• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni per il taglio delle forme

Punzoni per il taglio delle forme

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme

MISUMI

MISUMI

  • SKH51
  • SKD11
  • POWDER HSS

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
PHFCD-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-F[0-90/90]
PHFCD-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-F[0-90/90]
PHFCE-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-F0
PHFCE-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-F0
PHFCG-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-F0
PHFCG-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-F0
PHFCR-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-F[0-270/90]
PHFCR-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-F[0-270/90]
PHKCD-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
PHKCD-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
PHKCE-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
PHKCE-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
PHKCG-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
PHKCG-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
PHKCR-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-T[2-100/0.1]-K[0,​90]
PHKCR-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-T[2-100/0.1]-K[0,​90]
PHMCD-[40-100/10]-P[4-30/0.01]-W[4-30/0.01]
PHMCD-LC[30-99.9/0.1]-P[4-30/0.01]-W[4-30/0.01]
PHMCE-[40-100/10]-P[4-30/0.01]-W[4-30/0.01]
PHMCE-LC[30-99.9/0.1]-P[4-30/0.01]-W[4-30/0.01]
PHMCG-[40-100/10]-P[4-30/0.01]-W[4-30/0.01]
PHMCG-LC[30-99.9/0.1]-P[4-30/0.01]-W[4-30/0.01]
PHMCR-[40-100/10]-P[4-30/0.01]-W[4-30/0.01]-R[0.15-15/0.01]
PHMCR-LC[30-99.9/0.1]-P[4-30/0.01]-W[4-30/0.01]-R[0.15-15/0.01]
PHPCD-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]
PHPCD-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]
PHPCE-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]
PHPCE-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]
PHPCG-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]
PHPCG-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]
PHPCR-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]
PHPCR-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]
PHWCD-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-WF[0-360/90]
PHWCD-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-WF[0-360/90]
PHWCE-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-WF0
PHWCE-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-WF0
PHWCG-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-WF0
PHWCG-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-WF0
PHWCR-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-WF[0-360/90]
PHWCR-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-WF[0-360/90]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape Material Shank (mounting part) shape F (Flange position designation)
(°) 		K (Key groove position designation)
(°) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		P (Tip dimension)
(mm) 		R (Tip corner R)
(mm) 		T (Key groove position)
(mm) 		W (Tip dimension)
(mm) 		WF (Flange position designation)
(°)
1 Preventivo 10DPowdered high-speed steelSingle-flanged0 ～ 90-40 ～ 100-3 ～ 30--2 ～ 30-
1 Preventivo 10DPowdered high-speed steelSingle-flanged0 ～ 90--20 ～ 99.93 ～ 30--2 ～ 30-
1 Preventivo 10EPowdered high-speed steelSingle-flanged0-40 ～ 100-3 ～ 30--2 ～ 30-
1 Preventivo 10EPowdered high-speed steelSingle-flanged0--20 ～ 99.93 ～ 30--2 ～ 30-
1 Preventivo 10GPowdered high-speed steelSingle-flanged0-40 ～ 100-3 ～ 30--2 ～ 30-
1 Preventivo 10GPowdered high-speed steelSingle-flanged0--20 ～ 99.93 ～ 30--2 ～ 30-
1 Preventivo 10RPowdered high-speed steelSingle-flanged0 ～ 270-40 ～ 100-3 ～ 300.15 ～ 15-2 ～ 30-
1 Preventivo 10RPowdered high-speed steelSingle-flanged0 ～ 270--20 ～ 99.93 ～ 300.15 ～ 15-2 ～ 30-
1 Preventivo 10DPowdered high-speed steelWith key groove-0 ～ 9040 ～ 100-2 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10DPowdered high-speed steelWith key groove-0 ～ 90-20 ～ 99.92 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10EPowdered high-speed steelWith key groove-0 ～ 9040 ～ 100-2 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10EPowdered high-speed steelWith key groove-0 ～ 90-20 ～ 99.92 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10GPowdered high-speed steelWith key groove-0 ～ 9040 ～ 100-2 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10GPowdered high-speed steelWith key groove-0 ～ 90-20 ～ 99.92 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10RPowdered high-speed steelWith key groove-0 ～ 9040 ～ 100-2 ～ 300.15 ～ 152 ～ 1002 ～ 30-
1 Preventivo 10RPowdered high-speed steelWith key groove-0 ～ 90-20 ～ 99.92 ～ 300.15 ～ 152 ～ 1002 ～ 30-
1 Preventivo 10DPowdered high-speed steelTapped--40 ～ 100-4 ～ 30--4 ～ 30-
1 Preventivo 10DPowdered high-speed steelTapped---30 ～ 99.94 ～ 30--4 ～ 30-
1 Preventivo 10EPowdered high-speed steelTapped--40 ～ 100-4 ～ 30--4 ～ 30-
1 Preventivo 10EPowdered high-speed steelTapped---30 ～ 99.94 ～ 30--4 ～ 30-
1 Preventivo 10GPowdered high-speed steelTapped--40 ～ 100-4 ～ 30--4 ～ 30-
1 Preventivo 10GPowdered high-speed steelTapped---30 ～ 99.94 ～ 30--4 ～ 30-
1 Preventivo 10RPowdered high-speed steelTapped--40 ～ 100-4 ～ 300.15 ～ 15-4 ～ 30-
1 Preventivo 10RPowdered high-speed steelTapped---30 ～ 99.94 ～ 300.15 ～ 15-4 ～ 30-
1 Preventivo 10DPowdered high-speed steelStandard--40 ～ 100-2 ～ 30--2 ～ 30-
1 Preventivo 10DPowdered high-speed steelStandard---20 ～ 99.92 ～ 30--2 ～ 30-
1 Preventivo 10EPowdered high-speed steelStandard--40 ～ 100-2 ～ 30--2 ～ 30-
1 Preventivo 10EPowdered high-speed steelStandard---20 ～ 99.92 ～ 30--2 ～ 30-
1 Preventivo 10GPowdered high-speed steelStandard--40 ～ 100-2 ～ 30--2 ～ 30-
1 Preventivo 10GPowdered high-speed steelStandard---20 ～ 99.92 ～ 30--2 ～ 30-
1 Preventivo 10RPowdered high-speed steelStandard--40 ～ 100-2 ～ 300.15 ～ 15-2 ～ 30-
1 Preventivo 10RPowdered high-speed steelStandard---20 ～ 99.92 ～ 300.15 ～ 15-2 ～ 30-
1 Preventivo 10DPowdered high-speed steelDouble-flanged--40 ～ 100-3 ～ 30--2 ～ 300 ～ 360
1 Preventivo 10DPowdered high-speed steelDouble-flanged---20 ～ 99.93 ～ 30--2 ～ 300 ～ 360
1 Preventivo 10EPowdered high-speed steelDouble-flanged--40 ～ 100-3 ～ 30--2 ～ 300
1 Preventivo 10EPowdered high-speed steelDouble-flanged---20 ～ 99.93 ～ 30--2 ～ 300
1 Preventivo 10GPowdered high-speed steelDouble-flanged--40 ～ 100-3 ～ 30--2 ～ 300
1 Preventivo 10GPowdered high-speed steelDouble-flanged---20 ～ 99.93 ～ 30--2 ～ 300
1 Preventivo 10RPowdered high-speed steelDouble-flanged--40 ～ 100-3 ～ 300.15 ～ 15-2 ～ 300 ～ 360
1 Preventivo 10RPowdered high-speed steelDouble-flanged---20 ～ 99.93 ～ 300.15 ～ 15-2 ～ 300 ～ 360

