• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Perni di espulsione / testa appiattita su un lato / EN 1.3343 Equiv. / a gradini / superficie incisa convessa / diametro della punta, lunghezza configurabile

Perni di espulsione / testa appiattita su un lato / EN 1.3343 Equiv. / a gradini / superficie incisa convessa / diametro della punta, lunghezza configurabile

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
EHSF3M3-[40-250/0.01]-P[2.8-2.9/0.01]-N[15-235/1]-***
EHSF3M3.5-[40-250/0.01]-P[2.8-3.4/0.01]-N[15-230/1]-***
EHSF3M4-[40-250/0.01]-P[2.8-3.9/0.01]-N[15-230/1]-***
EHSF3M4.5-[40-250/0.01]-P[2.8-4.4/0.01]-N[15-230/1]-***
EHSF3M5-[40-250/0.01]-P[3-4.9/0.01]-N[15-230/1]-***
EHSF3M5.5-[40-250/0.01]-P[3.5-5.4/0.01]-N[15-230/1]-***
EHSF3M6-[40-250/0.01]-P[4-5.9/0.01]-N[15-230/1]-***
EHSF3M6.5-[40-250/0.01]-P[4.5-6.4/0.01]-N[15-230/1]-***
EHSF3M7-[40-250/0.01]-P[4.9-6.9/0.01]-N[15-230/1]-***
EHSF3M8-[40-250/0.01]-P[5.9-7.9/0.01]-N[15-230/1]-***
EHSF3M9-[40-250/0.01]-P[6.9-8.9/0.01]-N[15-230/1]-***
EHSF3M10-[40-250/0.01]-P[7.9-9.9/0.01]-N[15-230/1]-***
EHSF3M12-[40-250/0.01]-P[8.9-11.9/0.01]-N[15-230/1]-***
EHSFE3M3-[40-250/0.01]-P[2.8-2.9/0.01]-N[15-235/1]-***
EHSFE3M3.5-[40-250/0.01]-P[2.8-3.4/0.01]-N[15-230/1]-***
EHSFE3M4-[40-250/0.01]-P[2.8-3.9/0.01]-N[15-230/1]-***
EHSFE3M4.5-[40-250/0.01]-P[2.8-4.4/0.01]-N[15-230/1]-***
EHSFE3M5-[40-250/0.01]-P[3-4.9/0.01]-N[15-230/1]-***
EHSFE3M5.5-[40-250/0.01]-P[3.5-5.4/0.01]-N[15-230/1]-***
EHSFE3M6-[40-250/0.01]-P[4-5.9/0.01]-N[15-230/1]-***
EHSFE3M6.5-[40-250/0.01]-P[4.5-6.4/0.01]-N[15-230/1]-***
EHSFE3M7-[40-250/0.01]-P[4.9-6.9/0.01]-N[15-230/1]-***
EHSFE3M8-[40-250/0.01]-P[5.9-7.9/0.01]-N[15-230/1]-***
EHSFE3M9-[40-250/0.01]-P[6.9-8.9/0.01]-N[15-230/1]-***
EHSFE3M10-[40-250/0.01]-P[7.9-9.9/0.01]-N[15-230/1]-***
EHSFE3M12-[40-250/0.01]-P[8.9-11.9/0.01]-N[15-230/1]-***
EHSJF3M4-[50-250/0.01]-P[2.8-3.9/0.01]-N[30-230/1]-***
EHSJF3M4.5-[50-250/0.01]-P[2.8-4.4/0.01]-N[30-230/1]-***
EHSJF3M5-[50-250/0.01]-P[3-4.9/0.01]-N[30-230/1]-***
EHSJF3M5.5-[50-250/0.01]-P[3.5-5.4/0.01]-N[30-230/1]-***
EHSJF3M6-[50-250/0.01]-P[4-5.9/0.01]-N[30-230/1]-***
EHSJF3M6.5-[50-250/0.01]-P[4.5-6.4/0.01]-N[30-230/1]-***
EHSJF3M7-[50-250/0.01]-P[4.9-6.9/0.01]-N[30-230/1]-***
EHSJF3M8-[50-250/0.01]-P[5.9-7.9/0.01]-N[30-230/1]-***
EHSJF3M9-[50-250/0.01]-P[6.9-8.9/0.01]-N[15-230/1]-***
EHSJF3M10-[50-250/0.01]-P[7.9-9.9/0.01]-N[30-230/1]-***
EHSJF3M12-[50-250/0.01]-P[8.9-11.9/0.01]-N[30-230/1]-***
EHSJFE3M4-[50-250/0.01]-P[2.8-3.9/0.01]-N[30-230/1]-***
EHSJFE3M4.5-[50-250/0.01]-P[2.8-4.4/0.01]-N[30-230/1]-***
EHSJFE3M5-[50-250/0.01]-P[3-4.9/0.01]-N[30-230/1]-***
EHSJFE3M5.5-[50-250/0.01]-P[3.5-5.4/0.01]-N[30-230/1]-***
EHSJFE3M6-[50-250/0.01]-P[4-5.9/0.01]-N[30-230/1]-***
EHSJFE3M6.5-[50-250/0.01]-P[4.5-6.4/0.01]-N[30-230/1]-***
EHSJFE3M7-[50-250/0.01]-P[4.9-6.9/0.01]-N[30-230/1]-***
EHSJFE3M8-[50-250/0.01]-P[5.9-7.9/0.01]-N[30-230/1]-***
EHSJFE3M9-[50-250/0.01]-P[6.9-8.9/0.01]-N[15-230/1]-***
EHSJFE3M10-[50-250/0.01]-P[7.9-9.9/0.01]-N[30-230/1]-***
EHSJFE3M12-[50-250/0.01]-P[8.9-11.9/0.01]-N[30-230/1]-***
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip diameter tolerance (Reference tolerance) Head thickness D (Shaft diameter)
(mm) 		P (Tip diameter)
(mm) 		Character engraving type Number of engraving characters L (L dimension)
(mm) 		N
(mm) 		# Characters for engraving
(Number designation) 		Engraving character designation Engraving character selection
1 Preventivo 100/-0.0054mm(T4)32.8 ～ 2.9Concave character3 characters40 ～ 25015 ～ 235--※Designation by WOS-
1 Preventivo 100/-0.0054mm(T4)3.52.8 ～ 3.4Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0054mm(T4)42.8 ～ 3.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0054mm(T4)4.52.8 ～ 4.4Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0054mm(T4)53 ～ 4.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0054mm(T4)5.53.5 ～ 5.4Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0054mm(T4)64 ～ 5.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0054mm(T4)6.54.5 ～ 6.4Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0054mm(T4)74.9 ～ 6.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0054mm(T4)85.9 ～ 7.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0054mm(T4)96.9 ～ 8.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0054mm(T4)107.9 ～ 9.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0054mm(T4)128.9 ～ 11.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.024mm(T4)32.8 ～ 2.9Concave character3 characters40 ～ 25015 ～ 235--※Designation by WOS-
1 Preventivo 10-0.01/-0.024mm(T4)3.52.8 ～ 3.4Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.024mm(T4)42.8 ～ 3.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.024mm(T4)4.52.8 ～ 4.4Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.024mm(T4)53 ～ 4.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.024mm(T4)5.53.5 ～ 5.4Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.024mm(T4)64 ～ 5.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.024mm(T4)6.54.5 ～ 6.4Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.024mm(T4)74.9 ～ 6.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.024mm(T4)85.9 ～ 7.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.024mm(T4)96.9 ～ 8.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.024mm(T4)107.9 ～ 9.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.024mm(T4)128.9 ～ 11.9Concave character3 characters40 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0056mm(JIS)42.8 ～ 3.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0056mm(JIS)4.52.8 ～ 4.4Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0056mm(JIS)53 ～ 4.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0056mm(JIS)5.53.5 ～ 5.4Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0056mm(JIS)64 ～ 5.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0056mm(JIS)6.54.5 ～ 6.4Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0056mm(JIS)74.9 ～ 6.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0058mm(JIS)85.9 ～ 7.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0058mm(JIS)96.9 ～ 8.9Concave character3 characters50 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0058mm(JIS)107.9 ～ 9.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 100/-0.0058mm(JIS)128.9 ～ 11.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.026mm(JIS)42.8 ～ 3.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.026mm(JIS)4.52.8 ～ 4.4Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.026mm(JIS)53 ～ 4.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.026mm(JIS)5.53.5 ～ 5.4Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.026mm(JIS)64 ～ 5.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.026mm(JIS)6.54.5 ～ 6.4Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.026mm(JIS)74.9 ～ 6.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.028mm(JIS)85.9 ～ 7.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.028mm(JIS)96.9 ～ 8.9Concave character3 characters50 ～ 25015 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.028mm(JIS)107.9 ～ 9.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-
1 Preventivo 10-0.01/-0.028mm(JIS)128.9 ～ 11.9Concave character3 characters50 ～ 25030 ～ 230--※Designation by WOS-

