• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni da taglio / testa cilindrica / perno di forzatura / foro per perno / a gradini / dicoat

Punzoni da taglio / testa cilindrica / perno di forzatura / foro per perno / a gradini / dicoat

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • FLANGE
  • SKD11
  • DICOAT

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Avanti >>
Codice componente
T-SJGL-C10-[70-100/10]-P[3-9.97/0.01]-W[3-9.97/0.01]
T-SJGL-C10-LC[53-69.9/0.1]-P[3-9.97/0.01]-W[3-9.97/0.01]
T-SJGL-C10-LC[70-90/10]-P[3-9.97/0.01]-W[3-9.97/0.01]
T-SJGL-C10-LC[70.1-79.9/0.1]-P[3-9.97/0.01]-W[3-9.97/0.01]
T-SJGL-C10-LC[80.1-89.9/0.1]-P[3-9.97/0.01]-W[3-9.97/0.01]
T-SJGL-C10-LC[90.1-99.9/0.1]-P[3-9.97/0.01]-W[3-9.97/0.01]
T-SJGL-C13-[70-100/10]-P[6-12.97/0.01]-W[6-12.97/0.01]
T-SJGL-C13-[70-100/10]-P[6-12.97/0.01]-WC[5-5.99/0.01]
T-SJGL-C13-[70-100/10]-PC[5-5.99/0.01]-W[6-12.97/0.01]
T-SJGL-C13-[70-100/10]-PC[5-5.99/0.01]-WC[5-5.99/0.01]
T-SJGL-C13-LC[53-69.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01]
T-SJGL-C13-LC[53-69.9/0.1]-P[6-12.97/0.01]-WC[5-5.99/0.01]
T-SJGL-C13-LC[53-69.9/0.1]-PC[5-5.99/0.01]-W[6-12.97/0.01]
T-SJGL-C13-LC[53-69.9/0.1]-PC[5-5.99/0.01]-WC[5-5.99/0.01]
T-SJGL-C13-LC[70-90/10]-P[6-12.97/0.01]-W[6-12.97/0.01]
T-SJGL-C13-LC[70-90/10]-P[6-12.97/0.01]-WC[5-5.99/0.01]
T-SJGL-C13-LC[70-90/10]-PC[5-5.99/0.01]-W[6-12.97/0.01]
T-SJGL-C13-LC[70-90/10]-PC[5-5.99/0.01]-WC[5-5.99/0.01]
T-SJGL-C13-LC[70.1-79.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01]
T-SJGL-C13-LC[70.1-79.9/0.1]-P[6-12.97/0.01]-WC[5-5.99/0.01]
T-SJGL-C13-LC[70.1-79.9/0.1]-PC[5-5.99/0.01]-W[6-12.97/0.01]
T-SJGL-C13-LC[70.1-79.9/0.1]-PC[5-5.99/0.01]-WC[5-5.99/0.01]
T-SJGL-C13-LC[80.1-89.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01]
T-SJGL-C13-LC[80.1-89.9/0.1]-P[6-12.97/0.01]-WC[5-5.99/0.01]
T-SJGL-C13-LC[80.1-89.9/0.1]-PC[5-5.99/0.01]-W[6-12.97/0.01]
T-SJGL-C13-LC[80.1-89.9/0.1]-PC[5-5.99/0.01]-WC[5-5.99/0.01]
T-SJGL-C13-LC[90.1-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01]
T-SJGL-C13-LC[90.1-99.9/0.1]-P[6-12.97/0.01]-WC[5-5.99/0.01]
T-SJGL-C13-LC[90.1-99.9/0.1]-PC[5-5.99/0.01]-W[6-12.97/0.01]
T-SJGL-C13-LC[90.1-99.9/0.1]-PC[5-5.99/0.01]-WC[5-5.99/0.01]
T-SJGL-C16-[70-100/10]-P[6-15.97/0.01]-W[6-15.97/0.01]
T-SJGL-C16-[70-100/10]-P[6-15.97/0.01]-WC[5-5.99/0.01]
T-SJGL-C16-[70-100/10]-PC[5-5.99/0.01]-W[6-15.97/0.01]
T-SJGL-C16-[70-100/10]-PC[5-5.99/0.01]-WC[5-5.99/0.01]
T-SJGL-C16-LC[47-69.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01]
T-SJGL-C16-LC[47-69.9/0.1]-P[6-15.97/0.01]-WC[5-5.99/0.01]
T-SJGL-C16-LC[47-69.9/0.1]-PC[5-5.99/0.01]-W[6-15.97/0.01]
T-SJGL-C16-LC[47-69.9/0.1]-PC[5-5.99/0.01]-WC[5-5.99/0.01]
T-SJGL-C16-LC[70-90/10]-P[6-15.97/0.01]-W[6-15.97/0.01]
T-SJGL-C16-LC[70-90/10]-P[6-15.97/0.01]-WC[5-5.99/0.01]
T-SJGL-C16-LC[70-90/10]-PC[5-5.99/0.01]-W[6-15.97/0.01]
T-SJGL-C16-LC[70-90/10]-PC[5-5.99/0.01]-WC[5-5.99/0.01]
T-SJGL-C16-LC[70.1-79.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01]
T-SJGL-C16-LC[70.1-79.9/0.1]-P[6-15.97/0.01]-WC[5-5.99/0.01]
T-SJGL-C16-LC[70.1-79.9/0.1]-PC[5-5.99/0.01]-W[6-15.97/0.01]
T-SJGL-C16-LC[70.1-79.9/0.1]-PC[5-5.99/0.01]-WC[5-5.99/0.01]
T-SJGL-C16-LC[80.1-89.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01]
T-SJGL-C16-LC[80.1-89.9/0.1]-P[6-15.97/0.01]-WC[5-5.99/0.01]
T-SJGL-C16-LC[80.1-89.9/0.1]-PC[5-5.99/0.01]-W[6-15.97/0.01]
T-SJGL-C16-LC[80.1-89.9/0.1]-PC[5-5.99/0.01]-WC[5-5.99/0.01]
T-SJGL-C16-LC[90.1-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01]
T-SJGL-C16-LC[90.1-99.9/0.1]-P[6-15.97/0.01]-WC[5-5.99/0.01]
T-SJGL-C16-LC[90.1-99.9/0.1]-PC[5-5.99/0.01]-W[6-15.97/0.01]
T-SJGL-C16-LC[90.1-99.9/0.1]-PC[5-5.99/0.01]-WC[5-5.99/0.01]
T-SJGL-C20-[70-100/10]-P[6-19.97/0.01]-W[6-19.97/0.01]
T-SJGL-C20-[70-100/10]-P[6-19.97/0.01]-WC[5-5.99/0.01]
