• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni da taglio in forme speciali / TiCN, HW, WPC

Punzoni da taglio in forme speciali / TiCN, HW, WPC

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • SKH51
  • SKD11
  • POWDER HSS
  • TiCN
  • HW
  • WPC

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Avanti >>
Codice componente
H-SP-C2H10-[40-100/10]-P[2.5-9.9/0.01]-W[2.5-9.9/0.01]
H-SP-C2H10-LC[39-99.9/0.1]-P[2.5-9.9/0.01]-W[2.5-9.9/0.01]
H-SP-C2H13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]
H-SP-C2H13-LC[39-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]
H-SP-C2H16-[40-100/10]-P[4-15.9/0.01]-W[4-15.9/0.01]
H-SP-C2H16-LC[39-99.9/0.1]-P[4-15.9/0.01]-W[4-15.9/0.01]
H-SP-C2H20-[40-100/10]-P[5-19.9/0.01]-W[5-19.9/0.01]
H-SP-C2H20-LC[39-99.9/0.1]-P[5-19.9/0.01]-W[5-19.9/0.01]
H-SP-C2H25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]
H-SP-C2H25-LC[39-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]
H-SP-C2J10-[40-100/10]-P[2.5-9.9/0.01]-W[2.5-9.9/0.01]-R0-S0
H-SP-C2J10-[40-100/10]-P[2.5-9.9/0.01]-W[2.5-9.9/0.01]-R0-S[0.2-20/0.01]
H-SP-C2J10-[40-100/10]-P[2.5-9.9/0.01]-W[2.5-9.9/0.01]-R[0.2-40/0.01]-S0
H-SP-C2J10-[40-100/10]-P[2.5-9.9/0.01]-W[2.5-9.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SP-C2J10-LC[39-99.9/0.1]-P[2.5-9.9/0.01]-W[2.5-9.9/0.01]-R0-S0
H-SP-C2J10-LC[39-99.9/0.1]-P[2.5-9.9/0.01]-W[2.5-9.9/0.01]-R0-S[0.2-20/0.01]
H-SP-C2J10-LC[39-99.9/0.1]-P[2.5-9.9/0.01]-W[2.5-9.9/0.01]-R[0.2-40/0.01]-S0
H-SP-C2J10-LC[39-99.9/0.1]-P[2.5-9.9/0.01]-W[2.5-9.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SP-C2J13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]-R0-S0
H-SP-C2J13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]-R0-S[0.2-20/0.01]
H-SP-C2J13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]-R[0.2-40/0.01]-S0
H-SP-C2J13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SP-C2J13-LC[39-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]-R0-S0
H-SP-C2J13-LC[39-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]-R0-S[0.2-20/0.01]
H-SP-C2J13-LC[39-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]-R[0.2-40/0.01]-S0
H-SP-C2J13-LC[39-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SP-C2J16-[40-100/10]-P[4-15.9/0.01]-W[4-15.9/0.01]-R0-S0
H-SP-C2J16-[40-100/10]-P[4-15.9/0.01]-W[4-15.9/0.01]-R0-S[0.2-20/0.01]
H-SP-C2J16-[40-100/10]-P[4-15.9/0.01]-W[4-15.9/0.01]-R[0.2-40/0.01]-S0
H-SP-C2J16-[40-100/10]-P[4-15.9/0.01]-W[4-15.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SP-C2J16-LC[39-99.9/0.1]-P[4-15.9/0.01]-W[4-15.9/0.01]-R0-S0
