Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.02 ～ 3	0.2 ～ 25	Resina[◎]	Carburo	38 ～ 50	Punta a gambo dritto	N/A	Senza rivestimento	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.3 ～ 6	4 ～ 40	Resina[◎]	Carburo	30 ～ 80	A gambo dritto	Disponibile	TiAlN	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.1 ～ 3	1.2 ～ 25	Resina[◎]	Carburo	38 ～ 50	Punta a gambo dritto	N/A	Senza rivestimento	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
1 ～ 6	16 ～ 50	Resina[◎]	Carburo	50 ～ 102	Punta a gambo dritto	N/A	Senza rivestimento	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.3 ～ 13	15 ～ 120	Resina[◎]	Carburo	75 ～ 250	A gambo dritto	N/A	Senza rivestimento	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.3 ～ 13	8 ～ 70	Resina[◎]	Carburo	40 ～ 149	A gambo dritto	N/A	Senza rivestimento	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.035 ～ 1.995	0.4 ～ 22	Resina[◎]	Carburo	38 ～ 50	Punta a gambo dritto	N/A	Senza rivestimento	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.1 ～ 2.99	0.6 ～ 12	Resina[○]	Carburo	38	Punta a gambo dritto	Disponibile	Per acciai generici	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.03 ～ 3	0.6 ～ 40	Resina[○]	Carburo	38 ～ 65	Punta a gambo dritto	Disponibile	Per acciai generici	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.03 ～ 3	0.3 ～ 25	Resina[○]	Carburo	38 ～ 50	Punta a gambo dritto	Disponibile	Per acciai generici	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.04 ～ 1.5	0.4 ～ 10	Resina[◎]	Carburo	38	Punta a gambo dritto	N/A	Senza rivestimento	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.1 ～ 3	0.6 ～ 12	Resina[◎]	Carburo	38	Punta a gambo dritto	N/A	Senza rivestimento	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.03 ～ 3	0.6 ～ 40	Resina[◎]	Carburo	38 ～ 65	Punta a gambo dritto	N/A	Senza rivestimento	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.3 ～ 13	10 ～ 90	Resina[◎]	Carburo	60 ～ 200	A gambo dritto	N/A	Senza rivestimento	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.05 ～ 0.99	0.5 ～ 9.5	Resina[◎]	Carburo	30	Punta a gambo dritto	N/A	Senza rivestimento	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.3 ～ 13	4 ～ 50	Resina[◎]	Carburo	30 ～ 100	A gambo dritto	N/A	Senza rivestimento	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.04 ～ 0.99	0.6 ～ 11	Resina[○]	Carburo	38	Punta a gambo dritto	N/A	Senza rivestimento	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.04 ～ 0.99	0.6 ～ 11	Resina[○]	Carburo	38	Punta a gambo dritto	Disponibile	Per acciai generici	N/A

Registrati

Categoria

Configura

Cancella tutto

Stock
Indicare solo prodotti a magazzino

Hole diameter (drill diameter) D (mm)