T-SJGL-C20-[70-100/10]-PC[5-5.99/0.01]-W[6-19.97/0.01]
T-SJGL-C20-[70-100/10]-PC[5-5.99/0.01]-WC[5-5.99/0.01]
T-SJGL-C20-LC[47-69.9/0.1]-P[6-19.97/0.01]-W[6-19.97/0.01]
T-SJGL-C20-LC[47-69.9/0.1]-P[6-19.97/0.01]-WC[5-5.99/0.01]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSJector Tip shape B (Tip length) D (Shank diameter)
(mm) 		P (Tip dimension)
(mm) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		R (Tip corner R)
(mm) 		W (Tip dimension)
(mm)
1 Preventivo 10Standard typeGL103 ～ 9.9770 ～ 100--3 ～ 9.97
1 Preventivo 10Standard typeGL103 ～ 9.97-53 ～ 69.9-3 ～ 9.97
1 Preventivo 10Standard typeGL103 ～ 9.97-70 ～ 90-3 ～ 9.97
1 Preventivo 10Standard typeGL103 ～ 9.97-70.1 ～ 79.9-3 ～ 9.97
1 Preventivo 10Standard typeGL103 ～ 9.97-80.1 ～ 89.9-3 ～ 9.97
1 Preventivo 10Standard typeGL103 ～ 9.97-90.1 ～ 99.9-3 ～ 9.97
1 Preventivo 10Standard typeGL136 ～ 12.9770 ～ 100--6 ～ 12.97
1 Preventivo 10Standard typeGL136 ～ 12.9770 ～ 100---
1 Preventivo 10Standard typeGL13-70 ～ 100--6 ～ 12.97
1 Preventivo 10Standard typeGL13-70 ～ 100---
1 Preventivo 10Standard typeGL136 ～ 12.97-53 ～ 69.9-6 ～ 12.97
1 Preventivo 10Standard typeGL136 ～ 12.97-53 ～ 69.9--
1 Preventivo 10Standard typeGL13--53 ～ 69.9-6 ～ 12.97
1 Preventivo 10Standard typeGL13--53 ～ 69.9--
1 Preventivo 10Standard typeGL136 ～ 12.97-70 ～ 90-6 ～ 12.97
1 Preventivo 10Standard typeGL136 ～ 12.97-70 ～ 90--
1 Preventivo 10Standard typeGL13--70 ～ 90-6 ～ 12.97
1 Preventivo 10Standard typeGL13--70 ～ 90--
1 Preventivo 10Standard typeGL136 ～ 12.97-70.1 ～ 79.9-6 ～ 12.97
1 Preventivo 10Standard typeGL136 ～ 12.97-70.1 ～ 79.9--
1 Preventivo 10Standard typeGL13--70.1 ～ 79.9-6 ～ 12.97
1 Preventivo 10Standard typeGL13--70.1 ～ 79.9--
1 Preventivo 10Standard typeGL136 ～ 12.97-80.1 ～ 89.9-6 ～ 12.97
1 Preventivo 10Standard typeGL136 ～ 12.97-80.1 ～ 89.9--
1 Preventivo 10Standard typeGL13--80.1 ～ 89.9-6 ～ 12.97
1 Preventivo 10Standard typeGL13--80.1 ～ 89.9--
1 Preventivo 10Standard typeGL136 ～ 12.97-90.1 ～ 99.9-6 ～ 12.97
1 Preventivo 10Standard typeGL136 ～ 12.97-90.1 ～ 99.9--
1 Preventivo 10Standard typeGL13--90.1 ～ 99.9-6 ～ 12.97
1 Preventivo 10Standard typeGL13--90.1 ～ 99.9--
1 Preventivo 10Standard typeGL166 ～ 15.9770 ～ 100--6 ～ 15.97
1 Preventivo 10Standard typeGL166 ～ 15.9770 ～ 100---
1 Preventivo 10Standard typeGL16-70 ～ 100--6 ～ 15.97
1 Preventivo 10Standard typeGL16-70 ～ 100---
1 Preventivo 10Standard typeGL166 ～ 15.97-47 ～ 69.9-6 ～ 15.97
1 Preventivo 10Standard typeGL166 ～ 15.97-47 ～ 69.9--
1 Preventivo 10Standard typeGL16--47 ～ 69.9-6 ～ 15.97
1 Preventivo 10Standard typeGL16--47 ～ 69.9--
1 Preventivo 10Standard typeGL166 ～ 15.97-70 ～ 90-6 ～ 15.97
1 Preventivo 10Standard typeGL166 ～ 15.97-70 ～ 90--
1 Preventivo 10Standard typeGL16--70 ～ 90-6 ～ 15.97
1 Preventivo 10Standard typeGL16--70 ～ 90--
1 Preventivo 10Standard typeGL166 ～ 15.97-70.1 ～ 79.9-6 ～ 15.97
1 Preventivo 10Standard typeGL166 ～ 15.97-70.1 ～ 79.9--
1 Preventivo 10Standard typeGL16--70.1 ～ 79.9-6 ～ 15.97
1 Preventivo 10Standard typeGL16--70.1 ～ 79.9--
1 Preventivo 10Standard typeGL166 ～ 15.97-80.1 ～ 89.9-6 ～ 15.97
1 Preventivo 10Standard typeGL166 ～ 15.97-80.1 ～ 89.9--
1 Preventivo 10Standard typeGL16--80.1 ～ 89.9-6 ～ 15.97
1 Preventivo 10Standard typeGL16--80.1 ～ 89.9--
1 Preventivo 10Standard typeGL166 ～ 15.97-90.1 ～ 99.9-6 ～ 15.97
1 Preventivo 10Standard typeGL166 ～ 15.97-90.1 ～ 99.9--
1 Preventivo 10Standard typeGL16--90.1 ～ 99.9-6 ～ 15.97
1 Preventivo 10Standard typeGL16--90.1 ～ 99.9--
1 Preventivo 10Standard typeGL206 ～ 19.9770 ～ 100--6 ～ 19.97
1 Preventivo 10Standard typeGL206 ～ 19.9770 ～ 100---
1 Preventivo 10Standard typeGL20-70 ～ 100--6 ～ 19.97
1 Preventivo 10Standard typeGL20-70 ～ 100---
1 Preventivo 10Standard typeGL206 ～ 19.97-47 ～ 69.9-6 ～ 19.97
1 Preventivo 10Standard typeGL206 ～ 19.97-47 ～ 69.9--

