• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Perni di espulsione / testa appiattita su un lato / HSS / superficie incisa / diametro dell'albero, lunghezza configurabile

Perni di espulsione / testa appiattita su un lato / HSS / superficie incisa / diametro dell'albero, lunghezza configurabile

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. 3
  4. Avanti >>
Codice componente
EPHBE1M0.6-[40-100/0.01]-P[0.6-0.99/0.01]-*
EPHBE1M1-[40-150/0.01]-P[0.6-0.99/0.01]-*
EPHBE1M1.5-[40-250/0.01]-P[1-1.49/0.01]-*
EPHBE1M2-[40-250/0.01]-P[1.5-1.99/0.01]-*
EPHBE1M2.5-[40-250/0.01]-P[2-2.49/0.01]-*
EPHBE1M3-[40-250/0.01]-P[2.5-2.99/0.01]-*
EPHBE1M3.5-[40-250/0.01]-P[3-3.49/0.01]-*
EPHBE1M4-[40-250/0.01]-P[3.5-3.99/0.01]-*
EPHBE1M4.5-[40-250/0.01]-P[4-4.49/0.01]-*
EPHBE1M5-[40-250/0.01]-P[4.5-4.99/0.01]-*
EPHBE1M5.5-[40-250/0.01]-P[5-5.49/0.01]-*
EPHBE1M6-[40-250/0.01]-P[5.5-5.99/0.01]-*
EPHBE1M6.5-[40-250/0.01]-P[6-6.49/0.01]-*
EPHBE1M7-[40-250/0.01]-P[6.5-6.99/0.01]-*
EPHBE1M8-[40-250/0.01]-P[7-7.99/0.01]-*
EPHBE1M10-[40-250/0.01]-P[8-9.99/0.01]-*
EPHBE1M12-[40-250/0.01]-P[10-11.99/0.01]-*
EPHBE1MR0.6-[40-150/0.01]-P[0.4-0.59/0.01]-*
EPHBE1MR1-[40-150/0.01]-P[0.6-0.99/0.01]-*
EPHBE1MR1.5-[40-200/0.01]-P[1-1.49/0.01]-*
EPHBE1MR2-[40-250/0.01]-P[1.5-1.99/0.01]-*
EPHBE1MR2.5-[40-250/0.01]-P[2-2.49/0.01]-*
EPHBE1MR3-[40-250/0.01]-P[2.5-2.99/0.01]-*
EPHBE1MR3.5-[40-250/0.01]-P[3-3.49/0.01]-*
EPHBE1MR4-[40-250/0.01]-P[3.5-3.99/0.01]-*
EPHBE1MR4.5-[40-250/0.01]-P[4-4.49/0.01]-*
EPHBE1MR5-[40-250/0.01]-P[4.5-4.99/0.01]-*
EPHBE1MR5.5-[40-250/0.01]-P[5-5.49/0.01]-*
EPHBE1MR6-[40-250/0.01]-P[5.5-5.99/0.01]-*
EPHBE1MR6.5-[40-250/0.01]-P[6-6.49/0.01]-*
EPHBE1MR7-[40-250/0.01]-P[6.5-6.99/0.01]-*
EPHBE1MR8-[40-250/0.01]-P[7-7.99/0.01]-*
EPHBE1MR10-[40-250/0.01]-P[8-9.99/0.01]-*
EPHBE1MR12-[40-250/0.01]-P[10-11.99/0.01]-*
EPHBE2M2-[40-250/0.01]-P[1.5-1.99/0.01]-**
EPHBE2M2.5-[40-250/0.01]-P[2-2.49/0.01]-**
EPHBE2M3-[40-250/0.01]-P[2.5-2.99/0.01]-**
EPHBE2M3.5-[40-250/0.01]-P[3-3.49/0.01]-**
EPHBE2M4-[40-250/0.01]-P[3.5-3.99/0.01]-**
EPHBE2M4.5-[40-250/0.01]-P[4-4.49/0.01]-**
EPHBE2M5-[40-250/0.01]-P[4.5-4.99/0.01]-**
EPHBE2M5.5-[40-250/0.01]-P[5-5.49/0.01]-**
EPHBE2M6-[40-250/0.01]-P[5.5-5.99/0.01]-**
EPHBE2M6.5-[40-250/0.01]-P[6-6.49/0.01]-**
EPHBE2M7-[40-250/0.01]-P[6.5-6.99/0.01]-**
EPHBE2M8-[40-250/0.01]-P[7-7.99/0.01]-**
EPHBE2M10-[40-250/0.01]-P[8-9.99/0.01]-**
EPHBE2M12-[40-250/0.01]-P[10-11.99/0.01]-**
EPHBE2MR2-[40-250/0.01]-P[1.5-1.99/0.01]-**
EPHBE2MR2.5-[40-250/0.01]-P[2-2.49/0.01]-**
EPHBE2MR3-[40-250/0.01]-P[2.5-2.99/0.01]-**
EPHBE2MR3.5-[40-250/0.01]-P[3-3.49/0.01]-**
EPHBE2MR4-[40-250/0.01]-P[3.5-3.99/0.01]-**
EPHBE2MR4.5-[40-250/0.01]-P[4-4.49/0.01]-**
EPHBE2MR5-[40-250/0.01]-P[4.5-4.99/0.01]-**
EPHBE2MR5.5-[40-250/0.01]-P[5-5.49/0.01]-**
EPHBE2MR6-[40-250/0.01]-P[5.5-5.99/0.01]-**
EPHBE2MR6.5-[40-250/0.01]-P[6-6.49/0.01]-**
EPHBE2MR7-[40-250/0.01]-P[6.5-6.99/0.01]-**
EPHBE2MR8-[40-250/0.01]-P[7-7.99/0.01]-**
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSShaft diameter tolerance (Reference tolerance) L dimension tolerance (Reference tolerance) Head thickness D/P (Shaft diameter)
(mm) 		Character engraving type Number of engraving characters No. (Nominal diameter)
(mm) 		L (L dimension)
(mm) 		Engraving character designation
1 Preventivo 10-0.01/-0.02+0.02/04mm(T4)0.6 ～ 0.99Concave character1 characters0.640 ～ 100※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/04mm(T4)0.6 ～ 0.99Concave character1 characters140 ～ 150※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/04mm(T4)1 ～ 1.49Concave character1 characters1.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)1.5 ～ 1.99Concave character1 characters240 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)2 ～ 2.49Concave character1 characters2.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)2.5 ～ 2.99Concave character1 characters340 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3 ～ 3.49Concave character1 characters3.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3.5 ～ 3.99Concave character1 characters440 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4 ～ 4.49Concave character1 characters4.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4.5 ～ 4.99Concave character1 characters540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5 ～ 5.49Concave character1 characters5.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5.5 ～ 5.99Concave character1 characters640 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6 ～ 6.49Concave character1 characters6.