0.02
0.03
0.035
0.04
0.045
0.05
0.055
0.06
0.065
0.07
0.075
0.08
0.085
0.09
0.095
0.1
0.105
0.11
0.115
0.12
0.125
0.13
0.135
0.14
0.145
0.15
0.155
0.16
0.165
0.17
0.175
0.18
0.185
0.19
0.195
0.2
0.205
0.21
0.215
0.22
0.225
0.23
0.235
0.24
0.245
0.25
0.255
0.26
0.265
0.27
0.275
0.28
0.285
0.29
0.295
0.3
0.305
0.31
0.315
0.32
0.325
0.33
0.335
0.34
0.345
0.35
0.355
0.36
0.365
0.37
0.375
0.38
0.385
0.39
0.395
0.4
0.405
0.41
0.415
0.42
0.425
0.43
0.435
0.44
0.445
0.45
0.455
0.46
0.465
0.47
0.475
0.48
0.485
0.49
0.495
0.5
0.505
0.51
0.515
0.52
0.525
0.53
0.535
0.54
0.545
0.55
0.555
0.56
0.565
0.57
0.575
0.58
0.585
0.59
0.595
0.6
0.605
0.61
0.615
0.62
0.625
0.63
0.635
0.64
0.645
0.65
0.655
0.66
0.665
0.67
0.675
0.68
0.685
0.69
0.695
0.7
0.705
0.71
0.715
0.72
0.725
0.73
0.735
0.74
0.745
0.75
0.755
0.76
0.765
0.77
0.775
0.78
0.785
0.79
0.795
0.8
0.805
0.81
0.815
0.82
0.825
0.83
0.835
0.84
0.845
0.85
0.855
0.86
0.865
0.87
0.875
0.88
0.885
0.89
0.895
0.9
0.905
0.91
0.915
0.92
0.925
0.93
0.935
0.94
0.945
0.95
0.955
0.96
0.965
0.97
0.975
0.98
0.985
0.99
0.995
1
1.005
1.01
1.015
1.02
1.025
1.03
1.035
1.04
1.045
1.05
1.055
1.06
1.065
1.07
1.075
1.08
1.085
1.09
1.095
1.1
1.105
1.11
1.115
1.12
1.125
1.13
1.135
1.14
1.145
1.15
1.155
1.16
1.165
1.17
1.175
1.18
1.185
1.19
1.195
1.2
1.205
1.21
1.215
1.22
1.225
1.23
1.235
1.24
1.245
1.25
1.255
1.26
1.265
1.27
1.275
1.28
1.285
1.29
1.295
1.3
1.305
1.31
1.315
1.32
1.325
1.33
1.335
1.34
1.345
1.35
1.355
1.36
1.365
1.37
1.375
1.38
1.385
1.39
1.395
1.4
1.405
1.41
1.415
1.42
1.425
1.43
1.435
1.44
1.445
1.45
1.455
1.46
1.465
1.47
1.475
1.48
1.485
1.49
1.495
1.5
1.505
1.51
1.515
1.52
1.525
1.53
1.535
1.54
1.545
1.55
1.555
1.56
1.565
1.57
1.575
1.58
1.585
1.59
1.595
1.6
1.605
1.61
1.615
1.62
1.625
1.63
1.635
1.64
1.645
1.65
1.655
1.66
1.665
1.67
1.675
1.68
1.685
1.69
1.695
1.7
1.705
1.71
1.715
1.72
1.725
1.73
1.735
1.74
1.745
1.75
1.755
1.76
1.765
1.77
1.775
1.78
1.785
1.79
1.795
1.8
1.805
1.81
1.815
1.82
1.825
1.83
1.835
1.84
1.845
1.85
1.855
1.86
1.865
1.87
1.875
1.88
1.885
1.89
1.895
1.9
1.905
1.91
1.915
1.92
1.925
1.93
1.935
1.94
1.945
1.95
1.955
1.96
1.965
1.97
1.975
1.98
1.985
1.99
1.995
2
2.01
2.02
2.03
2.04
2.05
2.06
2.07
2.08
2.09
2.1
2.11
2.12
2.13
2.14
2.15
2.16
2.17
2.18
2.19
2.2
2.21
2.22
2.23
2.24
2.25
2.26
2.27
2.28
2.29
2.3
2.31
2.32
2.33
2.34
2.35
2.36
2.37
2.38
2.39
2.4
2.41
2.42
2.43
2.44
2.45
2.46
2.47
2.48
2.49
2.5
2.51
2.52
2.53
2.54
2.55
