• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Bussole di taglio cilindriche / efficiente in termini di costi (Codici componente - Download CAD)

Bussole di taglio cilindriche / efficiente in termini di costi

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • PRESS-FIT
  • SKD11
  • POWDER HSS

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. << Indietro
  2. 8
  3. 9
  4. 10
  5. 11
  6. 12
  7. Avanti >>
Codice componente
SR-ESDD45-[20,​22,​25,​30,​35]-P[6-35/0.01]-WC[3-35.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD45-[20,​22,​25,​30,​35]-PC[3-35.2/0.01]-W[6-35/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD45-[20,​22,​25,​30,​35]-PC[3-35.2/0.01]-WC[3-35.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD45-LC[10-35/0.1]-P[6-35/0.01]-W[6-35/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD45-LC[10-35/0.1]-P[6-35/0.01]-WC[3-35.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD45-LC[10-35/0.1]-PC[3-35.2/0.01]-W[6-35/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD45-LC[10-35/0.1]-PC[3-35.2/0.01]-WC[3-35.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD45-SLC[10-35/0.01]-P[6-35/0.01]-W[6-35/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD45-SLC[10-35/0.01]-P[6-35/0.01]-WC[3-35.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD45-SLC[10-35/0.01]-PC[3-35.2/0.01]-W[6-35/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD45-SLC[10-35/0.01]-PC[3-35.2/0.01]-WC[3-35.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD50-[20,​22,​25,​30,​35]-P[7-40/0.01]-W[7-40/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD50-[20,​22,​25,​30,​35]-P[7-40/0.01]-WC[3.5-40.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD50-[20,​22,​25,​30,​35]-PC[3.5-40.2/0.01]-W[7-40/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD50-[20,​22,​25,​30,​35]-PC[3.5-40.2/0.01]-WC[3.5-40.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD50-LC[10-35/0.1]-P[7-40/0.01]-W[7-40/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD50-LC[10-35/0.1]-P[7-40/0.01]-WC[3.5-40.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD50-LC[10-35/0.1]-PC[3.5-40.2/0.01]-W[7-40/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD50-LC[10-35/0.1]-PC[3.5-40.2/0.01]-WC[3.5-40.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD50-SLC[10-35/0.01]-P[7-40/0.01]-W[7-40/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD50-SLC[10-35/0.01]-P[7-40/0.01]-WC[3.5-40.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD50-SLC[10-35/0.01]-PC[3.5-40.2/0.01]-W[7-40/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD50-SLC[10-35/0.01]-PC[3.5-40.2/0.01]-WC[3.5-40.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD56-[20,​22,​25,​30,​35]-P[8-45/0.01]-W[8-45/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD56-[20,​22,​25,​30,​35]-P[8-45/0.01]-WC[4-45.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD56-[20,​22,​25,​30,​35]-PC[4-45.2/0.01]-W[8-45/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD56-[20,​22,​25,​30,​35]-PC[4-45.2/0.01]-WC[4-45.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD56-LC[10-35/0.1]-P[8-45/0.01]-W[8-45/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD56-LC[10-35/0.1]-P[8-45/0.01]-WC[4-45.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD56-LC[10-35/0.1]-PC[4-45.2/0.01]-W[8-45/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD56-LC[10-35/0.1]-PC[4-45.2/0.01]-WC[4-45.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD56-SLC[10-35/0.01]-P[8-45/0.01]-W[8-45/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD56-SLC[10-35/0.01]-P[8-45/0.01]-WC[4-45.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD56-SLC[10-35/0.01]-PC[4-45.2/0.01]-W[8-45/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-ESDD56-SLC[10-35/0.01]-PC[4-45.2/0.01]-WC[4-45.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD8-[16,​20,​22,​25,​30,​35]-P[1.9-4/0.01]-W[1-4/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD8-[16,​20,​22,​25,​30,​35]-PC[4.01-4.2/0.01]-W[1-4/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD8-LC[13-34.9/0.1]-P[1.9-4/0.01]-W[1-4/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD8-LC[13-34.9/0.1]-PC[4.01-4.2/0.01]-W[1-4/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD8-SLC[13-34.99/0.01]-P[1.9-4/0.01]-W[1-4/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD8-SLC[13-34.99/0.01]-PC[4.01-4.2/0.01]-W[1-4/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-[16,​20,​22,​25,​30,​35]-P[1.9-6/0.01]-W[1.2-6/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-[16,​20,​22,​25,​30,​35]-P[1.9-6/0.01]-WC[1-1.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-[16,​20,​22,​25,​30,​35]-PC[1-1.19/0.01]-W[1.2-6/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-[16,​20,​22,​25,​30,​35]-PC[1-1.19/0.01]-WC[1-1.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-[16,​20,​22,​25,​30,​35]-PC[6.01-6.2/0.01]-W[1.2-6/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-[16,​20,​22,​25,​30,​35]-PC[6.01-6.2/0.01]-WC[1-1.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-LC[13-34.9/0.1]-P[1.9-6/0.01]-W[1.2-6/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-LC[13-34.9/0.1]-P[1.9-6/0.01]-WC[1-1.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-LC[13-34.9/0.1]-PC[1-1.19/0.01]-W[1.2-6/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-LC[13-34.9/0.1]-PC[1-1.19/0.01]-WC[1-1.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-LC[13-34.9/0.1]-PC[6.01-6.2/0.01]-W[1.2-6/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-LC[13-34.9/0.1]-PC[6.01-6.2/0.01]-WC[1-1.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-SLC[13-34.99/0.01]-P[1.9-6/0.01]-W[1.2-6/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-SLC[13-34.99/0.01]-P[1.9-6/0.01]-WC[1-1.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-SLC[13-34.99/0.01]-PC[1-1.19/0.01]-W[1.2-6/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-SLC[13-34.99/0.01]-PC[1-1.19/0.01]-WC[1-1.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-SLC[13-34.99/0.01]-PC[6.01-6.2/0.01]-W[1.2-6/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD10-SLC[13-34.99/0.01]-PC[6.01-6.2/0.01]-WC[1-1.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRA-EPSDD13-[16,​20,​22,​25,​30,​35]-P[1.9-8/0.01]-W[1.5-8/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape Material Shank diameter D tolerance D (Shank diameter)
(mm) 		C (Clearance)
(mm) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		MT(Workpiece material thickness)
(mm) 		P (Tip dimension)
(mm) 		PC (Tip dimension alteration)
(mm) 		R (Tip corner R)
(mm) 		SLC (Full length alteration tolerance change)
(mm) 		W (Tip dimension)
(mm) 		WC (Tip dimension alteration)
(mm)

