• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni da taglio / per impieghi gravosi / testa cilindrica / perno rompi cordone / configurabile / WPC, HW

Punzoni da taglio / per impieghi gravosi / testa cilindrica / perno rompi cordone / configurabile / WPC, HW

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • FLANGE
  • POWDER HSS
  • HW
  • WPC

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. Avanti >>
Codice componente
AHW-LFAPJGL8-[70-130/0.1]-P[4-7.99/0.01]-W[3-7.97/0.01]
AHW-LFAPJGL10-[70-130/0.1]-P[5-9.99/0.01]-W[3-9.97/0.01]
AHW-LFAPJGL13-[70-130/0.1]-P[6-12.99/0.01]-W[6-12.97/0.01]
AHW-LFAPJGL16-[80-130/0.1]-P[10-15.99/0.01]-W[6-15.97/0.01]
AHW-LFAPJGL20-[80-130/0.1]-P[13-19.99/0.01]-W[6-19.97/0.01]
AHW-LFAPJGL25-[80-130/0.1]-P[18-24.99/0.01]-W[6-24.97/0.01]
AHW-LFAPJGS8-[60-130/0.1]-P[4-7.99/0.01]-W[3-7.97/0.01]
AHW-LFAPJGS10-[60-130/0.1]-P[5-9.99/0.01]-W[3-9.97/0.01]
AHW-LFAPJGS13-[60-130/0.1]-P[6-12.99/0.01]-W[6-12.97/0.01]
AHW-LFAPJGS16-[70-130/0.1]-P[10-15.99/0.01]-W[6-15.97/0.01]
AHW-LFAPJGS20-[70-130/0.1]-P[13-19.99/0.01]-W[6-19.97/0.01]
AHW-LFAPJGS25-[70-130/0.1]-P[18-24.99/0.01]-W[6-24.97/0.01]
AHW-LFAPJVGL8-[70-100/0.1]-P[4-7.99/0.01]-W[3-7.97/0.01]
AHW-LFAPJVGL10-[70-100/0.1]-P[5-9.99/0.01]-W[3-9.97/0.01]
AHW-LFAPJVGL13-[70-100/0.1]-P[6-12.99/0.01]-W[6-12.97/0.01]
AHW-LFAPJVGL16-[80-100/0.1]-P[10-15.99/0.01]-W[6-15.97/0.01]
AHW-LFAPJVGL20-[80-100/0.1]-P[13-19.99/0.01]-W[6-19.97/0.01]
AHW-LFAPJVGL25-[80-100/0.1]-P[18-24.99/0.01]-W[6-24.97/0.01]
AHW-LFAPJVGS8-[70-100/0.1]-P[4-7.99/0.01]-W[3-7.97/0.01]
AHW-LFAPJVGS10-[70-100/0.1]-P[5-9.99/0.01]-W[3-9.97/0.01]
AHW-LFAPJVGS13-[70-100/0.1]-P[6-12.99/0.01]-W[6-12.97/0.01]
AHW-LFAPJVGS16-[70-100/0.1]-P[10-15.99/0.01]-W[6-15.97/0.01]
AHW-LFAPJVGS20-[70-100/0.1]-P[13-19.99/0.01]-W[6-19.97/0.01]
AHW-LFAPJVGS25-[70-100/0.1]-P[18-24.99/0.01]-W[6-24.97/0.01]
AW-LFAPJGL8-[70-130/0.1]-P[4-7.99/0.01]-W[3-7.97/0.01]
AW-LFAPJGL10-[70-130/0.1]-P[5-9.99/0.01]-W[3-9.97/0.01]
AW-LFAPJGL13-[70-130/0.1]-P[6-12.99/0.01]-W[6-12.97/0.01]
AW-LFAPJGL16-[80-130/0.1]-P[10-15.99/0.01]-W[6-15.97/0.01]