2.56
2.57
2.58
2.59
2.6
2.61
2.62
2.63
2.64
2.65
2.66
2.67
2.68
2.69
2.7
2.71
2.72
2.73
2.74
2.75
2.76
2.77
2.78
2.79
2.8
2.81
2.82
2.83
2.84
2.85
2.86
2.87
2.88
2.89
2.9
2.91
2.92
2.93
2.94
2.95
2.96
2.97
2.98
2.99
3
3.01
3.02
3.03
3.05
3.06
3.07
3.08
3.09
3.1
3.11
3.12
3.13
3.14
3.15
3.16
3.17
3.18
3.19
3.2
3.21
3.22
3.23
3.24
3.25
3.26
3.27
3.28
3.29
3.3
3.31
3.32
3.33
3.34
3.35
3.36
3.37
3.38
3.39
3.4
3.41
3.42
3.43
3.44
3.45
3.46
3.47
3.48
3.49
3.5
3.51
3.52
3.53
3.54
3.55
3.56
3.57
3.58
3.59
3.6
3.61
3.62
3.63
3.64
3.65
3.66
3.67
3.68
3.69
3.7
3.71
3.72
3.73
3.74
3.75
3.76
3.77
3.78
3.79
3.8
3.81
3.82
3.83
3.84
3.85
3.86
3.87
3.88
3.89
3.9
3.91
3.92
3.93
3.94
3.95
3.96
3.97
3.98
3.99
4
4.01
4.02
4.03
4.04
4.05
4.06
4.07
4.08
4.09
4.1
4.11
4.12
4.13
4.14
4.15
4.16
4.17
4.18
4.19
4.2
4.21
4.22
4.23
4.24
4.25
4.26
4.27
4.28
4.29
4.3
4.31
4.32
4.33
4.34
4.35
4.36
4.37
4.38
4.39
4.4
4.41
4.42
4.43
4.44
4.45
4.46
4.47
4.48
4.49
4.5
4.51
4.52
4.53
4.54
4.55
4.56
4.57
4.58
4.59
4.6
4.61
4.62
4.63
4.64
4.65
4.66
4.67
4.68
4.69
4.7
4.71
4.72
4.73
4.74
4.75
4.76
4.77
4.78
4.79
4.8
4.81
4.82
4.83
4.84
4.85
4.86
4.87
4.88
4.89
4.9
4.91
4.92
4.93
4.94
4.95
4.96
4.97
4.98
4.99
5
5.01
5.02
5.03
5.04
5.05
5.06
5.07
5.08
5.09
5.1
5.11
5.12
5.13
5.14
5.15
5.16
5.17
5.18
5.19
5.2
5.21
5.22
5.23
5.24
5.25
5.26
5.27
5.28
5.29
5.3
5.31
5.32
5.33
5.34
5.35
5.36
5.37
5.38
5.39
5.4
5.41
5.42
5.43
5.44
5.45
5.46
5.47
5.48
5.49
5.5
5.51
5.52
5.53
5.54
5.55
5.56
5.57
5.58
5.59
5.6
5.61
5.62
5.63
5.64
5.65
5.66
5.67
5.68
5.69
5.7
5.71
5.72
5.73
5.74
5.75
5.76
5.77
5.78
5.79
5.8
5.81
5.82
5.83
5.84
5.85
5.86
5.87
5.88
5.89
5.9
5.91
5.92
5.93
5.94
5.95
5.96
5.97
5.98
5.99
6
6.01
6.02
6.03
6.04
6.05
6.06
6.07
6.08
6.09
6.1
6.2
6.25
6.3
6.35
6.4
6.5
6.55
6.6
6.65
6.7
6.75
6.8
6.85
6.9
6.95
7
7.01
7.02
7.03
7.04
7.05
7.06
7.07
7.08
7.09
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8
8.01
8.02
8.03
8.04
8.05
8.06
8.07
8.08
8.09
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9
9.01
9.02
9.03
9.04
9.05
9.06
9.07
9.08
9.09
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10
10.01
10.02
10.03
10.04
10.05
10.06
10.07
10.08
10.09
10.1
10.2
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11
11.01
11.02
11.03
11.04
11.05
11.06
11.07
11.08
11.09
11.1
11.2
11.3
11.4
11.5
11.6
11.7
11.8
11.9
12
12.01
12.02
12.03
12.04
12.05
12.06
12.07
12.08
12.09
12.1
12.2
12.3
12.4
12.5
12.6
12.7
12.8
12.9
13

