• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Bussole di taglio con collare / slug stop / foro di scarico conico

Bussole di taglio con collare / slug stop / foro di scarico conico

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • FLANGE
  • SKD11
  • POWDER HSS

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Avanti >>
Codice componente
SR-PAHD4-[8,​13,​16,​20,​22,​25,​30]-P[1-1.5/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD4-[8,​13,​16,​20,​22,​25,​30]-PC[1.51-1.7/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD4-LC[10-29.9/0.1]-P[1-1.5/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD4-LC[10-29.9/0.1]-PC[1.51-1.7/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD4-LC[16.01-29.91/0.1]-P[1-1.5/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD4-LC[16.01-29.91/0.1]-PC[1.51-1.7/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD4-LCT[10-30/0.01]-P[1-1.5/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD4-LCT[10-30/0.01]-PC[1.51-1.7/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD4-LMT[10-30/0.01]-P[1-1.5/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD4-LMT[10-30/0.01]-PC[1.51-1.7/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD5-[8,​13,​16,​20,​22,​25,​30]-P[1-2.5/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD5-[8,​13,​16,​20,​22,​25,​30]-PC[2.51-2.7/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD5-LC[10-29.9/0.1]-P[1-2.5/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD5-LC[10-29.9/0.1]-PC[2.51-2.7/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD5-LCT[10-30/0.01]-P[1-2.5/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD5-LCT[10-30/0.01]-PC[2.51-2.7/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD5-LMT[10-30/0.01]-P[1-2.5/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD5-LMT[10-30/0.01]-PC[2.51-2.7/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD6-[16,​20,​22,​25,​30,​35]-P[1-3/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD6-[16,​20,​22,​25,​30,​35]-PC[3.01-3.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD6-LC[10-34.9/0.1]-P[1-3/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD6-LC[10-34.9/0.1]-PC[3.01-3.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD6-LCT[10-35/0.01]-P[1-3/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD6-LCT[10-35/0.01]-PC[3.01-3.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD6-LMT[10-35/0.01]-P[1-3/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD6-LMT[10-35/0.01]-PC[3.01-3.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD8-[16,​20,​22,​25,​30,​35]-P[1-4/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD8-[16,​20,​22,​25,​30,​35]-PC[4.01-4.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD8-LC[10-34.9/0.1]-P[1-4/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD8-LC[10-34.9/0.1]-PC[4.01-4.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD8-LCT[10-35/0.01]-P[1-4/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD8-LCT[10-35/0.01]-PC[4.01-4.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD8-LMT[10-35/0.01]-P[1-4/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD8-LMT[10-35/0.01]-PC[4.01-4.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD10-[16,​20,​22,​25,​30,​35]-P[2-6/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD10-[16,​20,​22,​25,​30,​35]-PC[1-1.99/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD10-[16,​20,​22,​25,​30,​35]-PC[6.01-6.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD10-LC[10-34.9/0.1]-P[2-6/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD10-LC[10-34.9/0.1]-PC[1-1.99/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD10-LC[10-34.9/0.1]-PC[6.01-6.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD10-LCT[10-35/0.01]-P[2-6/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD10-LCT[10-35/0.01]-PC[1-1.99/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD10-LCT[10-35/0.01]-PC[6.01-6.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD10-LMT[10-35/0.01]-P[2-6/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD10-LMT[10-35/0.01]-PC[1-1.99/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD10-LMT[10-35/0.01]-PC[6.01-6.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD13-[16,​20,​22,​25,​30,​35]-P[3-8/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD13-[16,​20,​22,​25,​30,​35]-PC[1.5-2.99/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD13-[16,​20,​22,​25,​30,​35]-PC[8.01-8.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD13-LC[10-34.9/0.1]-P[3-8/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD13-LC[10-34.9/0.1]-PC[1.5-2.99/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD13-LC[10-34.9/0.1]-PC[8.01-8.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD13-LCT[10-35/0.01]-P[3-8/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD13-LCT[10-35/0.01]-PC[1.5-2.99/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD13-LCT[10-35/0.01]-PC[8.01-8.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD13-LMT[10-35/0.01]-P[3-8/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD13-LMT[10-35/0.01]-PC[1.5-2.99/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD13-LMT[10-35/0.01]-PC[8.01-8.2/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD16-[16,​20,​22,​25,​30,​35]-P[5-10/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SR-PAHD16-[16,​20,​22,​25,​30,​35]-PC[2.5-4.99/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape Material Shank diameter D tolerance D (Shank diameter)
(mm) 		C (Clearance)
(mm) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		LCT (Head thickness/L dimension tolerance change and L dimension change)
(mm) 		LMT (Head thickness/L dimension tolerance change and L dimension change)
(mm) 		MT(Workpiece material thickness)
(mm) 		P (Tip dimension)
(mm) 		PC (Tip dimension alteration)
(mm) 		R (Tip corner R)
(mm) 		W (Tip dimension)
(mm) 		WC (Tip dimension alteration)
(mm)