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6.5 ～ 6.99Concave character1 characters740 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)7 ～ 7.99Concave character1 characters840 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)8 ～ 9.99Concave character1 characters1040 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)10 ～ 11.99Concave character1 characters1240 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/04mm(T4)0.4 ～ 0.59Concave character (Sequential numbering)1 characters0.640 ～ 150※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/04mm(T4)0.6 ～ 0.99Concave character (Sequential numbering)1 characters140 ～ 150※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/04mm(T4)1 ～ 1.49Concave character (Sequential numbering)1 characters1.540 ～ 200※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)1.5 ～ 1.99Concave character (Sequential numbering)1 characters240 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)2 ～ 2.49Concave character (Sequential numbering)1 characters2.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)2.5 ～ 2.99Concave character (Sequential numbering)1 characters340 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3 ～ 3.49Concave character (Sequential numbering)1 characters3.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3.5 ～ 3.99Concave character (Sequential numbering)1 characters440 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4 ～ 4.49Concave character (Sequential numbering)1 characters4.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4.5 ～ 4.99Concave character (Sequential numbering)1 characters540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5 ～ 5.49Concave character (Sequential numbering)1 characters5.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5.5 ～ 5.99Concave character (Sequential numbering)1 characters640 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6 ～ 6.49Concave character (Sequential numbering)1 characters6.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6.5 ～ 6.99Concave character (Sequential numbering)1 characters740 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)7 ～ 7.99Concave character (Sequential numbering)1 characters840 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)8 ～ 9.99Concave character (Sequential numbering)1 characters1040 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)10 ～ 11.99Concave character (Sequential numbering)1 characters1240 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)1.5 ～ 1.99Concave character2 characters240 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)2 ～ 2.49Concave character2 characters2.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)2.5 ～ 2.99Concave character2 characters340 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3 ～ 3.49Concave character2 characters3.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3.5 ～ 3.99Concave character2 characters440 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4 ～ 4.49Concave character2 characters4.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4.5 ～ 4.99Concave character2 characters540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5 ～ 5.49Concave character2 characters5.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5.5 ～ 5.99Concave character2 characters640 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6 ～ 6.49Concave character2 characters6.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6.5 ～ 6.99Concave character2 characters740 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)7 ～ 7.99Concave character2 characters840 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)8 ～ 9.99Concave character2 characters1040 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)10 ～ 11.99Concave character2 characters1240 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)1.5 ～ 1.99Concave character (Sequential numbering)2 characters240 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)2 ～ 2.49Concave character (Sequential numbering)2 characters2.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)2.5 ～ 2.99Concave character (Sequential numbering)2 characters340 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3 ～ 3.49Concave character (Sequential numbering)2 characters3.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3.5 ～ 3.99Concave character (Sequential numbering)2 characters440 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4 ～ 4.49Concave character (Sequential numbering)2 characters4.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4.5 ～ 4.99Concave character (Sequential numbering)2 characters540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5 ～ 5.49Concave character (Sequential numbering)2 characters5.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5.5 ～ 5.99Concave character (Sequential numbering)2 characters640 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6 ～ 6.49Concave character (Sequential numbering)2 characters6.540 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6.5 ～ 6.99Concave character (Sequential numbering)2 characters740 ～ 250※Designation by WOS
1 Preventivo 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)7 ～ 7.99Concave character (Sequential numbering)2 characters840 ～ 250※Designation by WOS