AW-LFAPJGL20-[80-130/0.1]-P[13-19.99/0.01]-W[6-19.97/0.01]
AW-LFAPJGL25-[80-130/0.1]-P[18-24.99/0.01]-W[6-24.97/0.01]
AW-LFAPJGS8-[60-130/0.1]-P[4-7.99/0.01]-W[3-7.97/0.01]
AW-LFAPJGS10-[60-130/0.1]-P[5-9.99/0.01]-W[3-9.97/0.01]
AW-LFAPJGS13-[60-130/0.1]-P[6-12.99/0.01]-W[6-12.97/0.01]
AW-LFAPJGS16-[70-130/0.1]-P[10-15.99/0.01]-W[6-15.97/0.01]
AW-LFAPJGS20-[70-130/0.1]-P[13-19.99/0.01]-W[6-19.97/0.01]
AW-LFAPJGS25-[70-130/0.1]-P[18-24.99/0.01]-W[6-24.97/0.01]
AW-LFAPJVGL8-[70-100/0.1]-P[4-7.99/0.01]-W[3-7.97/0.01]
AW-LFAPJVGL10-[70-100/0.1]-P[5-9.99/0.01]-W[3-9.97/0.01]
AW-LFAPJVGL13-[70-100/0.1]-P[6-12.99/0.01]-W[6-12.97/0.01]
AW-LFAPJVGL16-[80-100/0.1]-P[10-15.99/0.01]-W[6-15.97/0.01]
AW-LFAPJVGL20-[80-100/0.1]-P[13-19.99/0.01]-W[6-19.97/0.01]
AW-LFAPJVGL25-[80-100/0.1]-P[18-24.99/0.01]-W[6-24.97/0.01]
AW-LFAPJVGS8-[70-100/0.1]-P[4-7.99/0.01]-W[3-7.97/0.01]
AW-LFAPJVGS10-[70-100/0.1]-P[5-9.99/0.01]-W[3-9.97/0.01]
AW-LFAPJVGS13-[70-100/0.1]-P[6-12.99/0.01]-W[6-12.97/0.01]
AW-LFAPJVGS16-[70-100/0.1]-P[10-15.99/0.01]-W[6-15.97/0.01]
AW-LFAPJVGS20-[70-100/0.1]-P[13-19.99/0.01]-W[6-19.97/0.01]
AW-LFAPJVGS25-[70-100/0.1]-P[18-24.99/0.01]-W[6-24.97/0.01]
HW-LFAPJGL8-[70-130/0.1]-P[4-7.99/0.01]-W[3-7.97/0.01]
HW-LFAPJGL10-[70-130/0.1]-P[5-9.99/0.01]-W[3-9.97/0.01]
HW-LFAPJGL13-[70-130/0.1]-P[6-12.99/0.01]-W[6-12.97/0.01]
HW-LFAPJGL16-[80-130/0.1]-P[10-15.99/0.01]-W[6-15.97/0.01]
HW-LFAPJGL20-[80-130/0.1]-P[13-19.99/0.01]-W[6-19.97/0.01]
HW-LFAPJGL25-[80-130/0.1]-P[18-24.99/0.01]-W[6-24.97/0.01]
HW-LFAPJGS8-[60-130/0.1]-P[4-7.99/0.01]-W[3-7.97/0.01]
HW-LFAPJGS10-[60-130/0.1]-P[5-9.99/0.01]-W[3-9.97/0.01]
HW-LFAPJGS13-[60-130/0.1]-P[6-12.99/0.01]-W[6-12.97/0.01]
HW-LFAPJGS16-[70-130/0.1]-P[10-15.99/0.01]-W[6-15.97/0.01]
HW-LFAPJGS20-[70-130/0.1]-P[13-19.99/0.01]-W[6-19.97/0.01]
HW-LFAPJGS25-[70-130/0.1]-P[18-24.99/0.01]-W[6-24.97/0.01]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSJector Tip shape Surface treatment Shank diameter D tolerance B (Tip length) D (Shank diameter)
(mm) 		P (Tip dimension)
(mm) 		L (L dimension)
(mm) 		R (Tip corner R)
(mm) 		W (Tip dimension)
(mm)