H-SP-C2J16-LC[39-99.9/0.1]-P[4-15.9/0.01]-W[4-15.9/0.01]-R0-S[0.2-20/0.01]
H-SP-C2J16-LC[39-99.9/0.1]-P[4-15.9/0.01]-W[4-15.9/0.01]-R[0.2-40/0.01]-S0
H-SP-C2J16-LC[39-99.9/0.1]-P[4-15.9/0.01]-W[4-15.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SP-C2J20-[40-100/10]-P[5-19.9/0.01]-W[5-19.9/0.01]-R0-S0
H-SP-C2J20-[40-100/10]-P[5-19.9/0.01]-W[5-19.9/0.01]-R0-S[0.2-20/0.01]
H-SP-C2J20-[40-100/10]-P[5-19.9/0.01]-W[5-19.9/0.01]-R[0.2-40/0.01]-S0
H-SP-C2J20-[40-100/10]-P[5-19.9/0.01]-W[5-19.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SP-C2J20-LC[39-99.9/0.1]-P[5-19.9/0.01]-W[5-19.9/0.01]-R0-S0
H-SP-C2J20-LC[39-99.9/0.1]-P[5-19.9/0.01]-W[5-19.9/0.01]-R0-S[0.2-20/0.01]
H-SP-C2J20-LC[39-99.9/0.1]-P[5-19.9/0.01]-W[5-19.9/0.01]-R[0.2-40/0.01]-S0
H-SP-C2J20-LC[39-99.9/0.1]-P[5-19.9/0.01]-W[5-19.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SP-C2J25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-R0-S0
H-SP-C2J25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-R0-S[0.2-20/0.01]
H-SP-C2J25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-R[0.2-40/0.01]-S0
H-SP-C2J25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SP-C2J25-LC[39-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-R0-S0
H-SP-C2J25-LC[39-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-R0-S[0.2-20/0.01]
H-SP-C2J25-LC[39-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-R[0.2-40/0.01]-S0
H-SP-C2J25-LC[39-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SP-C2L10-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-50/0.01]-S[0.2-50/0.01]
H-SP-C2L10-[40-100/10]-A[1-90/0.1]-Q[0.2-90/0.01]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-SP-C2L10-LC[39-99.9/0.1]-A[1-90/0.1]-Q0-R[0.2-50/0.01]-S[0.2-50/0.01]
H-SP-C2L10-LC[39-99.9/0.1]-A[1-90/0.1]-Q[0.2-90/0.01]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-SP-C2L13-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-50/0.01]-S[0.2-50/0.01]
H-SP-C2L13-[40-100/10]-A[1-90/0.1]-Q[0.2-90/0.01]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-SP-C2L13-LC[39-99.9/0.1]-A[1-90/0.1]-Q0-R[0.2-50/0.01]-S[0.2-50/0.01]
H-SP-C2L13-LC[39-99.9/0.1]-A[1-90/0.1]-Q[0.2-90/0.01]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-SP-C2L16-[40-100/10]-A[1-90/0.1]-Q0-R[0.2-50/0.01]-S[0.2-50/0.01]
H-SP-C2L16-[40-100/10]-A[1-90/0.1]-Q[0.2-90/0.01]-R[0.2-50/0.01]-S[0.2-50/0.01]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape Material Surface treatment Punch shank (mounting part) shape D (Outer diameter)
(mm) 		L A B C LC P Q R S W