Loading...

  1. 1
  2. 2
  3. 3
  4. Avanti >>
 

Informazioni di base

Shape type With engraving Material SKH51 Surface treatment No
Tip shape No Gas release shape No

Configura

Ripristina

161Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • L dimension tolerance (Reference tolerance)

    • +0.02/0
    • +0.02/0 or +0.05/0

    Ripristina

  • Head thickness

    • 4mm(T4)
    • 6mm(JIS)
    • 8mm(JIS)

    Ripristina

  • D/P (Shaft diameter)(mm)

     [0.4-11.99/0.01mmpezzi]

    Ripristina

  • Character engraving type

    • Concave character
    • Concave character (Sequential numbering)

    Ripristina

  • Number of engraving characters

    • 1 characters
    • 2 characters
    • 3 characters
    • 4 characters
    • 5 characters

    Ripristina

  • No. (Nominal diameter)(mm)

    • 0.6
    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 8
    • 10
    • 12

    Ripristina

  • L (L dimension)(mm)

     [40-250/0.01mmpezzi]

    Ripristina

  • Engraving character designation

    • ※Designation by WOS

    Ripristina

  • Tipo

    • EPHB1M
    • EPHB1MR
    • EPHB2M
    • EPHB2MR
    • EPHB3M
    • EPHB4M
    • EPHB5M
    • EPHBE1M
    • EPHBE1MR
    • EPHBE2M
    • EPHBE2MR
    • EPHBE3M
    • EPHBE4M
    • EPHBE5M
    • EPHJB1M
    • EPHJB1MR
    • EPHJB2M
    • EPHJB2MR
    • EPHJB3M
    • EPHJB4M
    • EPHJB5M
    • EPHJBE1M
    • EPHJBE1MR
    • EPHJBE2M
    • EPHJBE2MR
    • EPHJBE3M
    • EPHJBE4M
    • EPHJBE5M

    Ripristina

  • Shaft diameter tolerance (Reference tolerance)

    • -0.01/-0.02
    • 0/-0.005

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.