-

1 Preventivo 10DSKD11 Equivalentn5450.01 ～ 1020 ～ 35-0.15 ～ 86 ～ 35----3 ～ 35.2

-

1 Preventivo 10DSKD11 Equivalentn5450.01 ～ 1020 ～ 35-0.15 ～ 8-3 ～ 35.2--6 ～ 35-

-

1 Preventivo 10DSKD11 Equivalentn5450.01 ～ 1020 ～ 35-0.15 ～ 8-3 ～ 35.2---3 ～ 35.2

-

1 Preventivo 10DSKD11 Equivalentn5450.01 ～ 10-10 ～ 350.15 ～ 86 ～ 35---6 ～ 35-

-

1 Preventivo 10DSKD11 Equivalentn5450.01 ～ 10-10 ～ 350.15 ～ 86 ～ 35----3 ～ 35.2

-

1 Preventivo 10DSKD11 Equivalentn5450.01 ～ 10-10 ～ 350.15 ～ 8-3 ～ 35.2--6 ～ 35-

-

1 Preventivo 10DSKD11 Equivalentn5450.01 ～ 10-10 ～ 350.15 ～ 8-3 ～ 35.2---3 ～ 35.2

-

1 Preventivo 10DSKD11 Equivalentn5450.01 ～ 10--0.15 ～ 86 ～ 35--10 ～ 356 ～ 35-

-

1 Preventivo 10DSKD11 Equivalentn5450.01 ～ 10--0.15 ～ 86 ～ 35--10 ～ 35-3 ～ 35.2

-

1 Preventivo 10DSKD11 Equivalentn5450.01 ～ 10--0.15 ～ 8-3 ～ 35.2-10 ～ 356 ～ 35-

-

1 Preventivo 10DSKD11 Equivalentn5450.01 ～ 10--0.15 ～ 8-3 ～ 35.2-10 ～ 35-3 ～ 35.2

-

1 Preventivo 10DSKD11 Equivalentn5500.01 ～ 1020 ～ 35-0.15 ～ 87 ～ 40---7 ～ 40-

-

1 Preventivo 10DSKD11 Equivalentn5500.01 ～ 1020 ～ 35-0.15 ～ 87 ～ 40----3.5 ～ 40.2

-

1 Preventivo 10DSKD11 Equivalentn5500.01 ～ 1020 ～ 35-0.15 ～ 8-3.5 ～ 40.2--7 ～ 40-

-

1 Preventivo 10DSKD11 Equivalentn5500.01 ～ 1020 ～ 35-0.15 ～ 8-3.5 ～ 40.2---3.5 ～ 40.2

-

1 Preventivo 10DSKD11 Equivalentn5500.01 ～ 10-10 ～ 350.15 ～ 87 ～ 40---7 ～ 40-

-

1 Preventivo 10DSKD11 Equivalentn5500.01 ～ 10-10 ～ 350.15 ～ 87 ～ 40----3.5 ～ 40.2

-

1 Preventivo 10DSKD11 Equivalentn5500.01 ～ 10-10 ～ 350.15 ～ 8-3.5 ～ 40.2--7 ～ 40-

-

1 Preventivo 10DSKD11 Equivalentn5500.01 ～ 10-10 ～ 350.15 ～ 8-3.5 ～ 40.2---3.5 ～ 40.2

-

1 Preventivo 10DSKD11 Equivalentn5500.01 ～ 10--0.15 ～ 87 ～ 40--10 ～ 357 ～ 40-

-

1 Preventivo 10DSKD11 Equivalentn5500.01 ～ 10--0.15 ～ 87 ～ 40--10 ～ 35-3.5 ～ 40.2

-

