KQG2S, Raccordi istantanei in acciaio inox 316, D'estremità diritto con esagono incassato
[Features]
· Compact and lightweight.
· Grease-free.
· Can be used with steam.
· Metal part: SUS316, Seal part: special FKM.
· Working fluid temperature: -5 to +150°C
· Conforms to the Food Sanitation Act of Japan. (Part materials conform to the tool and packaging container standards test.)
[Applications]
· A half union fitting for tight spaces with a hex socket in the body that can be tightened with a hex wrench.
(i)Nota
- For materials and specification details, please refer to the catalog.
- Product images may be representative images. Refer to the catalog for details.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Half Union Fitting With Hex Socket: KQG2S Outline Drawing And Dimensions
Millimeter size type
- Applicable tube: millimeter size
- Connection thread: M, R, Rc
Half Union Fitting With Hex Socket: KQG2S Outline Drawing (With M5)
Half Union Fitting With Hex Socket: KQG2S Outline Drawing (With R)
| Applicable tubing outer diameter (mm) | Connection thread: R, M | Model | H (width across flats) | øDNote 1) | L | A* | M | Effective cross-sectional area (mm2) Note 2) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|
| ø3.2 | M5 × 0.8 | KQG2S23-M5 | 2 | 9 | 16.5 | 13.5 | 12 | 3 | 3.8 |
| ø4 | M5 × 0.8 | KQG2S04-M5 | 2 | 9 | 17.1 | 14.1 | 12.6 | 4 | 3.7 |
| 1/8 | KQG2S04-01S | 3 | 10 | 19.6 | 16.5 | 4.1 | 7.6 | ||
| ø6 | M5 × 0.8 | KQG2S06-M5 | 2 | 12 | 19.6 | 16.6 | 13.6 | 4 | 7.4 |
| 1/8 | KQG2S06-01S | 4 | 20.6 | 17.5 | 10 | 8.7 | |||
| 1/4 | KQG2S06-02S | 14 | 15.9 | 10.7 | 14 | ||||
| ø8 | 1/8 | KQG2S08-01S | 5 | 14 | 24.7 | 21.6 | 16.1 | 17.2 | 12.3 |
| 1/4 | KQG2S08-02S | 6 | 22.9 | 18.2 | 23.3 | 12.8 | |||
| 3/8 | KQG2S08-03S | 17 | 23.1 | 18 | 22.8 | ||||
| ø10 | 1/8 | KQG2S10-01S | 5 | 17 | 25.6 | 22.5 | 17 | 17.2 | 17.7 |
| 1/4 | KQG2S10-02S | 8 | 27.5 | 22.8 | 39 | 19.1 | |||
| 3/8 | KQG2S10-03S | 24 | 18.9 | 20.9 | |||||
| 1/2 | KQG2S10-04S | 22 | 17.6 | 37.2 | |||||
| ø12 | 1/4 | KQG2S12-02S | 8 | 19 | 30.6 | 25.9 | 18.6 | 46 | 24.8 |
| 3/8 | KQG2S12-03S | 10 | 24.9 | 19.8 | 60 | 19.3 | |||
| 1/2 | KQG2S12-04S | 22 | 18.5 | 33.6 | |||||
| ø16 | 3/8 | KQG2S16-03S | 10 | 24.6 | 33.2 | 28.1 | 20.8 | 81 | 41.6 |
| 1/2 | KQG2S16-04S | 12 | 29.4 | 23 | 113 | 38.4 |
*Reference dimensions of R thread after installation
Note 1) øD is the maximum diameter.
Note 2) Value of FEP tubing. Value of nylon tubing for ø16 only.
