• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni da taglio / senza testa / filettatura interna / perno di forzamento / sospensione laterale del Punzoni / WPC

Punzoni da taglio / senza testa / filettatura interna / perno di forzamento / sospensione laterale del Punzoni / WPC

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • KEY
  • SKD11
  • POWDER HSS
  • WPC

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Avanti >>
Codice componente
A-SKJEL6-[50-80/10]-P[2-5.97/0.01]-W[2-5.97/0.01]-T[5.1-80/0.1]
A-SKJEL6-[50-80/10]-P[2-5.97/0.01]-WC[1.8-1.99/0.01]-T[5.1-80/0.1]
A-SKJEL6-[50-80/10]-PC[1.8-1.99/0.01]-W[2-5.97/0.01]-T[5.1-80/0.1]
A-SKJEL6-[50-80/10]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]-T[5.1-80/0.1]
A-SKJEL6-LC[35-79.9/0.1]-P[2-5.97/0.01]-W[2-5.97/0.01]-T[5.1-80/0.1]
A-SKJEL6-LC[35-79.9/0.1]-P[2-5.97/0.01]-WC[1.8-1.99/0.01]-T[5.1-80/0.1]
A-SKJEL6-LC[35-79.9/0.1]-PC[1.8-1.99/0.01]-W[2-5.97/0.01]-T[5.1-80/0.1]
A-SKJEL6-LC[35-79.9/0.1]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]-T[5.1-80/0.1]
A-SKJEL6-LCT[35-79.9/0.1]-P[2-5.97/0.01]-W[2-5.97/0.01]-T[5.1-80/0.1]
A-SKJEL6-LCT[35-79.9/0.1]-P[2-5.97/0.01]-WC[1.8-1.99/0.01]-T[5.1-80/0.1]
A-SKJEL6-LCT[35-79.9/0.1]-PC[1.8-1.99/0.01]-W[2-5.97/0.01]-T[5.1-80/0.1]
A-SKJEL6-LCT[35-79.9/0.1]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]-T[5.1-80/0.1]
A-SKJEL8-[50-100/10]-P[3-7.97/0.01]-W[3-7.97/0.01]-T[5.1-100/0.1]
A-SKJEL8-[50-100/10]-P[3-7.97/0.01]-WC[2.5-2.99/0.01]-T[5.1-100/0.1]
A-SKJEL8-[50-100/10]-PC[2.5-2.99/0.01]-W[3-7.97/0.01]-T[5.1-100/0.1]
A-SKJEL8-[50-100/10]-PC[2.5-2.99/0.01]-WC[2.5-2.99/0.01]-T[5.1-100/0.1]
A-SKJEL8-LC[35-99.9/0.1]-P[3-7.97/0.01]-W[3-7.97/0.01]-T[5.1-100/0.1]
A-SKJEL8-LC[35-99.9/0.1]-P[3-7.97/0.01]-WC[2.5-2.99/0.01]-T[5.1-100/0.1]
A-SKJEL8-LC[35-99.9/0.1]-PC[2.5-2.99/0.01]-W[3-7.97/0.01]-T[5.1-100/0.1]
A-SKJEL8-LC[35-99.9/0.1]-PC[2.5-2.99/0.01]-WC[2.5-2.99/0.01]-T[5.1-100/0.1]
A-SKJEL8-LCT[35-99.9/0.1]-P[3-7.97/0.01]-W[3-7.97/0.01]-T[5.1-100/0.1]
A-SKJEL8-LCT[35-99.9/0.1]-P[3-7.97/0.01]-WC[2.5-2.99/0.01]-T[5.1-100/0.1]
A-SKJEL8-LCT[35-99.9/0.1]-PC[2.5-2.99/0.01]-W[3-7.97/0.01]-T[5.1-100/0.1]
A-SKJEL8-LCT[35-99.9/0.1]-PC[2.5-2.99/0.01]-WC[2.5-2.99/0.01]-T[5.1-100/0.1]
A-SKJEL10-[50-100/10]-P[3-9.97/0.01]-W[3-9.97/0.01]-T[5.1-100/0.1]
A-SKJEL10-[50-100/10]-P[3-9.97/0.01]-WC[2.8-2.99/0.01]-T[5.1-100/0.1]
A-SKJEL10-[50-100/10]-PC[2.8-2.99/0.01]-W[3-9.97/0.01]-T[5.1-100/0.1]
A-SKJEL10-[50-100/10]-PC[2.8-2.99/0.01]-WC[2.8-2.99/0.01]-T[5.1-100/0.1]
