• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni da taglio in forme speciali / perno di forzatura / TiCN, HW, WPC

Punzoni da taglio in forme speciali / perno di forzatura / TiCN, HW, WPC

MISUMI

MISUMI

  • SKD11
  • POWDER HSS
  • TiCN
  • HW
  • WPC

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. Avanti >>
Codice componente
H-PJ3L5-[40-80/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L5-LC[37-79.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L6-[40-80/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L6-LC[37-79.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L8-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L8-LC[37-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L10-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L10-LC[37-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L13-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L13-LC[37-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L16-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L16-LC[37-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L20-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L20-LC[37-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L25-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-PJ3L25-LC[37-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
H-SJ-C3L10-[60-100/10]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
H-SJ-C3L10-LC[60.1-99.7/0.1]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
H-SJ-C3L13-[60-100/10]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
H-SJ-C3L13-LC[60.1-99.7/0.1]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
H-SJ-C3L16-[60-100/10]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
H-SJ-C3L16-LC[60.1-99.7/0.1]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
H-SJ-C3L20-[60-100/10]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
H-SJ-C3L20-LC[60.1-99.7/0.1]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
H-SJ-C3L25-[60-100/10]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
H-SJ-C3L25-LC[60.1-99.7/0.1]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
HW-PJ3L5-[40-80/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L5-LC[36-79.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L6-[40-80/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L6-LC[36-79.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L8-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L8-LC[36-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L10-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L10-LC[36-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L13-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L13-LC[36-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L16-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L16-LC[36-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L20-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L20-LC[36-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L25-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-PJ3L25-LC[36-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
HW-SJ-C3L10-[60-100/10]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
HW-SJ-C3L10-LC[60.1-99.7/0.1]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
HW-SJ-C3L13-[60-100/10]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
HW-SJ-C3L13-LC[60.1-99.7/0.1]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
HW-SJ-C3L16-[60-100/10]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
HW-SJ-C3L16-LC[60.1-99.7/0.1]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
HW-SJ-C3L20-[60-100/10]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
HW-SJ-C3L20-LC[60.1-99.7/0.1]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
HW-SJ-C3L25-[60-100/10]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
HW-SJ-C3L25-LC[60.1-99.7/0.1]-A[1-90/0.1]-R[0.2-47/0.01]-S[1-50/0.01]
W-PJ3L5-[40-80/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
W-PJ3L5-LC[36-79.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
W-PJ3L6-[40-80/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
W-PJ3L6-LC[36-79.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
W-PJ3L8-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
W-PJ3L8-LC[36-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
W-PJ3L10-[40-100/10]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
W-PJ3L10-LC[36-99.9/0.1]-A[1-90/0.1]-R[0.2-50/0.01]-S[0.2-50/0.01]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape Material Surface treatment Punch shank (mounting part) shape D (Outer diameter)
(mm) 		A
(mm) 		B
(mm) 		C
(mm) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		P
(mm) 		Q
(mm) 		R
(mm) 		S
(mm) 		W
(mm)

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard51 ～ 90--40 ～ 80---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard51 ～ 90---37 ～ 79.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard61 ～ 90--40 ～ 80---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard61 ～ 90---37 ～ 79.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard81 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard81 ～ 90---37 ～ 99.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard101 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard101 ～ 90---37 ～ 99.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard131 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard131 ～ 90---37 ～ 99.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard161 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard161 ～ 90---37 ～ 99.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard201 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard201 ～ 90---37 ～ 99.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard251 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelTiCNStandard251 ～ 90---37 ～ 99.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentTiCNWith locating dowel hole101 ～ 90--60 ～ 100---0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentTiCNWith locating dowel hole101 ～ 90---60.1 ～ 99.7--0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentTiCNWith locating dowel hole131 ～ 90--60 ～ 100---0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentTiCNWith locating dowel hole131 ～ 90---60.1 ～ 99.7--0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentTiCNWith locating dowel hole161 ～ 90--60 ～ 100---0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentTiCNWith locating dowel hole161 ～ 90---60.1 ～ 99.7--0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentTiCNWith locating dowel hole201 ～ 90--60 ～ 100---0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentTiCNWith locating dowel hole201 ～ 90---60.1 ～ 99.7--0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentTiCNWith locating dowel hole251 ～ 90--60 ～ 100---0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentTiCNWith locating dowel hole251 ～ 90---60.1 ～ 99.7--0.2 ～ 471 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard51 ～ 90--40 ～ 80---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard51 ～ 90---36 ～ 79.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard61 ～ 90--40 ～ 80---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard61 ～ 90---36 ～ 79.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard81 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard81 ～ 90---36 ～ 99.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard101 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard101 ～ 90---36 ～ 99.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard131 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard131 ～ 90---36 ～ 99.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard161 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard161 ～ 90---36 ～ 99.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard201 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard201 ～ 90---36 ～ 99.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard251 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelHW coatingStandard251 ～ 90---36 ～ 99.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentHW coatingWith locating dowel hole101 ～ 90--60 ～ 100---0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentHW coatingWith locating dowel hole101 ～ 90---60.1 ～ 99.7--0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentHW coatingWith locating dowel hole131 ～ 90--60 ～ 100---0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentHW coatingWith locating dowel hole131 ～ 90---60.1 ～ 99.7--0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentHW coatingWith locating dowel hole161 ～ 90--60 ～ 100---0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentHW coatingWith locating dowel hole161 ～ 90---60.1 ～ 99.7--0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentHW coatingWith locating dowel hole201 ～ 90--60 ～ 100---0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentHW coatingWith locating dowel hole201 ～ 90---60.1 ～ 99.7--0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentHW coatingWith locating dowel hole251 ～ 90--60 ～ 100---0.2 ～ 471 ～ 50-