Inch size type
- Applicable tube: inch size
- Connection thread: UNF, NPT
Half Union Fitting With Hex Socket: KQG2S outline drawing (with 10-32UNF)
Half Union Fitting With Hex Socket: KQG2S Outline Drawing (With NPT)
| Applicable tubing outer diameter (inch) | Connection thread: UNF, NPT | Model | H (width across flats) | øDNote 1) | L | A* | M | Effective cross-sectional area (mm2) Note 2) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|
| ø1/8 " | 10-32UNF | KQG2S01-32 | 2 | 9 | 16.5 | 13.5 | 12 | 3 | 3.8 |
| ø5/32 " | 10-32UNF | KQG2S03-32 | 2 | 9 | 17.1 | 14.1 | 12.6 | 4 | 3.7 |
| 1/8 | KQG2S03-N01S | 2.78 | 11 | 19.6 | 16.4 | 4.1 | 8.5 | ||
| ø1/4 " | 10-32UNF | KQG2S07-32 | 2 | 12 | 19.5 | 16.5 | 13.5 | 4 | 7.2 |
| 1/8 | KQG2S07-N01S | 4.76 | 20.5 | 17.3 | 10 | 8.1 | |||
| 1/4 | KQG2S07-N02S | 14 | 16.1 | 10.7 | 13.4 | ||||
| 3/8 | KQG2S07-N03S | 18 | 15.8 | 22.6 | |||||
| ø5/16 " | 1/8 | KQG2S09-N01S | 5.56 | 14 | 24.7 | 21.5 | 16.1 | 17.2 | 12 |
| 1/4 | KQG2S09-N02S | 6.35 | 23.1 | 18.7 | 23.3 | 12.8 | |||
| 3/8 | KQG2S09-N03S | 18 | 18.4 | 23.5 | |||||
| ø3/8 " | 1/8 | KQG2S11-N01S | 5.56 | 17 | 25.2 | 22 | 16.6 | 17.2 | 17.8 |
| 1/4 | KQG2S11-N02S | 6.35 | 27.1 | 22.7 | 39 | 21.2 | |||
| 3/8 | KQG2S11-N03S | 18 | 23.6 | 18.9 | 23.8 | ||||
| 1/2 | KQG2S11-N04S | 22 | 17.2 | 38.6 | |||||
| ø1/2 " | 1/4 | KQG2S13-N02S | 8 | 20 | 30.5 | 26.1 | 18.5 | 46 | 26.6 |
| 3/8 | KQG2S13-N03S | 9.53 | 29.4 | 24.7 | 60 | 29 | |||
| 1/2 | KQG2S13-N04S | 22 | 25.5 | 19.1 | 34.8 |
*Reference NPT thread dimensions after installation
Note 1) øD is the maximum diameter.
Note 2) Value of FEP tubing.
SUS316 One-Touch Pipe Fitting KQG2 Series Common Specifications (Reference)
Applicable tubing
- Tube materials: FEP, PFA, nylon, soft nylonNote 1), polyurethane, polyolefin
- Tube outer diameter (millimeter size): ø3.2, ø4, ø6, ø8, ø10, ø12, ø16
- Tube outer diameter (inch size): ø1/8, "ø5/32, "ø1/4, "ø5/16, "ø3/8, "ø1/2 "
Note 1) For soft nylon tube, water cannot be used.
Specifications
| Usable fluids | Air, water, steamNote 2) Note 3) |
|---|---|
| Operating pressure rangeNote 4) | -100 kPa to 1 MPaNote 5) |
| Proof pressure | 3.0 MPa |
| Ambient temperature and operating fluid temperatureNote 6) | -5 to 150°C (no freezing)Note 5) |
| Lubricant | Grease-free finish |
| Seal (thread portion) | With sealant |
Note 2) Confirm applicable tube separately.
Note 3) Using special FKM that is resistant to steam.
Note 4) It is not completely airtight, so please avoid use in leak testers, etc., where a vacuum is maintained.
Note 5) Please confirm operating pressure range and operating temperature range.
Note 6) Please equip an inner sleeve for the following conditions. (ø3.2, ø1/8 "are excluded)
· When using with fluids or in environments that have extreme temperature changes.
· When using at a high temperature.