-

1 Preventivo 10Standard typeGHW coating+0.005/0L84 ～ 7.9970 ～ 130-3 ～ 7.97

-

1 Preventivo 10Standard typeGHW coating+0.005/0L105 ～ 9.9970 ～ 130-3 ～ 9.97

-

1 Preventivo 10Standard typeGHW coating+0.005/0L136 ～ 12.9970 ～ 130-6 ～ 12.97

-

1 Preventivo 10Standard typeGHW coating+0.005/0L1610 ～ 15.9980 ～ 130-6 ～ 15.97

-

1 Preventivo 10Standard typeGHW coating+0.005/0L2013 ～ 19.9980 ～ 130-6 ～ 19.97

-

1 Preventivo 10Standard typeGHW coating+0.005/0L2518 ～ 24.9980 ～ 130-6 ～ 24.97

-

1 Preventivo 10Standard typeGHW coating+0.005/0S84 ～ 7.9960 ～ 130-3 ～ 7.97

-

1 Preventivo 10Standard typeGHW coating+0.005/0S105 ～ 9.9960 ～ 130-3 ～ 9.97

-

1 Preventivo 10Standard typeGHW coating+0.005/0S136 ～ 12.9960 ～ 130-6 ～ 12.97

-

1 Preventivo 10Standard typeGHW coating+0.005/0S1610 ～ 15.9970 ～ 130-6 ～ 15.97

-

1 Preventivo 10Standard typeGHW coating+0.005/0S2013 ～ 19.9970 ～ 130-6 ～ 19.97

-

1 Preventivo 10Standard typeGHW coating+0.005/0S2518 ～ 24.9970 ～ 130-6 ～ 24.97

-

1 Preventivo 10Spring and pin reinforced typeGHW coating+0.005/0L84 ～ 7.9970 ～ 100-3 ～ 7.97

-

1 Preventivo 10Spring and pin reinforced typeGHW coating+0.005/0L105 ～ 9.9970 ～ 100-3 ～ 9.97

-

1 Preventivo 10Spring and pin reinforced typeGHW coating+0.005/0L136 ～ 12.9970 ～ 100-6 ～ 12.97

-

1 Preventivo 10Spring and pin reinforced typeGHW coating+0.005/0L1610 ～ 15.9980 ～ 100-6 ～ 15.97

-

1 Preventivo 10Spring and pin reinforced typeGHW coating+0.005/0L2013 ～ 19.9980 ～ 100-6 ～ 19.97

-

1 Preventivo 10Spring and pin reinforced typeGHW coating+0.005/0L2518 ～ 24.9980 ～ 100-6 ～ 24.97

-

1 Preventivo 10Spring and pin reinforced typeGHW coating+0.005/0S84 ～ 7.9970 ～ 100-3 ～ 7.97

-

1 Preventivo 10Spring and pin reinforced typeGHW coating+0.005/0S105 ～ 9.9970 ～ 100-3 ～ 9.97

-

1 Preventivo 10Spring and pin reinforced typeGHW coating+0.005/0S136 ～ 12.9970 ～ 100-6 ～ 12.97

-

1 Preventivo 10Spring and pin reinforced typeGHW coating+0.005/0S1610 ～ 15.9970 ～ 100-6 ～ 15.97

-

1 Preventivo 10Spring and pin reinforced typeGHW coating+0.005/0S2013 ～ 19.9970 ～ 100-6 ～ 19.97

-

1 Preventivo 10Spring and pin reinforced typeGHW coating+0.005/0S2518 ～ 24.9970 ～ 100-6 ～ 24.97

-

1 Preventivo 10Standard typeGWPC+0.005/0L84 ～ 7.9970 ～ 130-3 ～ 7.97

-

1 Preventivo 10Standard typeGWPC+0.005/0L105 ～ 9.9970 ～ 130-3 ～ 9.97

-

1 Preventivo 10Standard typeGWPC+0.005/0L136 ～ 12.9970 ～ 130-6 ～ 12.97

-

1 Preventivo 10Standard typeGWPC+0.005/0L1610 ～ 15.9980 ～ 130-6 ～ 15.97

-

1 Preventivo 10Standard typeGWPC+0.005/0L2013 ～ 19.9980 ～ 130-6 ～ 19.97

-