A-SKJEL10-LC[35-99.9/0.1]-P[3-9.97/0.01]-W[3-9.97/0.01]-T[5.1-100/0.1]
A-SKJEL10-LC[35-99.9/0.1]-P[3-9.97/0.01]-WC[2.8-2.99/0.01]-T[5.1-100/0.1]
A-SKJEL10-LC[35-99.9/0.1]-PC[2.8-2.99/0.01]-W[3-9.97/0.01]-T[5.1-100/0.1]
A-SKJEL10-LC[35-99.9/0.1]-PC[2.8-2.99/0.01]-WC[2.8-2.99/0.01]-T[5.1-100/0.1]
A-SKJEL10-LCT[35-99.9/0.1]-P[3-9.97/0.01]-W[3-9.97/0.01]-T[5.1-100/0.1]
A-SKJEL10-LCT[35-99.9/0.1]-P[3-9.97/0.01]-WC[2.8-2.99/0.01]-T[5.1-100/0.1]
A-SKJEL10-LCT[35-99.9/0.1]-PC[2.8-2.99/0.01]-W[3-9.97/0.01]-T[5.1-100/0.1]
A-SKJEL10-LCT[35-99.9/0.1]-PC[2.8-2.99/0.01]-WC[2.8-2.99/0.01]-T[5.1-100/0.1]
A-SKJEL13-[50-100/10]-P[6-12.97/0.01]-W[6-12.97/0.01]-T[5.1-100/0.1]
A-SKJEL13-[50-100/10]-P[6-12.97/0.01]-WC[5-5.99/0.01]-T[5.1-100/0.1]
A-SKJEL13-[50-100/10]-PC[5-5.99/0.01]-W[6-12.97/0.01]-T[5.1-100/0.1]
A-SKJEL13-[50-100/10]-PC[5-5.99/0.01]-WC[5-5.99/0.01]-T[5.1-100/0.1]
A-SKJEL13-LC[35-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01]-T[5.1-100/0.1]
A-SKJEL13-LC[35-99.9/0.1]-P[6-12.97/0.01]-WC[5-5.99/0.01]-T[5.1-100/0.1]
A-SKJEL13-LC[35-99.9/0.1]-PC[5-5.99/0.01]-W[6-12.97/0.01]-T[5.1-100/0.1]
A-SKJEL13-LC[35-99.9/0.1]-PC[5-5.99/0.01]-WC[5-5.99/0.01]-T[5.1-100/0.1]
A-SKJEL13-LCT[35-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01]-T[5.1-100/0.1]
A-SKJEL13-LCT[35-99.9/0.1]-P[6-12.97/0.01]-WC[5-5.99/0.01]-T[5.1-100/0.1]
A-SKJEL13-LCT[35-99.9/0.1]-PC[5-5.99/0.01]-W[6-12.97/0.01]-T[5.1-100/0.1]
A-SKJEL13-LCT[35-99.9/0.1]-PC[5-5.99/0.01]-WC[5-5.99/0.01]-T[5.1-100/0.1]
A-SKJEL16-[60-100/10]-P[6-15.97/0.01]-W[6-15.97/0.01]-T[5.1-100/0.1]
A-SKJEL16-[60-100/10]-P[6-15.97/0.01]-WC[5-5.99/0.01]-T[5.1-100/0.1]
A-SKJEL16-[60-100/10]-PC[5-5.99/0.01]-W[6-15.97/0.01]-T[5.1-100/0.1]
A-SKJEL16-[60-100/10]-PC[5-5.99/0.01]-WC[5-5.99/0.01]-T[5.1-100/0.1]
A-SKJEL16-LC[35-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01]-T[5.1-100/0.1]
A-SKJEL16-LC[35-99.9/0.1]-P[6-15.97/0.01]-WC[5-5.99/0.01]-T[5.1-100/0.1]
A-SKJEL16-LC[35-99.9/0.1]-PC[5-5.99/0.01]-W[6-15.97/0.01]-T[5.1-100/0.1]
A-SKJEL16-LC[35-99.9/0.1]-PC[5-5.99/0.01]-WC[5-5.99/0.01]-T[5.1-100/0.1]
A-SKJEL16-LCT[35-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01]-T[5.1-100/0.1]
A-SKJEL16-LCT[35-99.9/0.1]-P[6-15.97/0.01]-WC[5-5.99/0.01]-T[5.1-100/0.1]
A-SKJEL16-LCT[35-99.9/0.1]-PC[5-5.99/0.01]-W[6-15.97/0.01]-T[5.1-100/0.1]
A-SKJEL16-LCT[35-99.9/0.1]-PC[5-5.99/0.01]-WC[5-5.99/0.01]-T[5.1-100/0.1]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape Surface treatment Shank diameter D tolerance B (Tip length) D (Shank diameter)