-

1 Preventivo 102HSKD11 EquivalentTiCNWith locating dowel hole1040 ～ 100----2.5 ～ 9.9---2.5 ～ 9.9

-

1 Preventivo 102HSKD11 EquivalentTiCNWith locating dowel hole10----39 ～ 99.92.5 ～ 9.9---2.5 ～ 9.9

-

1 Preventivo 102HSKD11 EquivalentTiCNWith locating dowel hole1340 ～ 100----3 ～ 12.9---3 ～ 12.9

-

1 Preventivo 102HSKD11 EquivalentTiCNWith locating dowel hole13----39 ～ 99.93 ～ 12.9---3 ～ 12.9

-

1 Preventivo 102HSKD11 EquivalentTiCNWith locating dowel hole1640 ～ 100----4 ～ 15.9---4 ～ 15.9

-

1 Preventivo 102HSKD11 EquivalentTiCNWith locating dowel hole16----39 ～ 99.94 ～ 15.9---4 ～ 15.9

-

1 Preventivo 102HSKD11 EquivalentTiCNWith locating dowel hole2040 ～ 100----5 ～ 19.9---5 ～ 19.9

-

1 Preventivo 102HSKD11 EquivalentTiCNWith locating dowel hole20----39 ～ 99.95 ～ 19.9---5 ～ 19.9

-

1 Preventivo 102HSKD11 EquivalentTiCNWith locating dowel hole2540 ～ 100----6 ～ 24.9---6 ～ 24.9

-

1 Preventivo 102HSKD11 EquivalentTiCNWith locating dowel hole25----39 ～ 99.96 ～ 24.9---6 ～ 24.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole1040 ～ 100----2.5 ～ 9.9-002.5 ～ 9.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole1040 ～ 100----2.5 ～ 9.9-00.2 ～ 202.5 ～ 9.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole1040 ～ 100----2.5 ～ 9.9-0.2 ～ 4002.5 ～ 9.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole1040 ～ 100----2.5 ～ 9.9-0.2 ～ 400.2 ～ 202.5 ～ 9.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole10----39 ～ 99.92.5 ～ 9.9-002.5 ～ 9.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole10----39 ～ 99.92.5 ～ 9.9-00.2 ～ 202.5 ～ 9.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole10----39 ～ 99.92.5 ～ 9.9-0.2 ～ 4002.5 ～ 9.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole10----39 ～ 99.92.5 ～ 9.9-0.2 ～ 400.2 ～ 202.5 ～ 9.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole1340 ～ 100----3 ～ 12.9-003 ～ 12.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole1340 ～ 100----3 ～ 12.9-00.2 ～ 203 ～ 12.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole1340 ～ 100----3 ～ 12.9-0.2 ～ 4003 ～ 12.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole1340 ～ 100----3 ～ 12.9-0.2 ～ 400.2 ～ 203 ～ 12.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole13----39 ～ 99.93 ～ 12.9-003 ～ 12.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole13----39 ～ 99.93 ～ 12.9-00.2 ～ 203 ～ 12.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole13----39 ～ 99.93 ～ 12.9-0.2 ～ 4003 ～ 12.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole13----39 ～ 99.93 ～ 12.9-0.2 ～ 400.2 ～ 203 ～ 12.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole1640 ～ 100----4 ～ 15.9-004 ～ 15.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole1640 ～ 100----4 ～ 15.9-00.2 ～ 204 ～ 15.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole1640 ～ 100----4 ～ 15.9-0.2 ～ 4004 ～ 15.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole1640 ～ 100----4 ～ 15.9-0.2 ～ 400.2 ～ 204 ～ 15.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole16----39 ～ 99.94 ～ 15.9-004 ～ 15.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole16----39 ～ 99.94 ～ 15.9-00.2 ～ 204 ～ 15.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole16----39 ～ 99.94 ～ 15.9-0.2 ～ 4004 ～ 15.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole16----39 ～ 99.94 ～ 15.9-0.2 ～ 400.2 ～ 204 ～ 15.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole2040 ～ 100----5 ～ 19.9-005 ～ 19.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole2040 ～ 100----5 ～ 19.9-00.2 ～ 205 ～ 19.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole2040 ～ 100----5 ～ 19.9-0.2 ～ 4005 ～ 19.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole2040 ～ 100----5 ～ 19.9-0.2 ～ 400.2 ～ 205 ～ 19.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole20----39 ～ 99.95 ～ 19.9-005 ～ 19.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole20----39 ～ 99.95 ～ 19.9-00.2 ～ 205 ～ 19.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole20----39 ～ 99.95 ～ 19.9-0.2 ～ 4005 ～ 19.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole20----39 ～ 99.95 ～ 19.9-0.2 ～ 400.2 ～ 205 ～ 19.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole2540 ～ 100----6 ～ 24.9-006 ～ 24.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole2540 ～ 100----6 ～ 24.9-00.2 ～ 206 ～ 24.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole2540 ～ 100----6 ～ 24.9-0.2 ～ 4006 ～ 24.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole2540 ～ 100----6 ～ 24.9-0.2 ～ 400.2 ～ 206 ～ 24.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole25----39 ～ 99.96 ～ 24.9-006 ～ 24.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole25----39 ～ 99.96 ～ 24.9-00.2 ～ 206 ～ 24.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole25----39 ～ 99.96 ～ 24.9-0.2 ～ 4006 ～ 24.9