-

1 Preventivo 10APowdered high-speed steelm540.01 ～ 108 ～ 30---0.15 ～ 81 ～ 1.5----

-

1 Preventivo 10APowdered high-speed steelm540.01 ～ 108 ～ 30---0.15 ～ 8-1.51 ～ 1.7---

-

1 Preventivo 10APowdered high-speed steelm540.01 ～ 10-10 ～ 29.9--0.15 ～ 81 ～ 1.5----

-

1 Preventivo 10APowdered high-speed steelm540.01 ～ 10-10 ～ 29.9--0.15 ～ 8-1.51 ～ 1.7---

-

1 Preventivo 10APowdered high-speed steelm540.01 ～ 10-16.01 ～ 29.91--0.15 ～ 81 ～ 1.5----

-

1 Preventivo 10APowdered high-speed steelm540.01 ～ 10-16.01 ～ 29.91--0.15 ～ 8-1.51 ～ 1.7---

-

1 Preventivo 10APowdered high-speed steelm540.01 ～ 10--10 ～ 30-0.15 ～ 81 ～ 1.5----

-

1 Preventivo 10APowdered high-speed steelm540.01 ～ 10--10 ～ 30-0.15 ～ 8-1.51 ～ 1.7---

-

1 Preventivo 10APowdered high-speed steelm540.01 ～ 10---10 ～ 300.15 ～ 81 ～ 1.5----

-

1 Preventivo 10APowdered high-speed steelm540.01 ～ 10---10 ～ 300.15 ～ 8-1.51 ～ 1.7---

-

1 Preventivo 10APowdered high-speed steelm550.01 ～ 108 ～ 30---0.15 ～ 81 ～ 2.5----

-

1 Preventivo 10APowdered high-speed steelm550.01 ～ 108 ～ 30---0.15 ～ 8-2.51 ～ 2.7---

-

1 Preventivo 10APowdered high-speed steelm550.01 ～ 10-10 ～ 29.9--0.15 ～ 81 ～ 2.5----

-

1 Preventivo 10APowdered high-speed steelm550.01 ～ 10-10 ～ 29.9--0.15 ～ 8-2.51 ～ 2.7---

-

1 Preventivo 10APowdered high-speed steelm550.01 ～ 10--10 ～ 30-0.15 ～ 81 ～ 2.5----

-

1 Preventivo 10APowdered high-speed steelm550.01 ～ 10--10 ～ 30-0.15 ～ 8-2.51 ～ 2.7---

-

1 Preventivo 10APowdered high-speed steelm550.01 ～ 10---10 ～ 300.15 ～ 81 ～ 2.5----

-

1 Preventivo 10APowdered high-speed steelm550.01 ～ 10---10 ～ 300.15 ～ 8-2.51 ～ 2.7---

-

1 Preventivo 10APowdered high-speed steelm560.01 ～ 1016 ～ 35---0.15 ～ 81 ～ 3----

-

1 Preventivo 10APowdered high-speed steelm560.01 ～ 1016 ～ 35---0.15 ～ 8-3.01 ～ 3.2---

-

1 Preventivo 10APowdered high-speed steelm560.01 ～ 10-10 ～ 34.9--0.15 ～ 81 ～ 3----

-

1 Preventivo 10APowdered high-speed steelm560.01 ～ 10-10 ～ 34.9--0.15 ～ 8-3.01 ～ 3.2---

-

1 Preventivo 10APowdered high-speed steelm560.01 ～ 10--10 ～ 35-0.15 ～ 81 ～ 3----

-

1 Preventivo 10APowdered high-speed steelm560.01 ～ 10--10 ～ 35-0.15 ～ 8-3.01 ～ 3.2---

-

1 Preventivo 10APowdered high-speed steelm560.01 ～ 10---10 ～ 350.15 ～ 81 ～ 3----

-

1 Preventivo 10APowdered high-speed steelm560.01 ～ 10---10 ～ 350.15 ～ 8-3.01 ～ 3.2---

-

1 Preventivo 10APowdered high-speed steelm580.01 ～ 1016 ～ 35---0.15 ～ 81 ～ 4----

-

1 Preventivo 10APowdered high-speed steelm580.01 ～ 1016 ～ 35---0.15 ～ 8-4.01 ～ 4.2---

