• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni per il taglio delle forme

Punzoni per il taglio delle forme

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme

MISUMI

MISUMI

  • SKH51
  • SKD11
  • POWDER HSS

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
HFCD-[40-100/10]-P[3-50/0.01]-W[2-30/0.01]-F[0-90/90]
HFCD-LC[20-99.9/0.1]-P[3-50/0.01]-W[2-30/0.01]-F[0-90/90]
HFCE-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-F0
HFCE-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-F0
HFCG-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-F0
HFCG-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-F0
HFCR-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-F[0-270/90]
HFCR-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-F[0-270/90]
HKCD-[40-100/10]-P[2-50/0.01]-W[2-30/0.01]-K[0,​90]-T[2-100/0.1]
HKCD-LC[20-99.9/0.1]-P[2-50/0.01]-W[2-30/0.01]-K[0,​90]-T[2-100/0.1]
HKCE-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
HKCE-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
HKCG-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
HKCG-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
HKCR-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-T[2-100/0.1]-K[0,​90]
HKCR-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-T[2-100/0.1]-K[0,​90]
HMCD-[40-100/10]-P[4-50/0.01]-W[4-30/0.01]
HMCD-LC[30-99.9/0.1]-P[4-50/0.01]-W[4-30/0.01]
HMCE-[40-100/10]-P[4-30/0.01]-W[4-30/0.01]
HMCE-LC[30-99.9/0.1]-P[4-30/0.01]-W[4-30/0.01]
HMCG-[40-100/10]-P[4-30/0.01]-W[4-30/0.01]
HMCG-LC[30-99.9/0.1]-P[4-30/0.01]-W[4-30/0.01]
HMCR-[40-100/10]-P[4-30/0.01]-W[4-30/0.01]-R[0.15-15/0.01]
HMCR-LC[30-99.9/0.1]-P[4-30/0.01]-W[4-30/0.01]-R[0.15-15/0.01]
HPCD-[40-100/10]-P[2-50/0.01]-W[2-30/0.01]
HPCD-LC[20-99.9/0.1]-P[2-50/0.01]-W[2-30/0.01]
HPCE-[40-100/10]-P[2-50/0.01]-W[2-30/0.01]
HPCE-LC[20-99.9/0.1]-P[2-50/0.01]-W[2-30/0.01]
HPCG-[40-100/10]-P[2-50/0.01]-W[2-30/0.01]
HPCG-LC[20-99.9/0.1]-P[2-50/0.01]-W[2-30/0.01]
HPCR-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]
HPCR-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]
HWCD-[40-100/10]-P[3-50/0.01]-W[2-30/0.01]-WF[0-360/90]
HWCD-LC[20-99.9/0.1]-P[3-50/0.01]-W[2-30/0.01]-WF[0-360/90]
HWCE-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-WF0
HWCE-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-WF0
HWCG-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-WF0
HWCG-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-WF0
HWCR-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-WF[0-360/90]
HWCR-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-WF[0-360/90]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape Material Shank (mounting part) shape F (Flange position designation)
(°) 		K (Key groove position designation)
(°) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		P (Tip dimension)
(mm) 		R (Tip corner R)
(mm) 		T (Key groove position)
(mm) 		W (Tip dimension)
(mm) 		WF (Flange position designation)
(°)
1 Preventivo 10DSKH51 or SKD11 EquivalentSingle-flanged0 ～ 90-40 ～ 100-3 ～ 50--2 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentSingle-flanged0 ～ 90--20 ～ 99.93 ～ 50--2 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentSingle-flanged0-40 ～ 100-3 ～ 30--2 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentSingle-flanged0--20 ～ 99.93 ～ 30--2 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentSingle-flanged0-40 ～ 100-3 ～ 30--2 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentSingle-flanged0--20 ～ 99.93 ～ 30--2 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentSingle-flanged0 ～ 270-40 ～ 100-3 ～ 300.15 ～ 15-2 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentSingle-flanged0 ～ 270--20 ～ 99.93 ～ 300.15 ～ 15-2 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentWith key groove-0 ～ 9040 ～ 100-2 ～ 50-2 ～ 1002 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentWith key groove-0 ～ 90-20 ～ 99.92 ～ 50-2 ～ 1002 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentWith key groove-0 ～ 9040 ～ 100-2 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentWith key groove-0 ～ 90-20 ～ 99.92 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentWith key groove-0 ～ 9040 ～ 100-2 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentWith key groove-0 ～ 90-20 ～ 99.92 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentWith key groove-0 ～ 9040 ～ 100-2 ～ 300.15 ～ 152 ～ 1002 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentWith key groove-0 ～ 90-20 ～ 99.92 ～ 300.15 ～ 152 ～ 1002 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentTapped--40 ～ 100-4 ～ 50--4 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentTapped---30 ～ 99.94 ～ 50--4 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentTapped--40 ～ 100-4 ～ 30--4 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentTapped---30 ～ 99.94 ～ 30--4 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentTapped--40 ～ 100-4 ～ 30--4 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentTapped---30 ～ 99.94 ～ 30--4 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentTapped--40 ～ 100-4 ～ 300.15 ～ 15-4 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentTapped---30 ～ 99.94 ～ 300.15 ～ 15-4 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentStandard--40 ～ 100-2 ～ 50--2 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentStandard---20 ～ 99.92 ～ 50--2 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentStandard--40 ～ 100-2 ～ 50--2 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentStandard---20 ～ 99.92 ～ 50--2 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentStandard--40 ～ 100-2 ～ 50--2 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentStandard---20 ～ 99.92 ～ 50--2 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentStandard--40 ～ 100-2 ～ 300.15 ～ 15-2 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentStandard---20 ～ 99.92 ～ 300.15 ～ 15-2 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentDouble-flanged--40 ～ 100-3 ～ 50--2 ～ 300 ～ 360
1 Preventivo 10DSKH51 or SKD11 EquivalentDouble-flanged---20 ～ 99.93 ～ 50--2 ～ 300 ～ 360
1 Preventivo 10ESKH51 or SKD11 EquivalentDouble-flanged--40 ～ 100-3 ～ 30--2 ～ 300
1 Preventivo 10ESKH51 or SKD11 EquivalentDouble-flanged---20 ～ 99.93 ～ 30--2 ～ 300
1 Preventivo 10GSKH51 or SKD11 EquivalentDouble-flanged--40 ～ 100-3 ～ 30--2 ～ 300
1 Preventivo 10GSKH51 or SKD11 EquivalentDouble-flanged---20 ～ 99.93 ～ 30--2 ～ 300
1 Preventivo 10RSKH51 or SKD11 EquivalentDouble-flanged--40 ～ 100-3 ～ 300.15 ～ 15-2 ～ 300 ～ 360
1 Preventivo 10RSKH51 or SKD11 EquivalentDouble-flanged---20 ～ 99.93 ～ 300.15 ～ 15-2 ～ 300 ～ 360

