• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni da taglio per forme speciali

Punzoni da taglio per forme speciali

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • SKH51
  • SKD11
  • POWDER HSS
  • TiCN

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. Avanti >>
Codice componente
H-HSKC11J-1-*-*******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]-K[0-270/90]-T[2-60/0.1]
H-HSKC11J-1-*-*******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]-K[0-270/90]-T[2-60/0.1]
H-HSKC11J-2-*-*******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]-K[0-270/90]-T[2-60/0.1]
H-HSKC11J-2-*-*******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]-K[0-270/90]-T[2-60/0.1]
H-HSKC11J-3-*-*******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]-K[0-270/90]-T[2-60/0.1]
H-HSKC11J-3-*-*******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]-K[0-270/90]-T[2-60/0.1]
H-HSMC11J-1-*-*******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]
H-HSMC11J-1-*-*******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]
H-HSMC11J-2-*-*******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]
H-HSMC11J-2-*-*******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]
H-HSMC11J-3-*-*******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]
H-HSMC11J-3-*-*******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]
H-HSPC11J-1-*-*******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]
H-HSPC11J-1-*-*******-LC[30-79/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]
H-HSPC11J-2-*-*******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]
H-HSPC11J-2-*-*******-LC[30-79/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]
H-HSPC11J-3-*-*******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]
H-HSPC11J-3-*-*******-LC[30-79/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]
H-PHKC11J-1-*-*******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]-K[0,​90,​180,​270]-T[5-75/0.01]
H-PHKC11J-1-*-*******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]-K[0,​90,​180,​270]-T[5-75/0.01]
H-PHKC11J-2-*-*******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]-K[0,​90,​180,​270]-T[5-75/0.01]
H-PHKC11J-2-*-*******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]-K[0,​90,​180,​270]-T[5-75/0.01]
H-PHKC11J-3-*-*******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]-K[0,​90,​180,​270]-T[5-75/0.01]
H-PHKC11J-3-*-*******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]-K[0,​90,​180,​270]-T[5-75/0.01]
H-PHMC11J-1-*-*******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]
H-PHMC11J-1-*-*******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]
H-PHMC11J-2-*-*******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]
H-PHMC11J-2-*-*******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]
H-PHMC11J-3-*-*******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]
H-PHMC11J-3-*-*******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]
H-PHPC11J-1-*-*******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]
H-PHPC11J-1-*-*******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]
H-PHPC11J-2-*-*******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]
H-PHPC11J-2-*-*******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]
H-PHPC11J-3-*-*******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]
H-PHPC11J-3-*-*******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]
HKC11J-1-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]-K[0-270/90]-T[2-60/0.1]
HKC11J-1-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]-K[0-270/90]-T[2-60/0.1]
HKC11J-2-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]-K[0-270/90]-T[2-60/0.1]
HKC11J-2-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]-K[0-270/90]-T[2-60/0.1]
HKC11J-3-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]-K[0-270/90]-T[2-60/0.1]
HKC11J-3-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]-K[0-270/90]-T[2-60/0.1]
HMC11J-1-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]
HMC11J-1-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]
HMC11J-2-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]
HMC11J-2-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]
HMC11J-3-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]
HMC11J-3-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]
HPC11J-1-******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]
HPC11J-1-******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]
HPC11J-2-******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]
HPC11J-2-******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]
HPC11J-3-******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]
HPC11J-3-******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]
PHKC11J-1-*******-[40-80/10]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]-K[0,​90,​180,​270]-T[5-75/0.01]
PHKC11J-1-*******-LC[30-79.9/0.1]-P[2-30/0.01]-W[2-10/0.01]-A[1-9/0.01]-B[1-29.5/0.01]-K[0,​90,​180,​270]-T[5-75/0.01]
PHKC11J-2-*******-[40-80/10]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]-K[0,​90,​180,​270]-T[5-75/0.01]
PHKC11J-2-*******-LC[30-79.9/0.1]-P[10.01-30/0.01]-W[10.01-20/0.01]-A[1-19/0.01]-B[1-29.5/0.01]-K[0,​90,​180,​270]-T[5-75/0.01]
PHKC11J-3-*******-[40-80/10]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]-K[0,​90,​180,​270]-T[5-75/0.01]
PHKC11J-3-*******-LC[30-79.9/0.1]-P[20.01-30/0.01]-W[20.01-30/0.01]-A[1-29/0.01]-B[1-29.5/0.01]-K[0,​90,​180,​270]-T[5-75/0.01]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape Material Surface treatment Punch shank (mounting part) shape No.
(No.) 		A
(mm) 		B
(mm) 		C
(mm) 		K L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		Other specifications P
(mm) 		Q
(mm) 		R
(mm) 		S
(mm) 		T W
(mm)