Groove Length L (mm)

work material

Resina

Tool Material Type

Carburo

Overall Length L (mm)

Shank Type

Punta a gambo dritto
A gambo dritto

Coating Y/N

Disponibile
N/A

Coating Type

TiAlN
Per acciai generici
Senza rivestimento

With/without Oil Hole

Produttore

ATOM (18)

ATOM Punte al carburo（work material：Resina）

Frese e punte a gambo dritto (al carburo) (18)

18 articoli

* Informazioni su tempi di consegna, spese di trasporto e prezzi

Elenco

Foto

Specifiche di confronto

Numero di articoli da visualizzare:Ordina per:

Data di spedizione prevista:

SCONTATO
Sconto volumi elevati
ATOM
Micropunta standard
A drill for precision multiporous machining. (Min. diameter φ0.02), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.02 ～ 3 0.2 ～ 25 Resina[◎] Carburo 38 ～ 50 Punta a gambo dritto N/A Senza rivestimento N/A
Prezzo (IVA esclusa) da:
28.41 €
Prezzo speciale
Spedizione prevista in:
Articolo a stock: 1 giorno lavorativo
Alcuni articoli possono essere spediti lo stesso giorno
Configura ora
SCONTATO
Sconto volumi elevati
ATOM
Punta dura standard con rivestimento
ADS standard type with a TiAlN coating achieves a long life and consistent machining. It is also possible to drill hardened steel of up to 50 HRC, for which machining was difficult with standard non-coated products.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.3 ～ 6 4 ～ 40 Resina[◎] Carburo 30 ～ 80 A gambo dritto Disponibile TiAlN N/A
Prezzo (IVA esclusa) da:
22.38 €
Prezzo speciale
Spedizione prevista in:
Articolo a stock: 1 giorno lavorativo
Alcuni articoli possono essere spediti lo stesso giorno
Configura ora
ATOM
Punta Sweep Cut, gambo da 3 mm
Drastically reduces the burrs of through holes. Achieves high hole position and hole diameter precision by suppressing bit runout and deflection when biting. Suppresses hole bending.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.1 ～ 3 1.2 ～ 25 Resina[◎] Carburo 38 ～ 50 Punta a gambo dritto N/A Senza rivestimento N/A
Prezzo (IVA esclusa) da:
67.02 €
Prezzo inclusa IVA:
79.75 €
Spedizione prevista in:
6 giorni lavorativi
Configura ora
ATOM
Punta Sweep Cut, gambo dritto
Drastically reduces the burrs of through holes. Achieves high hole position and hole diameter precision by suppressing bit runout and deflection when biting. Suppresses hole bending.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
1 ～ 6 16 ～ 50 Resina[◎] Carburo 50 ～ 102 Punta a gambo dritto N/A Senza rivestimento N/A
Prezzo (IVA esclusa) da:
47.90 €
Prezzo inclusa IVA:
57.00 €
Spedizione prevista in:
6 giorni lavorativi
Configura ora
Sconto volumi elevati
ATOM
Punta super lunga
ADS standard straight shank drill extra-long type.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.3 ～ 13 15 ～ 120 Resina[◎] Carburo 75 ～ 250 A gambo dritto N/A Senza rivestimento N/A
Prezzo (IVA esclusa) da:
29.54 €
Prezzo inclusa IVA:
35.15 €
Spedizione prevista in:
6 giorni lavorativi
Configura ora
SCONTATO
Sconto volumi elevati
ATOM
Punta dura semi lunga
A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.3 ～ 13 8 ～ 70 Resina[◎] Carburo 40 ～ 149 A gambo dritto N/A Senza rivestimento N/A
Prezzo (IVA esclusa) da:
19.59 €
Prezzo speciale
Spedizione prevista in:
Articolo a stock: 1 giorno lavorativo
Alcuni articoli possono essere spediti lo stesso giorno
Configura ora
SCONTATO
Sconto volumi elevati
ATOM
Micropunta Hi-Spec
The intermediate size of the drill diameter 0.01 mm increment size is standardized. High-spec and high-precision drill, keeping runout accuracy and lip height difference that affect hole accuracy within 2 microns.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.035 ～ 1.995 0.4 ～ 22 Resina[◎] Carburo 38 ～ 50 Punta a gambo dritto N/A Senza rivestimento N/A
Prezzo (IVA esclusa) da:
40.91 €
Prezzo speciale
Spedizione prevista in:
Articolo a stock: 1 giorno lavorativo
Alcuni articoli possono essere spediti lo stesso giorno
Configura ora
SCONTATO
Sconto volumi elevati
ATOM
Micropunta "NEO PRO", tagliente corto
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.1 ～ 2.99 0.6 ～ 12 Resina[○] Carburo 38 Punta a gambo dritto Disponibile Per acciai generici N/A
Prezzo (IVA esclusa) da:
34.33 €
Prezzo speciale
Spedizione prevista in:
Articolo a stock: 1 giorno lavorativo
Alcuni articoli possono essere spediti lo stesso giorno