1 Preventivo 10DSKD11 Equivalentn5500.01 ～ 10--0.15 ～ 8-3.5 ～ 40.2-10 ～ 357 ～ 40-

-

1 Preventivo 10DSKD11 Equivalentn5500.01 ～ 10--0.15 ～ 8-3.5 ～ 40.2-10 ～ 35-3.5 ～ 40.2

-

1 Preventivo 10DSKD11 Equivalentn5560.01 ～ 1020 ～ 35-0.15 ～ 88 ～ 45---8 ～ 45-

-

1 Preventivo 10DSKD11 Equivalentn5560.01 ～ 1020 ～ 35-0.15 ～ 88 ～ 45----4 ～ 45.2

-

1 Preventivo 10DSKD11 Equivalentn5560.01 ～ 1020 ～ 35-0.15 ～ 8-4 ～ 45.2--8 ～ 45-

-

1 Preventivo 10DSKD11 Equivalentn5560.01 ～ 1020 ～ 35-0.15 ～ 8-4 ～ 45.2---4 ～ 45.2

-

1 Preventivo 10DSKD11 Equivalentn5560.01 ～ 10-10 ～ 350.15 ～ 88 ～ 45---8 ～ 45-

-

1 Preventivo 10DSKD11 Equivalentn5560.01 ～ 10-10 ～ 350.15 ～ 88 ～ 45----4 ～ 45.2

-

1 Preventivo 10DSKD11 Equivalentn5560.01 ～ 10-10 ～ 350.15 ～ 8-4 ～ 45.2--8 ～ 45-

-

1 Preventivo 10DSKD11 Equivalentn5560.01 ～ 10-10 ～ 350.15 ～ 8-4 ～ 45.2---4 ～ 45.2

-

1 Preventivo 10DSKD11 Equivalentn5560.01 ～ 10--0.15 ～ 88 ～ 45--10 ～ 358 ～ 45-

-

1 Preventivo 10DSKD11 Equivalentn5560.01 ～ 10--0.15 ～ 88 ～ 45--10 ～ 35-4 ～ 45.2

-

1 Preventivo 10DSKD11 Equivalentn5560.01 ～ 10--0.15 ～ 8-4 ～ 45.2-10 ～ 358 ～ 45-

-

1 Preventivo 10DSKD11 Equivalentn5560.01 ～ 10--0.15 ～ 8-4 ～ 45.2-10 ～ 35-4 ～ 45.2

-

1 Preventivo 10DPowdered high-speed steel+0.005/080.01 ～ 1016 ～ 35-0.15 ～ 81 ～ 4---1 ～ 4-

-

1 Preventivo 10DPowdered high-speed steel+0.005/080.01 ～ 1016 ～ 35-0.15 ～ 8-4.01 ～ 4.2--1 ～ 4-

-

1 Preventivo 10DPowdered high-speed steel+0.005/080.01 ～ 10-13 ～ 34.90.15 ～ 81 ～ 4---1 ～ 4-

-

1 Preventivo 10DPowdered high-speed steel+0.005/080.01 ～ 10-13 ～ 34.90.15 ～ 8-4.01 ～ 4.2--1 ～ 4-

-

1 Preventivo 10DPowdered high-speed steel+0.005/080.01 ～ 10--0.15 ～ 81 ～ 4--13 ～ 34.991 ～ 4-

-

1 Preventivo 10DPowdered high-speed steel+0.005/080.01 ～ 10--0.15 ～ 8-4.01 ～ 4.2-13 ～ 34.991 ～ 4-

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 1016 ～ 35-0.15 ～ 81.2 ～ 6---1.2 ～ 6-

