Dual-Rod Cylinder, Basic Type CXS Series with guide function that is suitable for pick and place applications, etc. [Features] · Ball bushing bearings and slide bearings are standard for all series. · Can be mounted from 3 directions. · Workpieces can be mounted on 3 surfaces. · Air cushion only minimally adds to full length dimension.
[Caratteristiche] · Ammortizzazione uniforme da velocità elevate (3.000 mm/s) con carichi leggeri a velocità medio-basse con carichi medi. · Capacità di assorbimento di energia da 10 a 20 volte quella di un cilindro per uso generico.
A square tube type air cylinder that enables mounting of small auto switches on 4 surfaces. [Features] · Fastener on auto switch mounting groove to prevent contaminant from accumulating (option). · Part numbers are set for products with rod-end brackets and pivot brackets. *Rod-end bracket and pivot bracket are shipped together with the product. · Not necessary to order a bracket for the applicable cylinder separately. · Various mounting bracket options. · Suitable mounting brackets can be selected for the installation conditions. · Improved mounting freedom.
An air cylinder suitable for all driving ranges, from low pressure, low speed, uniform speed and low friction to high pressure, high speed and high-speed response (high frequency). [Features] · Covers a range of driving speeds and output controls not possible with standard cylinders thanks to its metal seal structure with minimal sliding resistance. · Minimal sliding resistance allows low-pressure actuation at 0.005 MPa. · Low- and uniform-speed actuation. Smooth, uniform-speed actuation ranges as low as 0.3 mm/s. · Low sliding resistance allows output control in approx. 0.05 N increments. (Based on cylinder piston area × pressure accuracy) · No increased sliding resistance after not operating for a long period of time. · Long lifespan: Long service life of 10,000 km or 100 million full cycles. · Lateral load resistance increased by built-in ball bushing.