(mm) 		P (Tip dimension)
(mm) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		LCT (Head thickness tolerance change + Total length alteration)
(mm) 		PC (Tip dimension alteration)
(mm) 		R (Tip corner R)
(mm) 		W (Tip dimension)
(mm) 		T (Key groove position)
(mm) 		WC (Tip dimension alteration)
(mm)
1 Preventivo 10ENone+0.005/0L62 ～ 5.9750 ～ 80----2 ～ 5.975.1 ～ 80-
1 Preventivo 10ENone+0.005/0L62 ～ 5.9750 ～ 80-----5.1 ～ 801.8 ～ 1.99
1 Preventivo 10ENone+0.005/0L6-50 ～ 80--1.8 ～ 1.99-2 ～ 5.975.1 ～ 80-
1 Preventivo 10ENone+0.005/0L6-50 ～ 80--1.8 ～ 1.99--5.1 ～ 801.8 ～ 1.99
1 Preventivo 10ENone+0.005/0L62 ～ 5.97-35 ～ 79.9---2 ～ 5.975.1 ～ 80-
1 Preventivo 10ENone+0.005/0L62 ～ 5.97-35 ～ 79.9----5.1 ～ 801.8 ～ 1.99
1 Preventivo 10ENone+0.005/0L6--35 ～ 79.9-1.8 ～ 1.99-2 ～ 5.975.1 ～ 80-
1 Preventivo 10ENone+0.005/0L6--35 ～ 79.9-1.8 ～ 1.99--5.1 ～ 801.8 ～ 1.99
1 Preventivo 10ENone+0.005/0L62 ～ 5.97--35 ～ 79.9--2 ～ 5.975.1 ～ 80-
1 Preventivo 10ENone+0.005/0L62 ～ 5.97--35 ～ 79.9---5.1 ～ 801.8 ～ 1.99
1 Preventivo 10ENone+0.005/0L6---35 ～ 79.91.8 ～ 1.99-2 ～ 5.975.1 ～ 80-
1 Preventivo 10ENone+0.005/0L6---35 ～ 79.91.8 ～ 1.99--5.1 ～ 801.8 ～ 1.99
1 Preventivo 10ENone+0.005/0L83 ～ 7.9750 ～ 100----3 ～ 7.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L83 ～ 7.9750 ～ 100-----5.1 ～ 1002.5 ～ 2.99
1 Preventivo 10ENone+0.005/0L8-50 ～ 100--2.5 ～ 2.99-3 ～ 7.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L8-50 ～ 100--2.5 ～ 2.99--5.1 ～ 1002.5 ～ 2.99
1 Preventivo 10ENone+0.005/0L83 ～ 7.97-35 ～ 99.9---3 ～ 7.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L83 ～ 7.97-35 ～ 99.9----5.1 ～ 1002.5 ～ 2.99
1 Preventivo 10ENone+0.005/0L8--35 ～ 99.9-2.5 ～ 2.99-3 ～ 7.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L8--35 ～ 99.9-2.5 ～ 2.99--5.1 ～ 1002.5 ～ 2.99
1 Preventivo 10ENone+0.005/0L83 ～ 7.97--35 ～ 99.9--3 ～ 7.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L83 ～ 7.97--35 ～ 99.9---5.1 ～ 1002.5 ～ 2.99
1 Preventivo 10ENone+0.005/0L8---35 ～ 99.92.5 ～ 2.99-3 ～ 7.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L8---35 ～ 99.92.5 ～ 2.99--5.1 ～ 1002.5 ～ 2.99
1 Preventivo 10ENone+0.005/0L103 ～ 9.9750 ～ 100----3 ～ 9.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L103 ～ 9.9750 ～ 100-----5.1 ～ 1002.8 ～ 2.99
1 Preventivo 10ENone+0.005/0L10-50 ～ 100--2.8 ～ 2.99-3 ～ 9.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L10-50 ～ 100--2.8 ～ 2.99--5.1 ～ 1002.8 ～ 2.99