-

1 Preventivo 1011JSKH51 EquivalentTiCNWith key groove11 ～ 91 ～ 29.5-0 ～ 27040 ～ 80-※Designate with WOS2 ～ 30---2 ～ 602 ～ 10

-

1 Preventivo 1011JSKH51 EquivalentTiCNWith key groove11 ～ 91 ～ 29.5-0 ～ 270-30 ～ 79.9※Designate with WOS2 ～ 30---2 ～ 602 ～ 10

-

1 Preventivo 1011JSKH51 EquivalentTiCNWith key groove21 ～ 191 ～ 29.5-0 ～ 27040 ～ 80-※Designate with WOS10.01 ～ 30---2 ～ 6010.01 ～ 20

-

1 Preventivo 1011JSKH51 EquivalentTiCNWith key groove21 ～ 191 ～ 29.5-0 ～ 270-30 ～ 79.9※Designate with WOS10.01 ～ 30---2 ～ 6010.01 ～ 20

-

1 Preventivo 1011JSKH51 EquivalentTiCNWith key groove31 ～ 291 ～ 29.5-0 ～ 27040 ～ 80-※Designate with WOS20.01 ～ 30---2 ～ 6020.01 ～ 30

-

1 Preventivo 1011JSKH51 EquivalentTiCNWith key groove31 ～ 291 ～ 29.5-0 ～ 270-30 ～ 79.9※Designate with WOS20.01 ～ 30---2 ～ 6020.01 ～ 30

-

1 Preventivo 1011JSKH51 EquivalentTiCNTapped11 ～ 91 ～ 29.5--40 ～ 80-※Designate with WOS2 ～ 30----2 ～ 10

-

1 Preventivo 1011JSKH51 EquivalentTiCNTapped11 ～ 91 ～ 29.5---30 ～ 79.9※Designate with WOS2 ～ 30----2 ～ 10

-

1 Preventivo 1011JSKH51 EquivalentTiCNTapped21 ～ 191 ～ 29.5--40 ～ 80-※Designate with WOS10.01 ～ 30----10.01 ～ 20

-

1 Preventivo 1011JSKH51 EquivalentTiCNTapped21 ～ 191 ～ 29.5---30 ～ 79.9※Designate with WOS10.01 ～ 30----10.01 ～ 20

-

1 Preventivo 1011JSKH51 EquivalentTiCNTapped31 ～ 291 ～ 29.5--40 ～ 80-※Designate with WOS20.01 ～ 30----20.01 ～ 30

-

1 Preventivo 1011JSKH51 EquivalentTiCNTapped31 ～ 291 ～ 29.5---30 ～ 79.9※Designate with WOS20.01 ～ 30----20.01 ～ 30

-

1 Preventivo 1011JSKH51 EquivalentTiCNStandard11 ～ 91 ～ 29.5--40 ～ 80-※Designate with WOS2 ～ 30----2 ～ 10

-

1 Preventivo 1011JSKH51 EquivalentTiCNStandard11 ～ 91 ～ 29.5---30 ～ 79※Designate with WOS2 ～ 30----2 ～ 10

-

1 Preventivo 1011JSKH51 EquivalentTiCNStandard21 ～ 191 ～ 29.5--40 ～ 80-※Designate with WOS10.01 ～ 30----10.01 ～ 20

-

1 Preventivo 1011JSKH51 EquivalentTiCNStandard21 ～ 191 ～ 29.5---30 ～ 79※Designate with WOS10.01 ～ 30----10.01 ～ 20

-

1 Preventivo 1011JSKH51 EquivalentTiCNStandard31 ～ 291 ～ 29.5--40 ～ 80-※Designate with WOS20.01 ～ 30----20.01 ～ 30

-

1 Preventivo 1011JSKH51 EquivalentTiCNStandard31 ～ 291 ～ 29.5---30 ～ 79※Designate with WOS20.01 ～ 30----20.01 ～ 30

-

1 Preventivo 1011JPowdered high-speed steelTiCNWith key groove11 ～ 91 ～ 29.5-0 ～ 27040 ～ 80-※Designate with WOS2 ～ 30---5 ～ 752 ～ 10

