Registrati
Configura
55%
  • Material
  • Shaft diameter tolerance
  • L dimension tolerance
  • Tip gradient tolerance
  • D/P (Shaft diameter) (mm)
  • Step (Step shape of the first step)
  • Shape (Tip shape)
  • A (Step shape diameter) (mm)
      [0.4-2.49/0.01mm unità]
    • C (Step type taper width) (mm)
        [0.1-4/0.1mm unità]
      • CVC (Designation of C dimension in increments of 0.01mm) (mm)
          [0.5-1/0.01mm unità]
        • F (Bearing bore length) (mm)
            [10-99.5/0.01mm unità]
          • G (Tip C chamfering width) (mm)
              [0.5-1.2/0.1mm unità]
            • L (L dimension) (mm)
                [12-100/0.01mm unità]
              • V (Tip diameter) (mm)
                  [0.5-2.49/0.01mm unità]
                • VC (V dimension alteration, smaller than V min) (mm)
                    [0.4-0.49/0.01mm unità]
                  • Tipo
                  • CAD
                  MISUMI

                  Perni di contorno / cilindrici / HSS, acciaio per utensili / l 0,01 mm / punta conica selezionabile

                  Perni di contorno / cilindrici / HSS, acciaio per utensili / l 0,01 mm / punta conica selezionabile

                  Fare clic sull'immagine per visualizzarla ingrandita

                  Codice componente:

                  Sono stati trovati. 12 candidati non definiti.
                  Quantità:

                  Disegno schematico

                  Elenco numeri di parte

                  Numero di articoli
                • 1
                  • Codice componente
                  CPA-1DC1-[12-100/0.01]-F[10-99.5/0.01]-A[0.4-0.99/0.01]-V[0.5-0.99/0.01]-C[0.1-4/0.1]-G[0.5-1.2/0.1]
                  CPA-1DC1-[12-100/0.01]-F[10-99.5/0.01]-A[0.4-0.99/0.01]-V[0.5-0.99/0.01]-CVC[0.5-1/0.01]-G[0.5-1.2/0.1]
                  CPA-1DC1-[12-100/0.01]-F[10-99.5/0.01]-A[0.4-0.99/0.01]-VC[0.4-0.49/0.01]-C[0.1-4/0.1]-G[0.5-1.2/0.1]
                  CPA-1DC1-[12-100/0.01]-F[10-99.5/0.01]-A[0.4-0.99/0.01]-VC[0.4-0.49/0.01]-CVC[0.5-1/0.01]-G[0.5-1.2/0.1]
                  CPA-1DC1.5-[12-100/0.01]-F[10-99.5/0.01]-A[0.4-1.49/0.01]-V[0.5-1.49/0.01]-C[0.1-4/0.1]-G[0.5-0.7/0.1]
                  CPA-1DC1.5-[12-100/0.01]-F[10-99.5/0.01]-A[0.4-1.49/0.01]-V[0.5-1.49/0.01]-CVC[0.5-1/0.01]-G[0.5-0.7/0.1]
                  CPA-1DC1.5-[12-100/0.01]-F[10-99.5/0.01]-A[0.4-1.49/0.01]-VC[0.4-0.49/0.01]-C[0.1-4/0.1]-G[0.5-0.7/0.1]
                  CPA-1DC1.5-[12-100/0.01]-F[10-99.5/0.01]-A[0.4-1.49/0.01]-VC[0.4-0.49/0.01]-CVC[0.5-1/0.01]-G[0.5-0.7/0.1]
                  CPA-1DC2-[12-100/0.01]-F[10-99.5/0.01]-A[0.5-1.99/0.01]-V[0.5-1.99/0.01]-C[0.1-4/0.1]-G[0.5-0.9/0.1]
                  CPA-1DC2-[12-100/0.01]-F[10-99.5/0.01]-A[0.5-1.99/0.01]-V[0.5-1.99/0.01]-CVC[0.5-1/0.01]-G[0.5-0.9/0.1]
                  CPA-1DC2.5-[12-100/0.01]-F[10-99.5/0.01]-A[0.5-2.49/0.01]-V[0.5-2.49/0.01]-C[0.1-4/0.1]-G[0.5-1.2/0.1]
                  CPA-1DC2.5-[12-100/0.01]-F[10-99.5/0.01]-A[0.5-2.49/0.01]-V[0.5-2.49/0.01]-CVC[0.5-1/0.01]-G[0.5-1.2/0.1]

                  Material

                  Shaft diameter tolerance

                  L dimension tolerance

                  Tip gradient tolerance

                  D/P (Shaft diameter)

                  (mm)

                  Step (Step shape of the first step)

                  Shape (Tip shape)

                  RE (R shape alteration・enlargement)

                  (mm)

                  A (Step shape diameter)

                  (mm)

                  C (Step type taper width)

                  (mm)

                  CVC (Designation of C dimension in increments of 0.01mm)

                  (mm)

                  F (Bearing bore length)

                  (mm)

                  G (Tip C chamfering width)

                  (mm)

                  K (Tip angle)

                  (°)

                  L (L dimension)

                  (mm)

                  Q (Tip R chamfering)

                  (mm)

                  R (Step type R)

                  (mm)

                  S (Tip tapered width)

                  (mm)

                  V (Tip diameter)

                  (mm)

                  VC (V dimension alteration, smaller than V min)

                  (mm)

