Collettore di liquido tipo con pressione scarico AEP100-02
[Features]
· These collectors help prevent waste by collecting valuable hydraulic fluid and lubricant that has leaked and built up in the vicinity of the machinery.
· These collectors save energy by employing the exhaust air from the switching valve, which would otherwise be simply released into the atmosphere.
· These collectors contribute to efficiency by eliminating the need for workers to carry out tasks such as collecting fluid and wiping down machinery.
(i)Nota
- For materials and specification details, please refer to the catalog.
- Product images may be representative images. Refer to the catalog for details.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
AEP100-02
Details of AEP100-02 Exhaust Pressure Type Liquid Collector
AEP100-02 Exhaust Pressure Type Liquid Collector product image
AEP100-02 Exhaust Pressure Type Liquid Collector Specifications
| Model | AEP100-02 |
|---|---|
| Collected fluid | Hydraulic fluid / lubricant |
| Applicable fluids | Air |
| Operating pressure | 200 to 700 kPa (0.2 to 0.7 MPa) |
| Fluid temperature | 5 to 60°C |
| Collected fluid temperature | 5 to 60°C |
| Collected fluid discharge volume | 10 mL/one time (at 0.5 MPa) |
| Collected fluid lifting range | 8 m (at 0.5 MPa) |
| Exhaust port effective area | 21 mm2<Cv1.1 > |
| Port size | 3-PT 1/4 |
| Filtration | 40 mesh (gauze) |
| Weight | 0.8 kg |
Working principle
Working principle
When the exhaust pressure from the switching valve enters into port (7), the piston (8) and diaphragm (6) compress and displace spring (4), the exhaust pressure is released into the atmosphere from exhaust port (9), and at the same time the diaphragm is returned to its original condition by the recovery power of the spring.
At this time, the diaphragm interior (10) is under negative pressure, causing the check ball (11) to be closed while check ball (13) is open, and causing built-up oil outside to enter into the diaphragm interior.
When exhaust pressure once again enters, operation of the piston and diaphragm causes the diaphragm to be compressed, and check ball (11) opens, causing the oil in the diaphragm interior to be discharged from discharge port (12).
AEP100-02 Exhaust Pressure Type Liquid Collector Dimensions
(Unit: mm)
AEP100-02 Exhaust Pressure Type Liquid Collector dimensional drawing
Codice componente
|
|---|
| AEP100-02 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | |
|---|---|---|---|---|
134.48 € | 1 | 4 giorni |
Loading...
Informazioni di base
| Tipo | Dispositivo di lubrificazione | Misura raccordo di collegamento | 3-PT 1/4 | Materiali | Corpo, cofano ADC12 (trattamento con cromatura), garza, molla: SUS304, O-ring: NBR |
|---|
Si trova sulla pagina di Collettore di liquido tipo con pressione scarico AEP100-02, il codice articolo è il seguente: AEP100-02.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto AEP100-02.
Configura
Proprietà di base
-
Tipo
- AEP100
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 4 giorni o meno
Attributi opzionali
- Product images may be representative images. Refer to the catalog for details.
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.