-

1 Preventivo 1011JPowdered high-speed steelTiCNWith key groove11 ～ 91 ～ 29.5-0 ～ 270-30 ～ 79.9※Designate with WOS2 ～ 30---5 ～ 752 ～ 10

-

1 Preventivo 1011JPowdered high-speed steelTiCNWith key groove21 ～ 191 ～ 29.5-0 ～ 27040 ～ 80-※Designate with WOS10.01 ～ 30---5 ～ 7510.01 ～ 20

-

1 Preventivo 1011JPowdered high-speed steelTiCNWith key groove21 ～ 191 ～ 29.5-0 ～ 270-30 ～ 79.9※Designate with WOS10.01 ～ 30---5 ～ 7510.01 ～ 20

-

1 Preventivo 1011JPowdered high-speed steelTiCNWith key groove31 ～ 291 ～ 29.5-0 ～ 27040 ～ 80-※Designate with WOS20.01 ～ 30---5 ～ 7520.01 ～ 30

-

1 Preventivo 1011JPowdered high-speed steelTiCNWith key groove31 ～ 291 ～ 29.5-0 ～ 270-30 ～ 79.9※Designate with WOS20.01 ～ 30---5 ～ 7520.01 ～ 30

-

1 Preventivo 1011JPowdered high-speed steelTiCNTapped11 ～ 91 ～ 29.5--40 ～ 80-※Designate with WOS2 ～ 30----2 ～ 10

-

1 Preventivo 1011JPowdered high-speed steelTiCNTapped11 ～ 91 ～ 29.5---30 ～ 79.9※Designate with WOS2 ～ 30----2 ～ 10

-

1 Preventivo 1011JPowdered high-speed steelTiCNTapped21 ～ 191 ～ 29.5--40 ～ 80-※Designate with WOS10.01 ～ 30----10.01 ～ 20

-

1 Preventivo 1011JPowdered high-speed steelTiCNTapped21 ～ 191 ～ 29.5---30 ～ 79.9※Designate with WOS10.01 ～ 30----10.01 ～ 20

-

1 Preventivo 1011JPowdered high-speed steelTiCNTapped31 ～ 291 ～ 29.5--40 ～ 80-※Designate with WOS20.01 ～ 30----20.01 ～ 30

-

1 Preventivo 1011JPowdered high-speed steelTiCNTapped31 ～ 291 ～ 29.5---30 ～ 79.9※Designate with WOS20.01 ～ 30----20.01 ～ 30

-

1 Preventivo 1011JPowdered high-speed steelTiCNStandard11 ～ 91 ～ 29.5--40 ～ 80-※Designate with WOS2 ～ 30----2 ～ 10

-

1 Preventivo 1011JPowdered high-speed steelTiCNStandard11 ～ 91 ～ 29.5---30 ～ 79.9※Designate with WOS2 ～ 30----2 ～ 10

-

1 Preventivo 1011JPowdered high-speed steelTiCNStandard21 ～ 191 ～ 29.5--40 ～ 80-※Designate with WOS10.01 ～ 30----10.01 ～ 20

-

1 Preventivo 1011JPowdered high-speed steelTiCNStandard21 ～ 191 ～ 29.5---30 ～ 79.9※Designate with WOS10.01 ～ 30----10.01 ～ 20

-

1 Preventivo 1011JPowdered high-speed steelTiCNStandard31 ～ 291 ～ 29.5--40 ～ 80-※Designate with WOS20.01 ～ 30----20.01 ～ 30

-

1 Preventivo 1011JPowdered high-speed steelTiCNStandard31 ～ 291 ～ 29.5---30 ～ 79.9※Designate with WOS20.01 ～ 30----20.01 ～ 30

-

1 Preventivo 1011JSKH51 or SKD11 EquivalentNoneWith key groove11 ～ 91 ～ 29.5-0 ～ 27040 ～ 80-※Designate with WOS2 ～ 30---2 ～ 602 ～ 10

-

1 Preventivo 1011JSKH51 or SKD11 EquivalentNoneWith key groove11 ～ 91 ～ 29.5-0 ～ 270-30 ～ 79.9※Designate with WOS2 ～ 30---2 ～ 602 ～ 10