Loading...

  1. 1
 

Informazioni di base

Shank type Straight With/without jector W/O Surface treatment None

Configura

Ripristina

40Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Tip shape

    • D
    • R
    • E
    • G

    Ripristina

  • Shank (mounting part) shape

    • Standard
    • Tapped
    • With key groove
    • Single-flanged
    • Double-flanged

    Ripristina

  • F (Flange position designation)(°)

    • 0
    • 90

     [0-270/90°pezzi]

    Ripristina

  • K (Key groove position designation)(°)

    • 0
    • 90

    Ripristina

  • L (L dimension)(mm)

     [40-100/10mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

     [20-99.9/0.1mmpezzi]

    Ripristina

  • P (Tip dimension)(mm)

     [2-30/0.01mmpezzi]

    Ripristina

  • R (Tip corner R)(mm)

     [0.15-15/0.01mmpezzi]

    Ripristina

  • T (Key groove position)(mm)

     [2-100/0.1mmpezzi]

    Ripristina

  • W (Tip dimension)(mm)

     [2-30/0.01mmpezzi]

    Ripristina

  • WF (Flange position designation)(°)

    • 0
    • 90

     [0-360/90°pezzi]

    Ripristina

  • Tipo

    • HFCD
    • HFCE
    • HFCG
    • HFCR
    • HKCD
    • HKCE
    • HKCG
    • HKCR
    • HMCD
    • HMCE
    • HMCG
    • HMCR
    • HPCD
    • HPCE
    • HPCG
    • HPCR
    • HSFCD
    • HSFCE
    • HSFCG
    • HSFCR
    • HSKCD
    • HSKCE
    • HSKCG
    • HSKCR
    • HSMCD
    • HSMCE
    • HSMCG
    • HSMCR
    • HSPCD
    • HSPCE
    • HSPCG
    • HSPCR
    • HSWCD
    • HSWCE
    • HSWCG
    • HSWCR
    • HWCD
    • HWCE
    • HWCG
    • HWCR
    • PHFCD
    • PHFCE
    • PHFCG
    • PHFCR
    • PHKCD
    • PHKCE
    • PHKCG
    • PHKCR
    • PHMCD
    • PHMCE
    • PHMCG
    • PHMCR
    • PHPCD
    • PHPCE
    • PHPCG
    • PHPCR
    • PHWCD
    • PHWCE
    • PHWCG
    • PHWCR

    Ripristina

  • Material

    • SKH51 Equivalent
    • Powdered high-speed steel
    • SKH51 or SKD11 Equivalent

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.