Loading...

  1. 1
 

Informazioni di base

Shank type Straight With/without jector W/O Surface treatment None

Configura

Ripristina

40Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Tip shape

    • D
    • R
    • E
    • G

    Ripristina

  • Shank (mounting part) shape

    • Standard
    • Tapped
    • With key groove
    • Single-flanged
    • Double-flanged

    Ripristina

  • F (Flange position designation)(°)

    • 0
    • 90

     [0-270/90°pezzi]

    Ripristina

  • K (Key groove position designation)(°)

    • 0
    • 90

    Ripristina

  • L (L dimension)(mm)

     [40-100/10mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

     [20-99.9/0.1mmpezzi]

    Ripristina

  • P (Tip dimension)(mm)

     [2-50/0.01mmpezzi]

    Ripristina

  • R (Tip corner R)(mm)

     [0.15-15/0.01mmpezzi]

    Ripristina

  • T (Key groove position)(mm)

     [2-100/0.1mmpezzi]

    Ripristina

  • W (Tip dimension)(mm)

     [2-30/0.01mmpezzi]

    Ripristina

  • WF (Flange position designation)(°)

    • 0
    • 90

     [0-360/90°pezzi]

    Ripristina

  • Tipo

    • HFCD
    • HFCE
    • HFCG
    • HFCR
    • HKCD
    • HKCE
    • HKCG
    • HKCR
    • HMCD
    • HMCE
    • HMCG
    • HMCR
    • HPCD
    • HPCE
    • HPCG
    • HPCR
    • HSFCD
    • HSFCE
    • HSFCG
    • HSFCR
    • HSKCD
    • HSKCE
    • HSKCG
    • HSKCR
    • HSMCD
    • HSMCE
    • HSMCG
    • HSMCR
    • HSPCD
    • HSPCE
    • HSPCG
    • HSPCR
    • HSWCD
    • HSWCE
    • HSWCG
    • HSWCR
    • HWCD
    • HWCE
    • HWCG
    • HWCR
    • PHFCD
    • PHFCE
    • PHFCG
    • PHFCR
    • PHKCD
    • PHKCE
    • PHKCG
    • PHKCR
    • PHMCD
    • PHMCE
    • PHMCG
    • PHMCR
    • PHPCD
    • PHPCE
    • PHPCG
    • PHPCR
    • PHWCD
    • PHWCE
    • PHWCG
    • PHWCR

    Ripristina

  • Material

    • SKH51 Equivalent
    • Powdered high-speed steel
    • SKH51 or SKD11 Equivalent

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.