• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni di trafilatura / perno rompi tallone / lappato

Punzoni di trafilatura / perno rompi tallone / lappato

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • SKD11
  • POWDER HSS

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. 3
  4. Avanti >>
Codice componente
L-PJ6B4-[40-80/10]-P[2-4/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B4-LC[38-78.9/0.1]-P[2-4/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B5-[40-80/10]-P[2-5/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B5-LC[38-78.9/0.1]-P[2-5/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B6-[40-80/10]-P[2-6/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B6-LC[38-78.9/0.1]-P[2-6/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B8-[40-100/10]-P[3-8/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B8-LC[38-98.9/0.1]-P[3-8/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B10-[40-100/10]-P[3-10/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B10-LC[38-98.9/0.1]-P[3-10/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B13-[40-100/10]-P[6-13/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B13-LC[38-98.9/0.1]-P[6-13/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B16-[40-100/10]-P[10-16/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B16-LC[38-98.9/0.1]-P[10-16/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B20-[40-100/10]-P[13-20/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B20-LC[38-98.9/0.1]-P[13-20/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B25-[40-100/10]-P[18-25/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-PJ6B25-LC[38-98.9/0.1]-P[18-25/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-SJ6B4-[40-80/10]-P[2-4/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B4-LC[34-39.9/0.1]-P[2-4/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B4-LC[44-49.9/0.1]-P[2-4/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B4-LC[54-59.9/0.1]-P[2-4/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B4-LC[64-69.9/0.1]-P[2-4/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B4-LC[74-79.9/0.1]-P[2-4/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B5-[40-80/10]-P[2-5/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B5-LC[34-39.9/0.1]-P[2-5/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B5-LC[44-49.9/0.1]-P[2-5/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B5-LC[54-59.9/0.1]-P[2-5/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B5-LC[64-69.9/0.1]-P[2-5/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B5-LC[74-79.9/0.1]-P[2-5/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B6-[40-80/10]-P[2-6/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B6-LC[34-39.9/0.1]-P[2-6/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B6-LC[44-49.9/0.1]-P[2-6/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B6-LC[54-59.9/0.1]-P[2-6/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B6-LC[64-69.9/0.1]-P[2-6/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B6-LC[74-79.9/0.1]-P[2-6/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B8-[40-100/10]-P[3-8/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B8-LC[38-98.9/0.1]-P[3-8/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B10-[40-100/10]-P[3-10/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B10-LC[38-98.9/0.1]-P[3-10/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B13-[40-100/10]-P[6-13/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B13-LC[38-98.9/0.1]-P[6-13/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B16-[40-100/10]-P[10-16/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B16-LC[38-98.9/0.1]-P[10-16/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B20-[40-100/10]-P[13-20/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B20-LC[38-98.9/0.1]-P[13-20/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B25-[40-100/10]-P[18-25/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ6B25-LC[38-98.9/0.1]-P[18-25/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
L-SJ-C6B10-[60-100/10]-P[3-10/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-SJ-C6B10-LC[38-98.9/0.1]-P[3-10/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-SJ-C6B13-[60-100/10]-P[6-13/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-SJ-C6B13-LC[38-98.9/0.1]-P[6-13/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-SJ-C6B16-[60-100/10]-P[10-16/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-SJ-C6B16-LC[38-98.9/0.1]-P[10-16/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-SJ-C6B20-[60-100/10]-P[13-20/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-SJ-C6B20-LC[38-98.9/0.1]-P[13-20/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-SJ-C6B25-[60-100/10]-P[18-25/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
L-SJ-C6B25-LC[38-98.9/0.1]-P[18-25/0.01]-R[0.5-15/0.1]-S[2-14.9/0.1]
PJ6B4-[40-80/10]-P[2-4/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
PJ6B4-LC[38-78.9/0.1]-P[2-4/0.01]-R[0.1-15/0.1]-S[2-14.9/0.1]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape Material Surface treatment Shank (mounting part) shape D (Shank diameter)
(mm) 		A
(°) 		E
(mm) 		F
(mm) 		K
(°) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		P
(mm) 		Q
(mm) 		R
(mm) 		S
(mm) 		V
(mm)
1 Preventivo 106BPowdered high-speed steelLappingRegular4----40 ～ 80-2 ～ 4-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular4-----38 ～ 78.92 ～ 4-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular5----40 ～ 80-2 ～ 5-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular5-----38 ～ 78.92 ～ 5-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular6----40 ～ 80-2 ～ 6-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular6-----38 ～ 78.92 ～ 6-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular8----40 ～ 100-3 ～ 8-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular8-----38 ～ 98.93 ～ 8-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular10----40 ～ 100-3 ～ 10-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular10-----38 ～ 98.93 ～ 10-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular13----40 ～ 100-6 ～ 13-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular13-----38 ～ 98.96 ～ 13-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular16----40 ～ 100-10 ～ 16-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular16-----38 ～ 98.910 ～ 16-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular20----40 ～ 100-13 ～ 20-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular20-----38 ～ 98.913 ～ 20-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular25----40 ～ 100-18 ～ 25-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelLappingRegular25-----38 ～ 98.918 ～ 25-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular4----40 ～ 80-2 ～ 4-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular4-----34 ～ 39.92 ～ 4-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular4-----44 ～ 49.92 ～ 4-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular4-----54 ～ 59.92 ～ 4-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular4-----64 ～ 69.92 ～ 4-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular4-----74 ～ 79.92 ～ 4-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular5----40 ～ 80-2 ～ 5-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular5-----34 ～ 39.92 ～ 5-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular5-----44 ～ 49.92 ～ 5-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular5-----54 ～ 59.92 ～ 5-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular5-----64 ～ 69.92 ～ 5-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular5-----74 ～ 79.92 ～ 5-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular6----40 ～ 80-2 ～ 6-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular6-----34 ～ 39.92 ～ 6-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular6-----44 ～ 49.92 ～ 6-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular6-----54 ～ 59.92 ～ 6-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular6-----64 ～ 69.92 ～ 6-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular6-----74 ～ 79.92 ～ 6-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular8----40 ～ 100-3 ～ 8-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular8-----38 ～ 98.93 ～ 8-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular10----40 ～ 100-3 ～ 10-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular10-----38 ～ 98.93 ～ 10-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular13----40 ～ 100-6 ～ 13-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular13-----38 ～ 98.96 ～ 13-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular16----40 ～ 100-10 ～ 16-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular16-----38 ～ 98.910 ～ 16-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular20----40 ～ 100-13 ～ 20-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular20-----38 ～ 98.913 ～ 20-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular25----40 ～ 100-18 ～ 25-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingRegular25-----38 ～ 98.918 ～ 25-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingWith locating dowel hole10----60 ～ 100-3 ～ 10-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingWith locating dowel hole10-----38 ～ 98.93 ～ 10-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingWith locating dowel hole13----60 ～ 100-6 ～ 13-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingWith locating dowel hole13-----38 ～ 98.96 ～ 13-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingWith locating dowel hole16----60 ～ 100-10 ～ 16-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingWith locating dowel hole16-----38 ～ 98.910 ～ 16-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingWith locating dowel hole20----60 ～ 100-13 ～ 20-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingWith locating dowel hole20-----38 ～ 98.913 ～ 20-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingWith locating dowel hole25----60 ～ 100-18 ～ 25-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BSKD11 EquivalentLappingWith locating dowel hole25-----38 ～ 98.918 ～ 25-0.5 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelNoneRegular4----40 ～ 80-2 ～ 4-0.1 ～ 152 ～ 14.9-
1 Preventivo 106BPowdered high-speed steelNoneRegular4-----38 ～ 78.92 ～ 4-0.1 ～ 152 ～ 14.9-