1 Preventivo 10Standard typeGWPC+0.005/0L2518 ～ 24.9980 ～ 130-6 ～ 24.97

-

1 Preventivo 10Standard typeGWPC+0.005/0S84 ～ 7.9960 ～ 130-3 ～ 7.97

-

1 Preventivo 10Standard typeGWPC+0.005/0S105 ～ 9.9960 ～ 130-3 ～ 9.97

-

1 Preventivo 10Standard typeGWPC+0.005/0S136 ～ 12.9960 ～ 130-6 ～ 12.97

-

1 Preventivo 10Standard typeGWPC+0.005/0S1610 ～ 15.9970 ～ 130-6 ～ 15.97

-

1 Preventivo 10Standard typeGWPC+0.005/0S2013 ～ 19.9970 ～ 130-6 ～ 19.97

-

1 Preventivo 10Standard typeGWPC+0.005/0S2518 ～ 24.9970 ～ 130-6 ～ 24.97

-

1 Preventivo 10Spring and pin reinforced typeGWPC+0.005/0L84 ～ 7.9970 ～ 100-3 ～ 7.97

-

1 Preventivo 10Spring and pin reinforced typeGWPC+0.005/0L105 ～ 9.9970 ～ 100-3 ～ 9.97

-

1 Preventivo 10Spring and pin reinforced typeGWPC+0.005/0L136 ～ 12.9970 ～ 100-6 ～ 12.97

-

1 Preventivo 10Spring and pin reinforced typeGWPC+0.005/0L1610 ～ 15.9980 ～ 100-6 ～ 15.97

-

1 Preventivo 10Spring and pin reinforced typeGWPC+0.005/0L2013 ～ 19.9980 ～ 100-6 ～ 19.97

-

1 Preventivo 10Spring and pin reinforced typeGWPC+0.005/0L2518 ～ 24.9980 ～ 100-6 ～ 24.97

-

1 Preventivo 10Spring and pin reinforced typeGWPC+0.005/0S84 ～ 7.9970 ～ 100-3 ～ 7.97

-

1 Preventivo 10Spring and pin reinforced typeGWPC+0.005/0S105 ～ 9.9970 ～ 100-3 ～ 9.97

-

1 Preventivo 10Spring and pin reinforced typeGWPC+0.005/0S136 ～ 12.9970 ～ 100-6 ～ 12.97

-

1 Preventivo 10Spring and pin reinforced typeGWPC+0.005/0S1610 ～ 15.9970 ～ 100-6 ～ 15.97

-

1 Preventivo 10Spring and pin reinforced typeGWPC+0.005/0S2013 ～ 19.9970 ～ 100-6 ～ 19.97

-

1 Preventivo 10Spring and pin reinforced typeGWPC+0.005/0S2518 ～ 24.9970 ～ 100-6 ～ 24.97

-

1 Preventivo 10Standard typeGHW coatingm5L84 ～ 7.9970 ～ 130-3 ～ 7.97

-

1 Preventivo 10Standard typeGHW coatingm5L105 ～ 9.9970 ～ 130-3 ～ 9.97

-

1 Preventivo 10Standard typeGHW coatingm5L136 ～ 12.9970 ～ 130-6 ～ 12.97

-

1 Preventivo 10Standard typeGHW coatingm5L1610 ～ 15.9980 ～ 130-6 ～ 15.97

-

1 Preventivo 10Standard typeGHW coatingm5L2013 ～ 19.9980 ～ 130-6 ～ 19.97

-

1 Preventivo 10Standard typeGHW coatingm5L2518 ～ 24.9980 ～ 130-6 ～ 24.97

-

1 Preventivo 10Standard typeGHW coatingm5S84 ～ 7.9960 ～ 130-3 ～ 7.97

-

1 Preventivo 10Standard typeGHW coatingm5S105 ～ 9.9960 ～ 130-3 ～ 9.97

-

1 Preventivo 10Standard typeGHW coatingm5S136 ～ 12.9960 ～ 130-6 ～ 12.97

-

1 Preventivo 10Standard typeGHW coatingm5S1610 ～ 15.9970 ～ 130-6 ～ 15.97

-

1 Preventivo 10Standard typeGHW coatingm5S2013 ～ 19.9970 ～ 130-6 ～ 19.97

-

1 Preventivo 10Standard typeGHW coatingm5S2518 ～ 24.9970 ～ 130-6 ～ 24.97

Loading...