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Avanti >>
 

Informazioni di base

Heavy-load punches No Shank type Single-stepped Material SKD11 Equivalent
Surface treatment Dicoat Shank (mounting part) shape With locating dowel hole Shank diameter D tolerance m5
T (Head thickness/plate thickness)(mm) 5

Configura

Ripristina

714Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Jector

    • Standard type
    • Spring reinforced type

    Ripristina

  • B (Tip length)

    • L
    • S

    Ripristina

  • D (Shank diameter)(mm)

    • 10
    • 13
    • 16
    • 20
    • 25
    • 32
    • 38
    • 45

    Ripristina

  • P (Tip dimension)(mm)

     [3-44.97/0.01mmpezzi]

    Ripristina

  • L (L dimension)(mm)

     [60-120/10mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

     [47-69.9/0.1mmpezzi][70.1-79.9/0.1mmpezzi][80.1-89.9/0.1mmpezzi][90.1-99.9/0.1mmpezzi][100.1-109.9/0.1mmpezzi][110.1-119.9/0.1mmpezzi][60-110/10mmpezzi]

    Ripristina

  • R (Tip corner R)(mm)

     

    Ripristina

  • W (Tip dimension)(mm)

     [3-44.97/0.01mmpezzi]

    Ripristina

  • Tipo

    • T-SJAL-C
    • T-SJAS-C
    • T-SJDL-C
    • T-SJDS-C
    • T-SJEL-C
    • T-SJES-C
    • T-SJGL-C
    • T-SJGS-C
    • T-SJRL-C
    • T-SJRS-C
    • T-SJVAL-C
    • T-SJVAS-C
    • T-SJVDL-C
    • T-SJVDS-C
    • T-SJVEL-C
    • T-SJVES-C
    • T-SJVGL-C
    • T-SJVGS-C
    • T-SJVRL-C
    • T-SJVRS-C

    Ripristina

  • Tip shape

    • A
    • D
    • R
    • E
    • G

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.