-

1 Preventivo 10APowdered high-speed steelm580.01 ～ 10-10 ～ 34.9--0.15 ～ 81 ～ 4----

-

1 Preventivo 10APowdered high-speed steelm580.01 ～ 10-10 ～ 34.9--0.15 ～ 8-4.01 ～ 4.2---

-

1 Preventivo 10APowdered high-speed steelm580.01 ～ 10--10 ～ 35-0.15 ～ 81 ～ 4----

-

1 Preventivo 10APowdered high-speed steelm580.01 ～ 10--10 ～ 35-0.15 ～ 8-4.01 ～ 4.2---

-

1 Preventivo 10APowdered high-speed steelm580.01 ～ 10---10 ～ 350.15 ～ 81 ～ 4----

-

1 Preventivo 10APowdered high-speed steelm580.01 ～ 10---10 ～ 350.15 ～ 8-4.01 ～ 4.2---

-

1 Preventivo 10APowdered high-speed steelm5100.01 ～ 1016 ～ 35---0.15 ～ 82 ～ 6----

-

1 Preventivo 10APowdered high-speed steelm5100.01 ～ 1016 ～ 35---0.15 ～ 8-1 ～ 1.99---

-

1 Preventivo 10APowdered high-speed steelm5100.01 ～ 1016 ～ 35---0.15 ～ 8-6.01 ～ 6.2---

-

1 Preventivo 10APowdered high-speed steelm5100.01 ～ 10-10 ～ 34.9--0.15 ～ 82 ～ 6----

-

1 Preventivo 10APowdered high-speed steelm5100.01 ～ 10-10 ～ 34.9--0.15 ～ 8-1 ～ 1.99---

-

1 Preventivo 10APowdered high-speed steelm5100.01 ～ 10-10 ～ 34.9--0.15 ～ 8-6.01 ～ 6.2---

-

1 Preventivo 10APowdered high-speed steelm5100.01 ～ 10--10 ～ 35-0.15 ～ 82 ～ 6----

-

1 Preventivo 10APowdered high-speed steelm5100.01 ～ 10--10 ～ 35-0.15 ～ 8-1 ～ 1.99---

-

1 Preventivo 10APowdered high-speed steelm5100.01 ～ 10--10 ～ 35-0.15 ～ 8-6.01 ～ 6.2---

-

1 Preventivo 10APowdered high-speed steelm5100.01 ～ 10---10 ～ 350.15 ～ 82 ～ 6----

-

1 Preventivo 10APowdered high-speed steelm5100.01 ～ 10---10 ～ 350.15 ～ 8-1 ～ 1.99---

-

1 Preventivo 10APowdered high-speed steelm5100.01 ～ 10---10 ～ 350.15 ～ 8-6.01 ～ 6.2---

-

1 Preventivo 10APowdered high-speed steelm5130.01 ～ 1016 ～ 35---0.15 ～ 83 ～ 8----

-

1 Preventivo 10APowdered high-speed steelm5130.01 ～ 1016 ～ 35---0.15 ～ 8-1.5 ～ 2.99---

-

1 Preventivo 10APowdered high-speed steelm5130.01 ～ 1016 ～ 35---0.15 ～ 8-8.01 ～ 8.2---

-

1 Preventivo 10APowdered high-speed steelm5130.01 ～ 10-10 ～ 34.9--0.15 ～ 83 ～ 8----

-

1 Preventivo 10APowdered high-speed steelm5130.01 ～ 10-10 ～ 34.9--0.15 ～ 8-1.5 ～ 2.99---

-

1 Preventivo 10APowdered high-speed steelm5130.01 ～ 10-10 ～ 34.9--0.15 ～ 8-8.01 ～ 8.2---

-

1 Preventivo 10APowdered high-speed steelm5130.01 ～ 10--10 ～ 35-0.15 ～ 83 ～ 8----

-

1 Preventivo 10APowdered high-speed steelm5130.01 ～ 10--10 ～ 35-0.15 ～ 8-1.5 ～ 2.99---

-

1 Preventivo 10APowdered high-speed steelm5130.01 ～ 10--10 ～ 35-0.15 ～ 8-8.01 ～ 8.2---

-

1 Preventivo 10APowdered high-speed steelm5130.01 ～ 10---10 ～ 350.15 ～ 83 ～ 8----