-

1 Preventivo 1011JSKD11 EquivalentNoneWith key groove21 ～ 191 ～ 29.5-0 ～ 27040 ～ 80-※Designate with WOS10.01 ～ 30---2 ～ 6010.01 ～ 20

-

1 Preventivo 1011JSKD11 EquivalentNoneWith key groove21 ～ 191 ～ 29.5-0 ～ 270-30 ～ 79.9※Designate with WOS10.01 ～ 30---2 ～ 6010.01 ～ 20

-

1 Preventivo 1011JSKD11 EquivalentNoneWith key groove31 ～ 291 ～ 29.5-0 ～ 27040 ～ 80-※Designate with WOS20.01 ～ 30---2 ～ 6020.01 ～ 30

-

1 Preventivo 1011JSKD11 EquivalentNoneWith key groove31 ～ 291 ～ 29.5-0 ～ 270-30 ～ 79.9※Designate with WOS20.01 ～ 30---2 ～ 6020.01 ～ 30

-

1 Preventivo 1011JSKH51 or SKD11 EquivalentNoneTapped11 ～ 91 ～ 29.5--40 ～ 80-※Designate with WOS2 ～ 30----2 ～ 10

-

1 Preventivo 1011JSKH51 or SKD11 EquivalentNoneTapped11 ～ 91 ～ 29.5---30 ～ 79.9※Designate with WOS2 ～ 30----2 ～ 10

-

1 Preventivo 1011JSKD11 EquivalentNoneTapped21 ～ 191 ～ 29.5--40 ～ 80-※Designate with WOS10.01 ～ 30----10.01 ～ 20

-

1 Preventivo 1011JSKD11 EquivalentNoneTapped21 ～ 191 ～ 29.5---30 ～ 79.9※Designate with WOS10.01 ～ 30----10.01 ～ 20

-

1 Preventivo 1011JSKD11 EquivalentNoneTapped31 ～ 291 ～ 29.5--40 ～ 80-※Designate with WOS20.01 ～ 30----20.01 ～ 30

-

1 Preventivo 1011JSKD11 EquivalentNoneTapped31 ～ 291 ～ 29.5---30 ～ 79.9※Designate with WOS20.01 ～ 30----20.01 ～ 30

-

1 Preventivo 1011JSKH51 or SKD11 EquivalentNoneStandard11 ～ 91 ～ 29.5--40 ～ 80-※Designate with WOS2 ～ 30----2 ～ 10

-

1 Preventivo 1011JSKH51 or SKD11 EquivalentNoneStandard11 ～ 91 ～ 29.5---30 ～ 79.9※Designate with WOS2 ～ 30----2 ～ 10

-

1 Preventivo 1011JSKD11 EquivalentNoneStandard21 ～ 191 ～ 29.5--40 ～ 80-※Designate with WOS10.01 ～ 30----10.01 ～ 20

-

1 Preventivo 1011JSKD11 EquivalentNoneStandard21 ～ 191 ～ 29.5---30 ～ 79.9※Designate with WOS10.01 ～ 30----10.01 ～ 20

-

1 Preventivo 1011JSKD11 EquivalentNoneStandard31 ～ 291 ～ 29.5--40 ～ 80-※Designate with WOS20.01 ～ 30----20.01 ～ 30

-

1 Preventivo 1011JSKD11 EquivalentNoneStandard31 ～ 291 ～ 29.5---30 ～ 79.9※Designate with WOS20.01 ～ 30----20.01 ～ 30

-

1 Preventivo 1011JPowdered high-speed steelNoneWith key groove11 ～ 91 ～ 29.5-0 ～ 27040 ～ 80-※Designate with WOS2 ～ 30---5 ～ 752 ～ 10

-

1 Preventivo 1011JPowdered high-speed steelNoneWith key groove11 ～ 91 ～ 29.5-0 ～ 270-30 ～ 79.9※Designate with WOS2 ～ 30---5 ～ 752 ～ 10

-

1 Preventivo 1011JPowdered high-speed steelNoneWith key groove21 ～ 191 ～ 29.5-0 ～ 27040 ～ 80-※Designate with WOS10.01 ～ 30---5 ～ 7510.01 ～ 20

-

1 Preventivo 1011JPowdered high-speed steelNoneWith key groove21 ～ 191 ～ 29.5-0 ～ 270-30 ～ 79.9※Designate with WOS10.01 ～ 30---5 ～ 7510.01 ～ 20

-

1 Preventivo 1011JPowdered high-speed steelNoneWith key groove31 ～ 291 ～ 29.5-0 ～ 27040 ～ 80-※Designate with WOS20.01 ～ 30---5 ～ 7520.01 ～ 30

-

1 Preventivo 1011JPowdered high-speed steelNoneWith key groove31 ～ 291 ～ 29.5-0 ～ 270-30 ～ 79.9※Designate with WOS20.01 ～ 30---5 ～ 7520.01 ～ 30

Loading...