-

1 Preventivo 103LSKD11 EquivalentHW coatingWith locating dowel hole251 ～ 90---60.1 ～ 99.7--0.2 ～ 471 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelWPCStandard51 ～ 90--40 ～ 80---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelWPCStandard51 ～ 90---36 ～ 79.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelWPCStandard61 ～ 90--40 ～ 80---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelWPCStandard61 ～ 90---36 ～ 79.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelWPCStandard81 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelWPCStandard81 ～ 90---36 ～ 99.9--0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelWPCStandard101 ～ 90--40 ～ 100---0.2 ～ 500.2 ～ 50-

-

1 Preventivo 103LPowdered high-speed steelWPCStandard101 ～ 90---36 ～ 99.9--0.2 ～ 500.2 ～ 50-

Loading...

  1. 1
  2. 2
  3. Avanti >>
 

Informazioni di base

Type Jector punch

Configura

Ripristina

100Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel

    Ripristina

  • Surface treatment

    • TiCN
    • HW coating
    • WPC

    Ripristina

  • Punch shank (mounting part) shape

    • Standard
    • With locating dowel hole

    Ripristina

  • D (Outer diameter)(mm)

    • 5
    • 6
    • 8
    • 10
    • 13
    • 16
    • 20
    • 25
    • 32
    • 38
    • 45

    Ripristina

  • A(mm)

     [1-90/0.1mmpezzi]

    Ripristina

  • B(mm)

     

    Ripristina

  • C(mm)

    • 0

     

    Ripristina

  • L (L dimension)(mm)

    • 40
    • 50
    • 60
    • 70
    • 80
    • 90
    • 100

     [40-120/10mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

    • LC

     [36-119.9/0.1mmpezzi]

    Ripristina

  • P(mm)

     

    Ripristina

  • Q(mm)

    • 0

     

    Ripristina

  • R(mm)

    • 0

     [0.2-50/0.01mmpezzi]

    Ripristina

  • S(mm)

    • 0

     [0.2-50/0.01mmpezzi]

    Ripristina

  • W(mm)

     

    Ripristina

  • Tipo

    • H-PJ(2-12)H
    • H-PJ(2-18)J
    • H-PJ(2-7)L
    • H-PJ(3-29)K
    • H-SJ-C(2-12)H
    • H-SJ-C(2-18)J
    • H-SJ-C(2-8)L
    • H-SJ-C(3-29)K
    • HW-PJ-H
    • HW-PJ-J
    • HW-PJ-K
    • HW-PJ-L
    • HW-SJ-C(2-12)H
    • HW-SJ-C(2-18)J
    • HW-SJ-C(2-8)L
    • HW-SJ-C(3-29)K
    • W-PJ-H
    • W-PJ-J
    • W-PJ-K
    • W-PJ-L
    • W-SJ-C-H
    • W-SJ-C-J
    • W-SJ-C-K
    • W-SJ-C-L
    • W-SJ-H
    • W-SJ-J
    • W-SJ-K
    • W-SJ-L

    Ripristina

  • Tip shape

    • 2H
    • 2J
    • 2L
    • 3J
    • 3K
    • 3L
    • 4H
    • 4J
    • 4K
    • 4L
    • 5H
    • 5J
    • 5L
    • 6H
    • 6K
    • 7H
    • 7L
    • 8H
    • 8J
    • 8K
    • 8L
    • 9H
    • 9J
    • 9K
    • 10H
    • 11H
    • 11J
    • 12H
    • 12J
    • 13K
    • 14J
    • 14K
    • 15J
    • 15K
    • 16J
    • 17J
    • 17K
    • 18J
    • 20K
    • 21K
    • 22K
    • 23K
    • 25K
    • 27K
    • 28K
    • 29K

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.