Loading...

  1. 1
  2. 2
  3. 3
  4. Avanti >>
 

Informazioni di base

With/without jector With

Configura

Ripristina

126Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Material

    • SKD11 Equivalent
    • SKH51
    • Powdered high-speed steel

    Ripristina

  • Surface treatment

    • None
    • Lapping

    Ripristina

  • Shank (mounting part) shape

    • Regular
    • With locating dowel hole

    Ripristina

  • D (Shank diameter)(mm)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 13
    • 16
    • 20
    • 25

    Ripristina

  • A(°)

     

    Ripristina

  • E(mm)

     

    Ripristina

  • F(mm)

     

    Ripristina

  • K(°)

     

    Ripristina

  • L (L dimension)(mm)

     [40-100/10mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

     [34-98.9/0.1mmpezzi]

    Ripristina

  • P(mm)

     [2-25/0.01mmpezzi]

    Ripristina

  • Q(mm)

    • 0

     

    Ripristina

  • R(mm)

    • 0

     [0.1-15/0.1mmpezzi][0.01-9.51/0.5mmpezzi]

    Ripristina

  • S(mm)

     [2-14.9/0.1mmpezzi]

    Ripristina

  • V(mm)

     

    Ripristina

  • Tipo

    • L-PJ(2･5-7)B
    • L-PJ(3･4)A
    • L-PJ(5･7･8)C
    • L-PJ(6･7)D
    • L-SJ(2･5-7)B
    • L-SJ(3･4)A
    • L-SJ(5･7･8)C
    • L-SJ(6･7)D
    • L-SJ-C(2･5-7)B
    • L-SJ-C(3･4)A
    • L-SJ-C(5･7･8)C
    • L-SJ-C(6･7)D
    • PJ(2-4)A
    • PJ(2-7)B
    • PJ(2-8)C
    • PJ(3-9)D
    • SJ(2-4)A
    • SJ(2-7)B
    • SJ(2-8)C
    • SJ(3-9)D
    • SJ-C(2-4)A
    • SJ-C(2-7)B
    • SJ-C(2-8)C
    • SJ-C(3-9)D

    Ripristina

  • Tip shape

    • 2A
    • 2B
    • 2C
    • 3A
    • 3C
    • 3D
    • 4A
    • 4C
    • 4D
    • 5B
    • 5C
    • 5D
    • 6B
    • 6C
    • 6D
    • 7B
    • 7C
    • 7D
    • 8C
    • 9D

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.