  1. 1
  2. 2
  3. Avanti >>
 

Informazioni di base

Type Straight punch

Configura

Ripristina

72Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel
    • SKH51 or SKD11 Equivalent

    Ripristina

  • Surface treatment

    • None
    • TiCN

    Ripristina

  • Punch shank (mounting part) shape

    • Standard
    • Tapped
    • With key groove

    Ripristina

  • No.(No.)

    • 1
    • 2
    • 3

    Ripristina

  • A(mm)

     [1-29/0.01mmpezzi]

    Ripristina

  • B(mm)

     [1-29.5/0.01mmpezzi]

    Ripristina

  • C(mm)

    • 0

     

    Ripristina

  • K

    • 0
    • 90
    • 180
    • 270

     [0-270/90]

    Ripristina

  • L (L dimension)(mm)

     [40-80/10mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

     [30-79.9/0.1mmpezzi]

    Ripristina

  • Other specifications

    • ※Designate with WOS

    Ripristina

  • P(mm)

     [2-30/0.01mmpezzi]

    Ripristina

  • Q(mm)

    • 0

     

    Ripristina

  • R(mm)

    • 0
    • 0.01
    • 0.2
    • 40

     

    Ripristina

  • S(mm)

    • 0
    • 0.01
    • 0.2
    • 40

     

    Ripristina

  • T

     [2-60/0.1][5-75/0.01]

    Ripristina

  • W(mm)

     [2-30/0.01mmpezzi]

    Ripristina

  • Tipo

    • H-HSKC(2-12)H
    • H-HSKC(2-28)J
    • H-HSKC(2-7)L
    • H-HSKC(3-28)K
    • H-HSMC(2-12)H
    • H-HSMC(2-18)J
    • H-HSMC(2-7)L
    • H-HSMC(3-28)K
    • H-HSPC(2-12)H
    • H-HSPC(2-18)J
    • H-HSPC(2-7)L
    • H-HSPC(3-28)K
    • H-PHKC(2-12)H
    • H-PHKC(2-18)J
    • H-PHKC(2-7)L
    • H-PHKC(3-28)K
    • H-PHMC(2-12)H
    • H-PHMC(2-18)J
    • H-PHMC(2-7)L
    • H-PHMC(3-28)K
    • H-PHPC(2-12)H
    • H-PHPC(2-18)J
    • H-PHPC(2-7)L
    • H-PHPC(3-28)K
    • HKC(2-12)H
    • HKC(2-18)J
    • HKC(2-7)L
    • HKC(3-28)K
    • HMC(2-12)H
    • HMC(2-18)J
    • HMC(2-7)L
    • HMC(3-28)K
    • HPC(2-12)H
    • HPC(2-18)J
    • HPC(2-7)L
    • HPC(3-28)K
    • PHKC(2-12)H
    • PHKC(2-18)J
    • PHKC(2-7)L
    • PHKC(3-28)K
    • PHMC(2-12)H
    • PHMC(2-18)J
    • PHMC(2-7)L
    • PHMC(3-28)K
    • PHPC(2-12)H
    • PHPC(2-18)J
    • PHPC(2-7)L
    • PHPC(3-28)K

    Ripristina

  • Tip shape

    • 2H
    • 4H
    • 5H
    • 6H
    • 7H
    • 8H
    • 9H
    • 10H
    • 11H
    • 12H
    • 2J
    • 3J
    • 4J
    • 5J
    • 8J
    • 9J
    • 10J
    • 11J
    • 12J
    • 13J
    • 14J
    • 15J
    • 16J
    • 17J
    • 18J
    • 3K
    • 4K
    • 5K
    • 6K
    • 8K
    • 9K
    • 10K
    • 13K
    • 14K
    • 15K
    • 17K
    • 18K
    • 20K
    • 21K
    • 22K
    • 23K
    • 25K
    • 27K
    • 28K
    • 2L
    • 3L
    • 4L
    • 5L
    • 7L

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.