-

1 Preventivo 10APowdered high-speed steelm5130.01 ～ 10---10 ～ 350.15 ～ 8-1.5 ～ 2.99---

-

1 Preventivo 10APowdered high-speed steelm5130.01 ～ 10---10 ～ 350.15 ～ 8-8.01 ～ 8.2---

-

1 Preventivo 10APowdered high-speed steelm5160.01 ～ 1016 ～ 35---0.15 ～ 85 ～ 10----

-

1 Preventivo 10APowdered high-speed steelm5160.01 ～ 1016 ～ 35---0.15 ～ 8-2.5 ～ 4.99---

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Avanti >>
 

Informazioni di base

Shape Headed type Inside shape Angular Scrap retention Yes
Machining to prevent scrap clogging No

Configura

Ripristina

1,923Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Tip shape

    • A
    • D
    • R
    • E
    • G

    Ripristina

  • Shank diameter D tolerance

    • +0.005/0
    • m5

    Ripristina

  • D (Shank diameter)(mm)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 13
    • 16
    • 20
    • 25

    Ripristina

  • C (Clearance)(mm)

     [0.01-10/0.005mmpezzi]

    Ripristina

  • L (L dimension)(mm)

    • 8
    • 13
    • 16
    • 20
    • 22
    • 25
    • 30
    • 35
    • 40

    Ripristina

  • LC (Full length alteration)(mm)

     [10-34.9/0.1mmpezzi]

    Ripristina

  • LCT (Head thickness/L dimension tolerance change and L dimension change)(mm)

     [10-35/0.01mmpezzi]

    Ripristina

  • LMT (Head thickness/L dimension tolerance change and L dimension change)(mm)

     [10-35/0.01mmpezzi]

    Ripristina

  • MT(Workpiece material thickness)(mm)

     [0.15-8/0.01mmpezzi]

    Ripristina

  • P (Tip dimension)(mm)

     [1-16/0.01mmpezzi]

    Ripristina

  • PC (Tip dimension alteration)(mm)

     [0.95-10.2/0.01mmpezzi][12.01-12.2/0.01mmpezzi][16.01-16.2/0.01mmpezzi]

    Ripristina

  • R (Tip corner R)(mm)

     [0.15-7.99/0.01mmpezzi]

    Ripristina

  • W (Tip dimension)(mm)

     [1-16/0.01mmpezzi]

    Ripristina

  • WC (Tip dimension alteration)(mm)

     [1-2.99/0.01mmpezzi][3.01-3.2/0.01mmpezzi][4.01-4.2/0.01mmpezzi][6.01-6.2/0.01mmpezzi][8.01-8.2/0.01mmpezzi][10.01-10.2/0.01mmpezzi][12.01-12.2/0.01mmpezzi][16.01-16.2/0.01mmpezzi]

    Ripristina

  • Tipo

    • SR-AHD
    • SR-AHDD
    • SR-AHDE
    • SR-AHDG
    • SR-AHDR
    • SR-PAHD
    • SR-PAHDD
    • SR-PAHDE
    • SR-PAHDG
    • SR-PAHDR
    • SRA-AHD
    • SRA-AHDD
    • SRA-AHDE
    • SRA-AHDG
    • SRA-AHDR
    • SRA-PAHD
    • SRA-PAHDD
    • SRA-PAHDE
    • SRA-PAHDG
    • SRA-PAHDR

    Ripristina

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.