Connettori quadrati（Allowable Voltage：AC300）

?* Informazioni su tempi di consegna e prezzi

• 

  Alloggiamenti serie MRP

  HONDA TSUSHIN KOGYO

  Housing for the MRP series.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	2.10 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore quadrato multipin (SUMICON) serie 1600

  HIROSE ELECTRONIC

  The SUMICON 1600 series of rectangular multi-pin connectors are built using an original Hirose Electric design. These connectors can be used for a variety of different applications based on the combination of connector unit and case employed.
  
  [Features]
  · The same nine versions that are available in the 1300 series are available here, with the numbers of pins equal to 8, 12, 16, 20, 24, 28, 34, 45, or 60.
  · Connector units are available in soldering, wrapping, or crimping types.
  · Available accessories include C cases, CA cases, CBA cases, ST stoppers, STA stoppers, STB stoppers, and others. Combining connectors with these accessories opens up a wide range of possible applications.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	1.49 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Serie HKP

  HONDA TSUSHIN KOGYO

  2.54 mm pitch, straight, right angle through hole type connector.
  
  [Features]
  · Based on our original design, the contacts have provide highly reliable contact.
  · A wide range of connection combinations are possible from single circuit connections to multi-circuit connections.
  · Wire connection work is performed using a crimping machine that can perform wire connections for 3, 000 terminals/H and a hand tool for small lots is also available.
  · A UL-certified product is used as an insulator.
  · Reworking wiring mistakes is also simplified using the removal tool.
  ▪ Mating with FFC, MFC, HSC, DIC series is supported

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	2.32 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Serie MR

  HONDA TSUSHIN KOGYO

  Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	1.83 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore scheda-cavo per alimentatore interno con passo 3.5mm - Serie MDF6【1-100 Pezzi per confezione】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
  
  [Features]
  · Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
  · 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
  · Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	0.16 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per cavo a nastro, compatibile con 3A, serie HIF4

  HIROSE ELECTRONIC

  Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors (HIF3B, etc.), offering a wider range of use.
  
  [Features]
  · Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors such as HIF3B, offering a wider range of use.
  · With an automatic lock mechanism, exceptional reliability in the face of vibrational impact is ensured.
  · With an automatic extraction lever with lock release, an extraction tool is not required.
  · Compatible lines include the (UL2651) No. 24 AWG flat cable (7 wires/0.203 mm, external cover diameter of 1.0–1.2 mm).

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	3.65 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per rack e pannello, serie QR / P4

  HIROSE ELECTRONIC

  Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  • The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
  • The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
  • This product has obtained UL, CSA, and TUV certifications.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	2.65 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per rack e pannello, serie QR / P8

  HIROSE ELECTRONIC

  • Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.
  
  [Features]
  • Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
  • By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
  • In addition, terminals for signals are positioned with a 2-mm pitch.
  • The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
  • Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
  · The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
  • This product has obtained UL, CSA, and TUV certifications.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	0.12 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Tipo DIP dritto serie 17JE

  FUJIKURA (DDK)

  Straight DIP type connector which can be mounted vertically on a PCB.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	5.94 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettori saldati, serie 17JE

  FUJIKURA (DDK)

  [Features]
  · This hand soldered wiring connector features solder cup type contacts.
  · The number of pins can be 9, 15, 25, or 37.
  · Stranded cables of 22 AWG or lower are optimal. (Please use a 40 W or lower soldering iron.)
  · Surface treatment of the metal shell involves beat processing pin connectors with nickel plating.
  · The metalized hood on the cable/plug wiring parts also effectively shields from electromagnetic interferences.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	4.30 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettori Dip a L serie 17LE

  FUJIKURA (DDK)

  Connects to a circuit via dip soldering to PCB through-holes. The bracket is affixed to a PCB via fastening with screws.
  
  [Features]
  • Comes in 9, 15, 25, or 37 contact models.
  • A base and hex nuts can be installed for securing the coupling to the other side.
  • The surface of the metal shell is nickel-plated and the pin connectors are heat-treated.
  • Different types of grounding fixtures are available for the brackets, delivering even more reliable EMI shielding.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	8.76 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettori D-Sub - XM2 / XM3

  OMRON

  [Features]
  ・ These are D-sub connectors that are ideal for OA equipment interfaces.
  ・ These are shielded connectors for EMI countermeasures.
  ・ Effective measures to counter noise have been realized through the use of a plastic hood (XM2S) which has undergone metallization processing.
  ・ The multi-hole ferrite core installation type (XM3B-F) is now available as a series also.
  ・ It is good as a countermeasure for noise in the high-frequency regions, and also allows for space savings on the circuit board.
  ・ A compact, sturdy type with a metal shell.
  ・ Various fasteners and ground conductor fittings are available.
  ▪ UL standard (File No.E103202) certified products are used as standard (except for XM2S and some products).

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	4.11 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettori D-Sub XM3-L / XM2-L / XM4K / XM4L

  OMRON

  [Features]
  ・ This D-sub connector series has been renewed with lead-free compatible products.
  ・ The fastening screw diameter can be identified from its external appearance.
  ・ A solution to problems associated with combining fasteners has been found.
  ・ Shielded connectors for EMI countermeasures.
  ▪ This is a UL standard (File No.E103202) certified product (except for XM4Z type).

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	5.24 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore a pressione a filo discreto - XG5 (connettore a pressione a filo discreto)

  OMRON

  [Features]
  ・ A solution to the troublesome nature of discrete wire connections has been found.
  ・A press-fit socket connector for mating with MIL type plugs.
  ・Uses a 2-slot press-fit structure and insulation barrel to enable reliable and high current (3A) discrete wire press-fit connections.
  ・The use of a wide range of covers to fit the application allows you to keep saving space on wiring configurations and discrete wires.
  ・Using the unique, easy locking lever, enables you to lock with an original (XG8B, XG8WL terminals) or box plug (XG4C).
  ▪ UL standard (File No.E103202) certified products are used as standard (except for XG5S type).

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	2.29 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

Loading...