  1. 1
  2. 2
  3. Avanti >>
 

Informazioni di base

Heavy-load punches Yes Shank type Single-stepped Material Powdered high-speed steel
Shank (mounting part) shape Standard T (Head thickness/plate thickness)(mm) 8

Configura

Ripristina

96Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Jector

    • Standard type
    • Spring and pin reinforced type

    Ripristina

  • Surface treatment

    • HW coating
    • WPC

    Ripristina

  • Shank diameter D tolerance

    • +0.005/0
    • m5

    Ripristina

  • B (Tip length)

    • L
    • S

    Ripristina

  • D (Shank diameter)(mm)

    • 8
    • 10
    • 13
    • 16
    • 20
    • 25

    Ripristina

  • P (Tip dimension)(mm)

     [4-24.99/0.01mmpezzi]

    Ripristina

  • L (L dimension)(mm)

     [60-130/0.1mmpezzi]

    Ripristina

  • R (Tip corner R)(mm)

     

    Ripristina

  • W (Tip dimension)(mm)

     [3-24.97/0.01mmpezzi]

    Ripristina

  • Tipo

    • AHW-LFAPJAL
    • AHW-LFAPJAS
    • AHW-LFAPJDL
    • AHW-LFAPJDS
    • AHW-LFAPJEL
    • AHW-LFAPJES
    • AHW-LFAPJGL
    • AHW-LFAPJGS
    • AHW-LFAPJRL
    • AHW-LFAPJRS
    • AHW-LFAPJVAL
    • AHW-LFAPJVAS
    • AHW-LFAPJVDL
    • AHW-LFAPJVDS
    • AHW-LFAPJVEL
    • AHW-LFAPJVES
    • AHW-LFAPJVGL
    • AHW-LFAPJVGS
    • AHW-LFAPJVRL
    • AHW-LFAPJVRS
    • AW-LFAPJAL
    • AW-LFAPJAS
    • AW-LFAPJDL
    • AW-LFAPJDS
    • AW-LFAPJEL
    • AW-LFAPJES
    • AW-LFAPJGL
    • AW-LFAPJGS
    • AW-LFAPJRL
    • AW-LFAPJRS
    • AW-LFAPJVAL
    • AW-LFAPJVAS
    • AW-LFAPJVDL
    • AW-LFAPJVDS
    • AW-LFAPJVEL
    • AW-LFAPJVES
    • AW-LFAPJVGL
    • AW-LFAPJVGS
    • AW-LFAPJVRL
    • AW-LFAPJVRS
    • HW-LFAPJAL
    • HW-LFAPJAS
    • HW-LFAPJDL
    • HW-LFAPJDS
    • HW-LFAPJEL
    • HW-LFAPJES
    • HW-LFAPJGL
    • HW-LFAPJGS
    • HW-LFAPJRL
    • HW-LFAPJRS
    • HW-LFAPJVAL
    • HW-LFAPJVAS
    • HW-LFAPJVDL
    • HW-LFAPJVDS
    • HW-LFAPJVEL
    • HW-LFAPJVES
    • HW-LFAPJVGL
    • HW-LFAPJVGS
    • HW-LFAPJVRL
    • HW-LFAPJVRS
    • W-LFAPJAL
    • W-LFAPJAS
    • W-LFAPJDL
    • W-LFAPJDS
    • W-LFAPJEL
    • W-LFAPJES
    • W-LFAPJGL
    • W-LFAPJGS
    • W-LFAPJRL
    • W-LFAPJRS
    • W-LFAPJVAL
    • W-LFAPJVAS
    • W-LFAPJVDL
    • W-LFAPJVDS
    • W-LFAPJVEL
    • W-LFAPJVES
    • W-LFAPJVGL
    • W-LFAPJVGS
    • W-LFAPJVRL
    • W-LFAPJVRS

    Ripristina

  • Tip shape

    • A
    • D
    • R
    • E
    • G

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.