• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni da taglio in forme speciali (Codici componente - Download CAD)

Punzoni da taglio in forme speciali

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • SKH51
  • SKD11
  • POWDER HSS
  • TiCN
  • HW
  • WPC

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. << Indietro
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Avanti >>
Codice componente
PH2J13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]-R[0.2-40/0.01]-S0
PH2J13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
PH2J13-LC[39-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]-R0-S0
PH2J13-LC[39-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]-R0-S[0.2-20/0.01]
PH2J13-LC[39-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]-R[0.2-40/0.01]-S0
PH2J13-LC[39-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
PH2J16-[40-100/10]-P[4-15.9/0.01]-W[4-15.9/0.01]-R0-S0
PH2J16-[40-100/10]-P[4-15.9/0.01]-W[4-15.9/0.01]-R0-S[0.2-20/0.01]
PH2J16-[40-100/10]-P[4-15.9/0.01]-W[4-15.9/0.01]-R[0.2-40/0.01]-S0
PH2J16-[40-100/10]-P[4-15.9/0.01]-W[4-15.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
PH2J16-LC[39-99.9/0.1]-P[4-15.9/0.01]-W[4-15.9/0.01]-R0-S0
PH2J16-LC[39-99.9/0.1]-P[4-15.9/0.01]-W[4-15.9/0.01]-R0-S[0.2-20/0.01]
PH2J16-LC[39-99.9/0.1]-P[4-15.9/0.01]-W[4-15.9/0.01]-R[0.2-40/0.01]-S0
PH2J16-LC[39-99.9/0.1]-P[4-15.9/0.01]-W[4-15.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
PH2J20-[40-100/10]-P[5-19.9/0.01]-W[5-19.9/0.01]-R0-S0
PH2J20-[40-100/10]-P[5-19.9/0.01]-W[5-19.9/0.01]-R0-S[0.2-20/0.01]
PH2J20-[40-100/10]-P[5-19.9/0.01]-W[5-19.9/0.01]-R[0.2-40/0.01]-S0
PH2J20-[40-100/10]-P[5-19.9/0.01]-W[5-19.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
PH2J20-LC[39-99.9/0.1]-P[5-19.9/0.01]-W[5-19.9/0.01]-R0-S0
PH2J20-LC[39-99.9/0.1]-P[5-19.9/0.01]-W[5-19.9/0.01]-R0-S[0.2-20/0.01]
PH2J20-LC[39-99.9/0.1]-P[5-19.9/0.01]-W[5-19.9/0.01]-R[0.2-40/0.01]-S0
PH2J20-LC[39-99.9/0.1]-P[5-19.9/0.01]-W[5-19.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
PH2J25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-R0-S0
PH2J25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-R0-S[0.2-20/0.01]
PH2J25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-R[0.2-40/0.01]-S0
PH2J25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
PH2J25-LC[39-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-R0-S0
PH2J25-LC[39-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-R0-S[0.2-20/0.01]
PH2J25-LC[39-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-R[0.2-40/0.01]-S0
PH2J25-LC[39-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
PH2L4-[40-80/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L4-[40-80/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L4-LC[37-79.5/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L4-LC[37-79.5/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L5-[40-80/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L5-[40-80/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L5-LC[37-79.5/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L5-LC[37-79.5/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L6-[40-80/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L6-[40-80/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L6-LC[37-79.5/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L6-LC[37-79.5/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L8-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L8-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L8-LC[37-99.5/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L8-LC[37-99.5/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L10-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L10-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L10-LC[37-99.5/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L10-LC[37-99.5/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L13-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L13-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L13-LC[37-99.5/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L13-LC[37-99.5/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L16-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L16-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L16-LC[37-99.5/0.1]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L16-LC[37-99.5/0.1]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L20-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-48/0.01]-S[0.2-50/0.01]
PH2L20-[40-100/10]-A[1-90/0.1]-Q[0.2-50/0.01]-R[0.2-48/0.01]-S[0.2-50/0.01]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape Material Punch shank (mounting part) shape D (Outer diameter)
(mm) 		L A B C LC P Q R S TC W