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 1016 ～ 35-0.15 ～ 81.2 ～ 6----1 ～ 1.19

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 1016 ～ 35-0.15 ～ 8-1 ～ 1.19--1.2 ～ 6-

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 1016 ～ 35-0.15 ～ 8-1 ～ 1.19---1 ～ 1.19

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 1016 ～ 35-0.15 ～ 8-6.01 ～ 6.2--1.2 ～ 6-

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 1016 ～ 35-0.15 ～ 8-6.01 ～ 6.2---1 ～ 1.19

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 10-13 ～ 34.90.15 ～ 81.2 ～ 6---1.2 ～ 6-

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 10-13 ～ 34.90.15 ～ 81.2 ～ 6----1 ～ 1.19

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 10-13 ～ 34.90.15 ～ 8-1 ～ 1.19--1.2 ～ 6-

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 10-13 ～ 34.90.15 ～ 8-1 ～ 1.19---1 ～ 1.19

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 10-13 ～ 34.90.15 ～ 8-6.01 ～ 6.2--1.2 ～ 6-

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 10-13 ～ 34.90.15 ～ 8-6.01 ～ 6.2---1 ～ 1.19

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 10--0.15 ～ 81.2 ～ 6--13 ～ 34.991.2 ～ 6-

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 10--0.15 ～ 81.2 ～ 6--13 ～ 34.99-1 ～ 1.19

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 10--0.15 ～ 8-1 ～ 1.19-13 ～ 34.991.2 ～ 6-

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 10--0.15 ～ 8-1 ～ 1.19-13 ～ 34.99-1 ～ 1.19

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 10--0.15 ～ 8-6.01 ～ 6.2-13 ～ 34.991.2 ～ 6-

-

1 Preventivo 10DPowdered high-speed steel+0.005/0100.01 ～ 10--0.15 ～ 8-6.01 ～ 6.2-13 ～ 34.99-1 ～ 1.19

-

1 Preventivo 10DPowdered high-speed steel+0.005/0130.01 ～ 1016 ～ 35-0.15 ～ 81.5 ～ 8---1.5 ～ 8-

Loading...

  1. << Indietro
  2. 8
  3. 9
  4. 10
  5. 11
  6. 12
  7. Avanti >>
 

Informazioni di base

Shape Straight Inside shape Economy Scrap retention Yes
Machining to prevent scrap clogging No

Configura

Ripristina

883Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Material

    • SKD11 Equivalent
    • Powdered high-speed steel

    Ripristina

  • Shank diameter D tolerance

    • +0.005/0
    • n5

    Ripristina

  • D (Shank diameter)(mm)

    • 6
    • 8
    • 10
    • 13
    • 16
    • 20
    • 22
    • 25
    • 32
    • 38
    • 45
    • 50
    • 56

    Ripristina

  • C (Clearance)(mm)

     [0.01-10/0.005mmpezzi]

    Ripristina

  • L (L dimension)(mm)

    • 16
    • 20
    • 22
    • 25
    • 28
    • 30
    • 32
    • 35
    • 40

    Ripristina

  • LC (Full length alteration)(mm)

     [10-39.9/0.1mmpezzi]

    Ripristina

  • MT(Workpiece material thickness)(mm)

     [0.15-8/0.01mmpezzi]

    Ripristina

  • P (Tip dimension)(mm)

     [1.9-45/0.01mmpezzi]

    Ripristina

  • PC (Tip dimension alteration)(mm)

     [1-45.2/0.01mmpezzi]

    Ripristina

  • R (Tip corner R)(mm)

     

    Ripristina

  • SLC (Full length alteration tolerance change)(mm)

     [10-39.99/0.01mmpezzi]

    Ripristina

  • W (Tip dimension)(mm)

     [1-45/0.01mmpezzi]

    Ripristina

  • WC (Tip dimension alteration)(mm)

     [1-45.2/0.01mmpezzi]

    Ripristina

  • Tipo

    • SR-EMSD
    • SR-EPMSD
    • SR-EPSDD
    • SR-EPSDE
    • SR-EPSDG
    • SR-EPSDR
    • SR-ESDD
    • SR-ESDE
    • SR-ESDG
    • SR-ESDR
    • SRA-EMSD
    • SRA-EPMSD
    • SRA-EPSDD
    • SRA-EPSDE
    • SRA-EPSDG
    • SRA-EPSDR
    • SRA-ESDD
    • SRA-ESDE
    • SRA-ESDG
    • SRA-ESDR

    Ripristina

  • Tip shape

    • A
    • D
    • R
    • E
    • G

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.