1 Preventivo 10ENone+0.005/0L103 ～ 9.97-35 ～ 99.9---3 ～ 9.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L103 ～ 9.97-35 ～ 99.9----5.1 ～ 1002.8 ～ 2.99
1 Preventivo 10ENone+0.005/0L10--35 ～ 99.9-2.8 ～ 2.99-3 ～ 9.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L10--35 ～ 99.9-2.8 ～ 2.99--5.1 ～ 1002.8 ～ 2.99
1 Preventivo 10ENone+0.005/0L103 ～ 9.97--35 ～ 99.9--3 ～ 9.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L103 ～ 9.97--35 ～ 99.9---5.1 ～ 1002.8 ～ 2.99
1 Preventivo 10ENone+0.005/0L10---35 ～ 99.92.8 ～ 2.99-3 ～ 9.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L10---35 ～ 99.92.8 ～ 2.99--5.1 ～ 1002.8 ～ 2.99
1 Preventivo 10ENone+0.005/0L136 ～ 12.9750 ～ 100----6 ～ 12.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L136 ～ 12.9750 ～ 100-----5.1 ～ 1005 ～ 5.99
1 Preventivo 10ENone+0.005/0L13-50 ～ 100--5 ～ 5.99-6 ～ 12.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L13-50 ～ 100--5 ～ 5.99--5.1 ～ 1005 ～ 5.99
1 Preventivo 10ENone+0.005/0L136 ～ 12.97-35 ～ 99.9---6 ～ 12.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L136 ～ 12.97-35 ～ 99.9----5.1 ～ 1005 ～ 5.99
1 Preventivo 10ENone+0.005/0L13--35 ～ 99.9-5 ～ 5.99-6 ～ 12.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L13--35 ～ 99.9-5 ～ 5.99--5.1 ～ 1005 ～ 5.99
1 Preventivo 10ENone+0.005/0L136 ～ 12.97--35 ～ 99.9--6 ～ 12.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L136 ～ 12.97--35 ～ 99.9---5.1 ～ 1005 ～ 5.99
1 Preventivo 10ENone+0.005/0L13---35 ～ 99.95 ～ 5.99-6 ～ 12.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L13---35 ～ 99.95 ～ 5.99--5.1 ～ 1005 ～ 5.99
1 Preventivo 10ENone+0.005/0L166 ～ 15.9760 ～ 100----6 ～ 15.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L166 ～ 15.9760 ～ 100-----5.1 ～ 1005 ～ 5.99
1 Preventivo 10ENone+0.005/0L16-60 ～ 100--5 ～ 5.99-6 ～ 15.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L16-60 ～ 100--5 ～ 5.99--5.1 ～ 1005 ～ 5.99
1 Preventivo 10ENone+0.005/0L166 ～ 15.97-35 ～ 99.9---6 ～ 15.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L166 ～ 15.97-35 ～ 99.9----5.1 ～ 1005 ～ 5.99
1 Preventivo 10ENone+0.005/0L16--35 ～ 99.9-5 ～ 5.99-6 ～ 15.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L16--35 ～ 99.9-5 ～ 5.99--5.1 ～ 1005 ～ 5.99
1 Preventivo 10ENone+0.005/0L166 ～ 15.97--35 ～ 99.9--6 ～ 15.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L166 ～ 15.97--35 ～ 99.9---5.1 ～ 1005 ～ 5.99
1 Preventivo 10ENone+0.005/0L16---35 ～ 99.95 ～ 5.99-6 ～ 15.975.1 ～ 100-
1 Preventivo 10ENone+0.005/0L16---35 ～ 99.95 ～ 5.99--5.1 ～ 1005 ～ 5.99