Temperature conditions for equipping inner sleeve
| Tube used | Temperature |
|---|---|
| FEP tube / TH series | 80°C or more |
| Super PFA tube / TL series | 120°C or more |
Structural Drawing
SUS316 One-Touch Pipe Fitting KQG2 Series Structural Drawing
Components
| Number | Part Name | Material |
|---|---|---|
| 1 | Release button | SUS316 |
| 2 | Guide 1 | SUS316 |
| 3 | Guide 2 | SUS316 |
| 4 | Chuck | SUS316 |
| 5 | Seal | Special FKM (fluorine coated) |
| 6 | Male Connector body | SUS316 |
| 7 | Male Elbow body | SUS316 |
| 8 | O-ring | Special FKM (fluorine coated) |
| 9 | Stud | SUS316 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | D.E.1 tubo applicabile (φ) | Connection Type | Connection screw | |
|---|---|---|---|---|---|---|---|
11.69 € | 1 | 26 giorni | - | UNF | 10-32 | ||
11.85 € | 1 | 26 giorni | - | UNF | 10-32 | ||
12.18 € | 1 | 26 giorni | - | NPT | 1/8 | ||
12.18 € | 1 | 4 giorni | 4 | R | 1/8 | ||
11.85 € | 1 | 4 giorni | 4 | M | 5×0.8 | ||
12.48 € | 1 | 4 giorni | 6 | R | 1/8 | ||
16.05 € | 1 | 4 giorni | 6 | R | 1/4 | ||
12.53 € | 1 | 4 giorni | 6 | M | 5×0.8 | ||
12.53 € | 1 | 26 giorni | - | UNF | 10-32 | ||
12.48 € | 1 | 26 giorni | - | NPT | 1/8 | ||
16.05 € | 1 | 26 giorni | - | NPT | 1/4 | ||
16.05 € | 1 | 26 giorni | - | NPT | 3/8 | ||
17.61 € | 1 | 33 giorni | 8 | R | 1/8 | ||
17.61 € | 1 |
Stesso giorno
Stock | 8 | R | 1/4 | ||
30.23 € | 1 | 4 giorni | 8 | R | 3/8 | ||
17.61 € | 1 | 26 giorni | - | NPT | 1/8 | ||
17.52 € | 1 | 26 giorni | - | NPT | 1/4 | ||
26.98 € | 1 | 26 giorni | 10 | R | 1/8 | ||
26.97 € | 1 |
Stesso giorno
Stock | 10 | R | 1/4 | ||
31.68 € | 1 | 4 giorni | 10 | R | 3/8 | ||
39.15 € | 1 | 4 giorni | 10 | R | 1/2 | ||
26.98 € | 1 | 26 giorni | - | NPT | 1/8 | ||
26.97 € | 1 | 26 giorni | - | NPT | 1/4 | ||
31.68 € | 1 | 26 giorni | - | NPT | 3/8 | ||
33.73 € | 1 | 26 giorni | - | NPT | 1/2 | ||
41.68 € | 1 | 4 giorni | - | R | 1/4 | ||
41.68 € | 1 | 4 giorni | - | R | 3/8 | ||
49.79 € | 1 | 39 giorni | - | R | 1/2 | ||
41.68 € | 1 | 26 giorni | - | NPT | 1/4 | ||
41.68 € | 1 | 26 giorni | - | NPT | 3/8 | ||
36.79 € | 1 | 26 giorni | - | NPT | 1/2 | ||
60.92 € | 1 | 4 giorni | - | R | 3/8 | ||
75.15 € | 1 | 67 giorni | - | R | 1/2 | ||
11.69 € | 1 | 4 giorni | - | M | 5×0.8 |
Loading...
Informazioni di base
| Tipo | Ad azione singola/filettatura | Tipo raccordo | Direzione di montaggio a vite | Liquido applicabile | Acqua / Aria |
|---|---|---|---|---|---|
| Materiale corpo principale | Acciaio inox (EN 1.4401 Equiv.) | Applicazione | Standard/Mini | Materiale filettatura | Acciaio inox (EN 1.4401 Equiv.) |
| Montaggio a vite, direzione | Con testa esagonale e direzione dritta | Number of Connection Tubes(pc.) | 1 |
Configura
Stock
-
- Indicare solo prodotti a magazzino
Proprietà di base
-
D.E.1 tubo applicabile(φ)
-
Connection Type
- M
- NPT
- R
- UNF
-
Connection screw
- 1/2
- 1/4
- 1/8
- 3/8
- 5×0.8
- 10-32
-
Tipo
- KQG2S
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- Stesso giorno
- 4 giorni o meno
- 26 giorni o meno
- 33 giorni o meno
- 39 giorni o meno
- 67 giorni o meno
Attributi opzionali
- Product images may be representative images. Refer to the catalog for details.
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.