-

1 Preventivo 102JSKD11 EquivalentTiCNWith locating dowel hole25----39 ～ 99.96 ～ 24.9-0.2 ～ 400.2 ～ 206 ～ 24.9

-

1 Preventivo 102LSKD11 EquivalentTiCNWith locating dowel hole1040 ～ 1001 ～ 90----00.2 ～ 500.2 ～ 50-

-

1 Preventivo 102LSKD11 EquivalentTiCNWith locating dowel hole1040 ～ 1001 ～ 90----0.2 ～ 900.2 ～ 500.2 ～ 50-

-

1 Preventivo 102LSKD11 EquivalentTiCNWith locating dowel hole10-1 ～ 90--39 ～ 99.9-00.2 ～ 500.2 ～ 50-

-

1 Preventivo 102LSKD11 EquivalentTiCNWith locating dowel hole10-1 ～ 90--39 ～ 99.9-0.2 ～ 900.2 ～ 500.2 ～ 50-

-

1 Preventivo 102LSKD11 EquivalentTiCNWith locating dowel hole1340 ～ 1001 ～ 90----00.2 ～ 500.2 ～ 50-

-

1 Preventivo 102LSKD11 EquivalentTiCNWith locating dowel hole1340 ～ 1001 ～ 90----0.2 ～ 900.2 ～ 500.2 ～ 50-

-

1 Preventivo 102LSKD11 EquivalentTiCNWith locating dowel hole13-1 ～ 90--39 ～ 99.9-00.2 ～ 500.2 ～ 50-

-

1 Preventivo 102LSKD11 EquivalentTiCNWith locating dowel hole13-1 ～ 90--39 ～ 99.9-0.2 ～ 900.2 ～ 500.2 ～ 50-

-

1 Preventivo 102LSKD11 EquivalentTiCNWith locating dowel hole1640 ～ 1001 ～ 90----00.2 ～ 500.2 ～ 50-

-

1 Preventivo 102LSKD11 EquivalentTiCNWith locating dowel hole1640 ～ 1001 ～ 90----0.2 ～ 900.2 ～ 500.2 ～ 50-

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Avanti >>
 

Informazioni di base

Type Shoulder punch

Configura

Ripristina

5,259Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Tip shape

    • 2H
    • 2J
    • 2L
    • 3J
    • 3K
    • 3L
    • 4H
    • 4J
    • 4K
    • 4L
    • 5H
    • 5J
    • 5L
    • 6H
    • 6K
    • 7H
    • 7L
    • 8H
    • 8J
    • 8K
    • 8L
    • 9H
    • 9J
    • 9K
    • 10H
    • 11H
    • 11J
    • 12H
    • 12J
    • 13K
    • 14J
    • 14K
    • 15J
    • 15K
    • 16J
    • 17J
    • 17K
    • 18J
    • 20K
    • 21K
    • 22K
    • 23K
    • 25K
    • 27K
    • 28K
    • 29K

    Ripristina

  • Surface treatment

    • TiCN
    • HW coating
    • WPC

    Ripristina

  • Punch shank (mounting part) shape

    • Standard
    • With locating dowel hole
    • Heavy load
    • Tapped

    Ripristina

  • D (Outer diameter)(mm)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 13
    • 16
    • 20
    • 25
    • 32
    • 38
    • 45

    Ripristina

  • L

    • 40
    • 50
    • 60
    • 70
    • 80
    • 90
    • 100

     [40-120/10]

    Ripristina

  • A

     [1-90/0.1][0.5-44.8/0.01]

    Ripristina

  • B

     [0.22-44/0.01]

    Ripristina

  • C

    • 0

     [0.2-40/0.1][0.2-40/0.01]

    Ripristina

  • LC

     [39-119.9/0.1][39-99.99/0.01]

    Ripristina

  • P

     [2-44.9/0.01]

    Ripristina

  • Q

    • 0

     [0.2-20/0.1][0.2-90/0.01]

    Ripristina

  • R

    • 0

     [0.2-50/0.01]

    Ripristina

  • S

    • 0
    • 0.3

     [0.2-20/0.1][0.2-50/0.01]

    Ripristina

  • W

     [0-45/0.01]

    Ripristina

  • Tipo

    • H-AP(2-12)H
    • H-AP(2-18)J
    • H-AP(2-7)L
    • H-AP(3-29)K
    • H-APH(2-12)H
    • H-APH(2-18)J
    • H-APH(2-7)L
    • H-APH(3-29)K
    • H-PH(2-12)H
    • H-PH(2-7)L
    • H-PH(3-29)K
    • H-SH(2-12)H
    • H-SH(2-18)J
    • H-SH(2-7)L
    • H-SH(3-29)K
    • H-SP-C(2-12)H
    • H-SP-C(2-18)J
    • H-SP-C(2-8)L
    • H-SP-C(3-29)K
    • HW-AP-H
    • HW-AP-J
    • HW-AP-K
    • HW-AP-L
    • HW-APH-H
    • HW-APH-J
    • HW-APH-K
    • HW-APH-L
    • HW-PH-H
    • HW-PH-J
    • HW-PH-K
    • HW-PH-L
    • HW-SH-H
    • HW-SH-J
    • HW-SH-K
    • HW-SH-L
    • HW-SP-C(2-12)H
    • HW-SP-C(2-18)J
    • HW-SP-C(2-8)L
    • HW-SP-C(3-29)K
    • W-AP-H
    • W-AP-J
    • W-AP-K
    • W-AP-L
    • W-APH-H
    • W-APH-J
    • W-APH-K
    • W-APH-L
    • W-MP-H
    • W-MP-J
    • W-MP-K
    • W-MP-L
    • W-PH-H
    • W-PH-J
    • W-PH-K
    • W-PH-L
    • W-SH-H
    • W-SH-J
    • W-SH-K
    • W-SH-L
    • W-SP-C-H
    • W-SP-C-J
    • W-SP-C-K
    • W-SP-C-L
    • W-SP-H
    • W-SP-J
    • W-SP-K
    • W-SP-L

    Ripristina

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.