-

1 Preventivo 102JPowdered high-speed steelStandard1340 ～ 100----3 ～ 12.9-0.2 ～ 400-3 ～ 12.9

-

1 Preventivo 102JPowdered high-speed steelStandard1340 ～ 100----3 ～ 12.9-0.2 ～ 400.2 ～ 20-3 ～ 12.9

-

1 Preventivo 102JPowdered high-speed steelStandard13----39 ～ 99.93 ～ 12.9-00-3 ～ 12.9

-

1 Preventivo 102JPowdered high-speed steelStandard13----39 ～ 99.93 ～ 12.9-00.2 ～ 20-3 ～ 12.9

-

1 Preventivo 102JPowdered high-speed steelStandard13----39 ～ 99.93 ～ 12.9-0.2 ～ 400-3 ～ 12.9

-

1 Preventivo 102JPowdered high-speed steelStandard13----39 ～ 99.93 ～ 12.9-0.2 ～ 400.2 ～ 20-3 ～ 12.9

-

1 Preventivo 102JPowdered high-speed steelStandard1640 ～ 100----4 ～ 15.9-00-4 ～ 15.9

-

1 Preventivo 102JPowdered high-speed steelStandard1640 ～ 100----4 ～ 15.9-00.2 ～ 20-4 ～ 15.9

-

1 Preventivo 102JPowdered high-speed steelStandard1640 ～ 100----4 ～ 15.9-0.2 ～ 400-4 ～ 15.9

-

1 Preventivo 102JPowdered high-speed steelStandard1640 ～ 100----4 ～ 15.9-0.2 ～ 400.2 ～ 20-4 ～ 15.9

-

1 Preventivo 102JPowdered high-speed steelStandard16----39 ～ 99.94 ～ 15.9-00-4 ～ 15.9

-

1 Preventivo 102JPowdered high-speed steelStandard16----39 ～ 99.94 ～ 15.9-00.2 ～ 20-4 ～ 15.9

-

1 Preventivo 102JPowdered high-speed steelStandard16----39 ～ 99.94 ～ 15.9-0.2 ～ 400-4 ～ 15.9

-

1 Preventivo 102JPowdered high-speed steelStandard16----39 ～ 99.94 ～ 15.9-0.2 ～ 400.2 ～ 20-4 ～ 15.9

-

1 Preventivo 102JPowdered high-speed steelStandard2040 ～ 100----5 ～ 19.9-00-5 ～ 19.9

-

1 Preventivo 102JPowdered high-speed steelStandard2040 ～ 100----5 ～ 19.9-00.2 ～ 20-5 ～ 19.9

-

1 Preventivo 102JPowdered high-speed steelStandard2040 ～ 100----5 ～ 19.9-0.2 ～ 400-5 ～ 19.9

-

1 Preventivo 102JPowdered high-speed steelStandard2040 ～ 100----5 ～ 19.9-0.2 ～ 400.2 ～ 20-5 ～ 19.9

-

1 Preventivo 102JPowdered high-speed steelStandard20----39 ～ 99.95 ～ 19.9-00-5 ～ 19.9

-

1 Preventivo 102JPowdered high-speed steelStandard20----39 ～ 99.95 ～ 19.9-00.2 ～ 20-5 ～ 19.9

-

1 Preventivo 102JPowdered high-speed steelStandard20----39 ～ 99.95 ～ 19.9-0.2 ～ 400-5 ～ 19.9

-

1 Preventivo 102JPowdered high-speed steelStandard20----39 ～ 99.95 ～ 19.9-0.2 ～ 400.2 ～ 20-5 ～ 19.9

-

1 Preventivo 102JPowdered high-speed steelStandard2540 ～ 100----6 ～ 24.9-00-6 ～ 24.9

-

1 Preventivo 102JPowdered high-speed steelStandard2540 ～ 100----6 ～ 24.9-00.2 ～ 20-6 ～ 24.9

-

1 Preventivo 102JPowdered high-speed steelStandard2540 ～ 100----6 ～ 24.9-0.2 ～ 400-6 ～ 24.9

-

1 Preventivo 102JPowdered high-speed steelStandard2540 ～ 100----6 ～ 24.9-0.2 ～ 400.2 ～ 20-6 ～ 24.9

-

1 Preventivo 102JPowdered high-speed steelStandard25----39 ～ 99.96 ～ 24.9-00-6 ～ 24.9

-

1 Preventivo 102JPowdered high-speed steelStandard25----39 ～ 99.96 ～ 24.9-00.2 ～ 20-6 ～ 24.9

-

1 Preventivo 102JPowdered high-speed steelStandard25----39 ～ 99.96 ～ 24.9-0.2 ～ 400-6 ～ 24.9

-

1 Preventivo 102JPowdered high-speed steelStandard25----39 ～ 99.96 ～ 24.9-0.2 ～ 400.2 ～ 20-6 ～ 24.9

-

1 Preventivo 102LPowdered high-speed steelStandard440 ～ 801 ～ 90----00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard440 ～ 801 ～ 90----0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard4-1 ～ 90--37 ～ 79.5-00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard4-1 ～ 90--37 ～ 79.5-0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard540 ～ 801 ～ 90----00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard540 ～ 801 ～ 90----0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard5-1 ～ 90--37 ～ 79.5-00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard5-1 ～ 90--37 ～ 79.5-0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard640 ～ 801 ～ 90----00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard640 ～ 801 ～ 90----0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard6-1 ～ 90--37 ～ 79.5-00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard6-1 ～ 90--37 ～ 79.5-0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard840 ～ 1001 ～ 90----00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard840 ～ 1001 ～ 90----0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard8-1 ～ 90--37 ～ 99.5-00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard8-1 ～ 90--37 ～ 99.5-0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard1040 ～ 1001 ～ 90----00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard1040 ～ 1001 ～ 90----0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard10-1 ～ 90--37 ～ 99.5-00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard10-1 ～ 90--37 ～ 99.5-0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard1340 ～ 1001 ～ 90----00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard1340 ～ 1001 ～ 90----0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard13-1 ～ 90--37 ～ 99.5-00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard13-1 ～ 90--37 ～ 99.5-0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard1640 ～ 1001 ～ 90----00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard1640 ～ 1001 ～ 90----0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard16-1 ～ 90--37 ～ 99.5-00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard16-1 ～ 90--37 ～ 99.5-0.2 ～ 500.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard2040 ～ 1001 ～ 90----00.2 ～ 480.2 ～ 50--

-

1 Preventivo 102LPowdered high-speed steelStandard2040 ～ 1001 ～ 90----0.2 ～ 500.2 ～ 480.2 ～ 50--

Loading...

  1. << Indietro
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Avanti >>
 

Informazioni di base

Type Shoulder punch Surface treatment None

Configura

Ripristina

5,056Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Tip shape

    • 2H
    • 2J
    • 2L
    • 3J
    • 3K
    • 3L
    • 4H
    • 4J
    • 4K
    • 4L
    • 5H
    • 5J
    • 5K
    • 5L
    • 6H
    • 6K
    • 7H
    • 7L
    • 8H
    • 8J
    • 8K
    • 8L
    • 9H
    • 9J
    • 9K
    • 10H
    • 10J
    • 10K
    • 11H
    • 11J
    • 12H
    • 12J
    • 13J
    • 13K
    • 14J
    • 14K
    • 15J
    • 15K
    • 16J
    • 17J
    • 17K
    • 18J
    • 18K
    • 20K
    • 21K
    • 22K
    • 23K
    • 25K
    • 27K
    • 28K
    • 29K

    Ripristina

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel

    Ripristina

  • D (Outer diameter)(mm)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 13
    • 16
    • 20
    • 25
    • 32
    • 38
    • 45

    Ripristina

  • L

    • 40
    • 50
    • 60
    • 70
    • 80
    • 90
    • 100

     [40-100/0.1][40-100/10]

    Ripristina

  • A

     [0.1-90/0.1][0.4-24.89/0.01]

    Ripristina

  • B

     [0.5-24.8/0.1][0.22-24.89/0.01]

    Ripristina

  • C

    • 0

     [0.2-40/0.1][0.2-40/0.01]

    Ripristina

  • LC

     [31-100/0.1][40-90/10]

    Ripristina

  • P

     [2-24.9/0.01]

    Ripristina

  • Q

    • 0

     [0.2-20/0.1][0.2-50/0.01]

    Ripristina

  • R

    • 0

     [0.2-50/0.01]

    Ripristina

  • S

    • 0
    • 0.3

     [0.2-20/0.1][0.1-50/0.01]

    Ripristina

  • TC

     [2-4.9/0.1]

    Ripristina

  • W

     [2-24.92/0.01]

    Ripristina

  • Tipo

    • AP(2-12)H
    • AP(2-18)J
    • AP(2-7)L
    • AP(3-29)K
    • APH(2-12)H
    • APH(2-18)J
    • APH(2-7)L
    • APH(3-29)K
    • MP(2-12)H
    • MP(2-18)J
    • MP(2-7)L
    • MP(3-29)K
    • PH(2-12)H
    • PH(2-18)J
    • PH(2-7)L
    • PH(3-29)K
    • SH(2-12)H
    • SH(2-18)J
    • SH(2-7)L
    • SH(3-29)K
    • SP(2-12)H
    • SP(2-18)J
    • SP(2-7)L
    • SP(3-29)K
    • SP-C(2-12)H
    • SP-C(2-18)J
    • SP-C(2-8)L
    • SP-C(3-29)K

    Ripristina

  • Punch shank (mounting part) shape

    • Standard
    • With locating dowel hole
    • Heavy load
    • Tapped

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.