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Avanti >>
 

Informazioni di base

Heavy-load punches No Shank type Single-stepped Jector None
Material SKD11 Equivalent Shank (mounting part) shape With key groove

Configura

Ripristina

480Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Surface treatment

    • None
    • WPC

    Ripristina

  • Shank diameter D tolerance

    • +0.005/0
    • m5

    Ripristina

  • B (Tip length)

    • L
    • S

    Ripristina

  • D (Shank diameter)(mm)

    • 6
    • 8
    • 10
    • 13
    • 16

    Ripristina

  • P (Tip dimension)(mm)

     [2-15.97/0.01mmpezzi]

    Ripristina

  • L (L dimension)(mm)

     [40-100/10mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

     [35-99.9/0.1mmpezzi]

    Ripristina

  • LCT (Head thickness tolerance change + Total length alteration)(mm)

     [35-99.9/0.1mmpezzi]

    Ripristina

  • PC (Tip dimension alteration)(mm)

     [1.8-1.99/0.01mmpezzi][2.5-2.99/0.01mmpezzi][5-5.99/0.01mmpezzi]

    Ripristina

  • R (Tip corner R)(mm)

     

    Ripristina

  • W (Tip dimension)(mm)

     [2-15.97/0.01mmpezzi]

    Ripristina

  • T (Key groove position)(mm)

     [5.1-100/0.1mmpezzi]

    Ripristina

  • WC (Tip dimension alteration)(mm)

     [1.8-1.99/0.01mmpezzi][2.5-2.99/0.01mmpezzi][5-5.99/0.01mmpezzi]

    Ripristina

  • Tipo

    • A-SKJAL
    • A-SKJAS
    • A-SKJDL
    • A-SKJDS
    • A-SKJEL
    • A-SKJES
    • A-SKJGL
    • A-SKJGS
    • A-SKJRL
    • A-SKJRS
    • AW-SKJAL
    • AW-SKJAS
    • AW-SKJDL
    • AW-SKJDS
    • AW-SKJEL
    • AW-SKJES
    • AW-SKJGL
    • AW-SKJGS
    • AW-SKJRL
    • AW-SKJRS
    • SKJAL
    • SKJAS
    • SKJDL
    • SKJDS
    • SKJEL
    • SKJES
    • SKJGL
    • SKJGS
    • SKJRL
    • SKJRS
    • W-SKJAL
    • W-SKJAS
    • W-SKJDL
    • W-SKJDS
    • W-SKJEL
    • W-SKJES
    • W-SKJGL
    • W-SKJGS
    • W-SKJRL
    • W-SKJRS

    Ripristina

  • Tip shape

    • A
    • D
    • R
    • E
    • G

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.