                  		RoHS?Quantità minima d'ordine
                  MAS1C
                  -0.01/-0.02
                  +0.02/0
                  ±0.015
                  1
                  1D
                  C
                  -
                  0.4 - 0.99
                  0.1 - 4
                  -
                  10 - 99.5
                  0.3 - 0.4
                  -
                  12 - 100
                  -
                  -
                  -
                  0.5 - 0.99
                  -
                  10
                  1 pezzi
                  MAS1C
                  -0.01/-0.02
                  +0.02/0
                  ±0.015
                  1
                  1D
                  C
                  -
                  0.4 - 0.99
                  -
                  0.5 - 1
                  10 - 99.5
                  0.3 - 0.4
                  -
                  12 - 100
                  -
                  -
                  -
                  0.5 - 0.99
                  -
                  10
                  1 pezzi
                  MAS1C
                  -0.01/-0.02
                  +0.02/0
                  ±0.015
                  1
                  1D
                  C
                  -
                  0.4 - 0.99
                  0.1 - 4
                  -
                  10 - 99.5
                  0.3 - 0.4
                  -
                  12 - 100
                  -
                  -
                  -
                  -
                  0.4 - 0.49
                  10
                  1 pezzi
                  MAS1C
                  -0.01/-0.02
                  +0.02/0
                  ±0.015
                  1
                  1D
                  C
                  -
                  0.4 - 0.99
                  -
                  0.5 - 1
                  10 - 99.5
                  0.3 - 0.4
                  -
                  12 - 100
                  -
                  -
                  -
                  -
                  0.4 - 0.49
                  10
                  1 pezzi
                  MAS1C
                  -0.01/-0.02
                  +0.02/0
                  ±0.015
                  1.5
                  1D
                  C
                  -
                  0.4 - 1.49
                  0.1 - 4
                  -
                  10 - 99.5
                  0.5 - 0.7
                  -
                  12 - 100
                  -
                  -
                  -
                  0.5 - 1.49
                  -
                  10
                  1 pezzi
                  MAS1C
                  -0.01/-0.02
                  +0.02/0
                  ±0.015
                  1.5
                  1D
                  C
                  -
                  0.4 - 1.49
                  -
                  0.5 - 1
                  10 - 99.5
                  0.5 - 0.7
                  -
                  12 - 100
                  -
                  -
                  -
                  0.5 - 1.49
                  -
                  10
                  1 pezzi
                  MAS1C
                  -0.01/-0.02
                  +0.02/0
                  ±0.015
                  1.5
                  1D
                  C
                  -
                  0.4 - 1.49
                  0.1 - 4
                  -
                  10 - 99.5
                  0.5 - 0.7
                  -
                  12 - 100
                  -
                  -
                  -
                  -
                  0.4 - 0.49
                  10
                  1 pezzi
                  MAS1C
                  -0.01/-0.02
                  +0.02/0
                  ±0.015
                  1.5
                  1D
                  C
                  -
                  0.4 - 1.49
                  -
                  0.5 - 1
                  10 - 99.5
                  0.5 - 0.7
                  -
                  12 - 100
                  -
                  -
                  -
                  -
                  0.4 - 0.49
                  10
                  1 pezzi
                  MAS1C
                  -0.01/-0.02
                  +0.02/0
                  ±0.015
                  2
                  1D
                  C
                  -
                  0.5 - 1.99
                  0.1 - 4
                  -
                  10 - 99.5
                  0.5 - 0.9
                  -
                  12 - 100
                  -
                  -
                  -
                  0.5 - 1.99
                  -
                  10
                  1 pezzi
                  MAS1C
                  -0.01/-0.02
                  +0.02/0
                  ±0.015
                  2
                  1D
                  C
                  -
                  0.5 - 1.99
                  -
                  0.5 - 1
                  10 - 99.5
                  0.5 - 0.9
                  -
                  12 - 100
                  -
                  -
                  -
                  0.5 - 1.99
                  -
                  10
                  1 pezzi
                  MAS1C
                  -0.01/-0.02
                  +0.02/0
                  ±0.015
                  2.5
                  1D
                  C
                  -
                  0.5 - 2.49
                  0.1 - 4
                  -
                  10 - 99.5
                  0.5 - 1.2
                  -
                  12 - 100
                  -
                  -
                  -
                  0.5 - 2.49
                  -
                  10
                  1 pezzi
                  MAS1C
                  -0.01/-0.02
                  +0.02/0
                  ±0.015
                  2.5
                  1D
                  C
                  -
                  0.5 - 2.49
                  -
                  0.5 - 1
                  10 - 99.5
                  0.5 - 1.2
                  -
                  12 - 100
                  -
                  -
                  -
                  0.5 - 2.49
                  -
                  10
                  1 pezzi
                  Prezzo unitario (IVA esclusa)(Prezzo unitario IVA inclusa)
                  Giorni spedizione standard
                  -
                  (
                  -
                  )
                  Preventivo
                  -
                  (
                  -
                  )
                  Preventivo
                  -
                  (
                  -
                  )
                  Preventivo
                  -
                  (
                  -
                  )
                  Preventivo
                  -
                  (
                  -
                  )
                  Preventivo
                  -
                  (
                  -
                  )
                  Preventivo
                  -
                  (
                  -
                  )
                  Preventivo
                  -
                  (
                  -
                  )
                  Preventivo
                  -
                  (
                  -
                  )
                  Preventivo
                  -
                  (
                  -
                  )
                  Preventivo
                  -
                  (
                  -
                  )
                  Preventivo
                  -
                  (
                  -
                  )
                  Preventivo
                • 1

                  • Ulteriori informazioni