Configura ora
SCONTATO
Sconto volumi elevati
ATOM
Micropunta "NEO PRO", tagliente lungo
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.03 ～ 3 0.6 ～ 40 Resina[○] Carburo 38 ～ 65 Punta a gambo dritto Disponibile Per acciai generici N/A
Prezzo (IVA esclusa) da:
46.50 €
Prezzo speciale
Spedizione prevista in:
Articolo a stock: 1 giorno lavorativo
Alcuni articoli possono essere spediti lo stesso giorno
Configura ora
SCONTATO
Sconto volumi elevati
ATOM
Micropunta "NEO PRO", lunghezza tagliente standard
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.03 ～ 3 0.3 ～ 25 Resina[○] Carburo 38 ～ 50 Punta a gambo dritto Disponibile Per acciai generici N/A
Prezzo (IVA esclusa) da:
34.30 €
Prezzo speciale
Spedizione prevista in:
Articolo a stock: 1 giorno lavorativo
Alcuni articoli possono essere spediti lo stesso giorno
Configura ora
SCONTATO
Sconto volumi elevati
ATOM
Micropunta con gambo da 3.175 mm
A drill for precision multiporous machining. Supports a wide range of applications, from general steel to nonferrous metals and resins.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.04 ～ 1.5 0.4 ～ 10 Resina[◎] Carburo 38 Punta a gambo dritto N/A Senza rivestimento N/A
Prezzo (IVA esclusa) da:
28.41 €
Prezzo speciale
Spedizione prevista in:
Articolo a stock: 1 giorno lavorativo
Alcuni articoli possono essere spediti lo stesso giorno
Configura ora
ATOM
Micropunta corta
A drill for precision multiporous machining. Supports a wide range of applications, from general steel to nonferrous metals and resins.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.1 ～ 3 0.6 ～ 12 Resina[◎] Carburo 38 Punta a gambo dritto N/A Senza rivestimento N/A
Prezzo (IVA esclusa) da:
28.74 €
Prezzo inclusa IVA:
34.20 €
Spedizione prevista in:
6 giorni lavorativi
Configura ora
SCONTATO
Sconto volumi elevati
ATOM
Micropunta lunga
Small diameter, deep hole machining drill. (Min. diameter φ0.03), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.03 ～ 3 0.6 ～ 40 Resina[◎] Carburo 38 ～ 65 Punta a gambo dritto N/A Senza rivestimento N/A
Prezzo (IVA esclusa) da:
38.88 €
Prezzo speciale
Spedizione prevista in:
Articolo a stock: 1 giorno lavorativo
Alcuni articoli possono essere spediti lo stesso giorno
Configura ora
Sconto volumi elevati
ATOM
Punta lunga
ADS standard straight shank drill long type.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.3 ～ 13 10 ～ 90 Resina[◎] Carburo 60 ～ 200 A gambo dritto N/A Senza rivestimento N/A
Prezzo (IVA esclusa) da:
26.55 €
Prezzo inclusa IVA:
31.59 €
Spedizione prevista in:
6 giorni lavorativi
Configura ora
Sconto volumi elevati
ATOM
Tagliente a spirale per diametri piccoli, gambo 1 mm
A 1 mm shank drill for precision multiporous machining.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.05 ～ 0.99 0.5 ～ 9.5 Resina[◎] Carburo 30 Punta a gambo dritto N/A Senza rivestimento N/A
Prezzo (IVA esclusa) da:
18.99 €
Prezzo inclusa IVA:
22.60 €
Spedizione prevista in:
6 giorni lavorativi
Configura ora
SCONTATO
Sconto volumi elevati
ATOM
Punta dura standard
A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.3 ～ 13 4 ～ 50 Resina[◎] Carburo 30 ～ 100 A gambo dritto N/A Senza rivestimento N/A
Prezzo (IVA esclusa) da:
16.75 €
Prezzo speciale
Spedizione prevista in:
Articolo a stock: 1 giorno lavorativo
Alcuni articoli possono essere spediti lo stesso giorno
Configura ora
ATOM
Micropunta, lunghezza media
A drill for precision multiporous machining. (Min. diameter φ0.04), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.04 ～ 0.99 0.6 ～ 11 Resina[○] Carburo 38 Punta a gambo dritto N/A Senza rivestimento N/A
Prezzo (IVA esclusa) da:
33.33 €
Prezzo inclusa IVA:
39.66 €
Spedizione prevista in:
6 giorni lavorativi
Configura ora
SCONTATO
ATOM
Micropunta "NEO PRO", taglienti semi lunghi
A series that achieves stable long life developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Leggi altro
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.04 ～ 0.99 0.6 ～ 11 Resina[○] Carburo 38 Punta a gambo dritto Disponibile Per acciai generici N/A
Prezzo (IVA esclusa) da:
41.11 €
Prezzo speciale
Spedizione prevista in:
Articolo a stock: 1 giorno lavorativo
Alcuni articoli possono essere spediti lo stesso giorno
Configura ora

Categorie correlate a Punte al carburo

Punte al carburo

Frese e punte a gambo dritto (al carburo)