53.754041
30.1 ~ 0.74.54561
3.50.1 ~ 0.75.254561
40.1 ~ 1.064561
4.50.1 ~ 1.06.754561
50.1 ~ 1.07.54561
5.50.1 ~ 1.08.254561
60.1 ~ 1.294562
80.1 ~ 1.4126082
100.1 ~ 3.01570102
120.1 ~ 3.01875122
160.1 ~ 3.024100162
200.1 ~ 3.030105202

Model Number
SEC-CEM2S / TSC-CEM2S
SEC-CEM4S /TSC-CEM4S (2 D Blade Length Type)
Flute Diameter
D		Corner C
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
20.1 ~ 0.544041
2.50.1 ~ 0.554041
2.80.1 ~ 0.55.64041
30.1 ~ 0.764561
3.50.1 ~ 0.774561
40.1 ~ 1.084561
4.50.1 ~ 1.094561
50.1 ~ 1.0104561
5.50.1 ~ 1.0114561
60.1 ~ 1.2124562
80.1 ~ 1.4165582
100.1 ~ 3.02065102
120.1 ~ 3.02475122
160.1 ~ 3.032100162
200.1 ~ 3.040105202

Model Number
SEC-CEM2SR / TSC-CEM2SR (2.5 D Blade Length Type)
Flute Diameter
D		Corner C
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.77.54561
40.1 ~ 1.0105061
50.1 ~ 1.012.55561
60.1 ~ 1.2156062
80.1 ~ 1.4207082
100.1 ~ 3.02580102
120.1 ~ 3.03085122

Model Number
SEC-CEM2R / TSC-CEM2R
SEC-CEM4R / TSC-CEM4R (3D Blade Length Type)
Flute Diameter
D		Corner C
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
20.1 ~ 0.564541
2.50.1 ~ 0.57.54541
2.80.1 ~ 0.58.44541
30.1 ~ 0.794561
3.50.1 ~ 0.710.54561
40.1 ~ 1.0125061
4.50.1 ~ 1.013.55061
50.1 ~ 1.0155561
5.50.1 ~ 1.016.55561
60.1 ~ 1.2186062
80.1 ~ 1.4247082
100.1 ~ 3.03080102
120.1 ~ 3.03685122
160.1 ~ 3.048115162
200.1 ~ 3.060125202

Model Number
SEC-CEM2RL / TSC-CEM2RL (3.5 D Blade Length Type)
Flute Diameter
D		Corner C
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.710.54561
40.1 ~ 1.0145061
50.1 ~ 1.017.55561
60.1 ~ 1.2216062
80.1 ~ 1.4287082
100.1 ~ 3.03580102
120.1 ~ 3.04295122

Model Number
SEC-CEM2L / TSC-CEM2L (4 D Blade Length Type)
Flute Diameter
D		Corner C
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.7125061
40.1 ~ 1.0166061
50.1 ~ 1.0206061
60.1 ~ 1.2246062
80.1 ~ 1.43210082
100.1 ~ 3.040100102
120.1 ~ 3.048100122


For Cutting Conditions, Refer to >>Click here.

Informazioni di base

Model Tipo quadrato Geometry Con puntale Torsion Angle (θ) Standard Helix (30 to 40°)
Additional Classification Manufactured Product Tolerance of OD(mm) 0 ~ -0.02

Configura

Ripristina

31Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Outer Diameter (D)(φ)

    • 2
    • 2.5
    • 2.8
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Ripristina

  • Flute Length (ℓ)(mm)

    • 3
    • 4
    • 4.5
    • 5
    • 5.6
    • 6
    • 6.75
    • 7
    • 7.5
    • 8
    • 8.25
    • 8.4
    • 9
    • 10
    • 10.5
    • 11
    • 12
    • 12.5
    • 13.5
    • 14
    • 15
    • 16
    • 16.5
    • 17.5
    • 18
    • 20
    • 21
    • 24
    • 25
    • 28
    • 30
    • 32
    • 35
    • 36
    • 40
    • 42
    • 48
    • 60

    Ripristina

  • Number of Flutes(sheet)

    • 2
    • 4

    Ripristina

  • Coating

    • For High Hardness (Silicone-Based)
    • Senza rivestimento

    Ripristina

  • Shank Diameter (d)(mm)

    • 4
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Ripristina

  • Overall Length (L)(mm)

    • 40
    • 45
    • 50
    • 55
    • 60
    • 65
    • 70
    • 75
    • 80
    • 85
    • 95
    • 100
    • 105
    • 110
    • 130

    Ripristina

  • Processing Applications

    • Flat Surface
    • Side Surface
    • Scanalatura
    • Inclined Cutting

    Ripristina

  • Corner (C)(mm)

     [0.1-3/0.1mmpezzi]

    Ripristina

  • Tipo

    • SEC-CEM2□
    • SEC-CEM4□
    • TSC-CEM2□
    • TSC-CEM4□

    Ripristina

  • Work Material

    • General Steel
    • Heat-Treated Steel
    • High-Hardness Steel ~ HRC55
    • Acciaio inox
    • Ghisa
    • Aluminum Alloy
    • Copper Alloy

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • 7 giorni o meno
    • 9 giorni o meno
    • 13 giorni o meno

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.