Loading...

  1. 1
 

Informazioni di base

Material EN 1.3343 Equiv. Shaft diameter tolerance (Reference tolerance) 0/-0.02 Surface treatment No
Tip shape No Gas release shape No

Configura

Ripristina

48Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Tip diameter tolerance (Reference tolerance)

    • 0/-0.005
    • -0.01/-0.02

    Ripristina

  • Head thickness

    • 4mm(T4)
    • 6mm(JIS)
    • 8mm(JIS)

    Ripristina

  • D (Shaft diameter)(mm)

    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 8
    • 9
    • 10
    • 12

    Ripristina

  • P (Tip diameter)(mm)

     [2.8-11.9/0.01mmpezzi]

    Ripristina

  • Character engraving type

    • Concave character
    • Concave character (Sequential numbering)

    Ripristina

  • L (L dimension)(mm)

     [40-250/0.01mmpezzi]

    Ripristina

  • N(mm)

     [15-235/1mmpezzi]

    Ripristina

  • #

    • #

    Ripristina

  • Characters for engraving(Number designation)

     

    Ripristina

  • Engraving character designation

    • ※Designation by WOS

    Ripristina

  • Engraving character selection

    • % (Space)
    • &
    • +
    • <
    • >
    • @
    • A
    • B
    • C
    • D
    • E
    • F
    • G
    • H
    • I
    • J
    • K
    • L
    • M
    • N
    • O
    • P
    • Q
    • R
    • S
    • T
    • U
    • V
    • W
    • X
    • Y
    • Z
    • \\(/)

    Ripristina

  • Tipo

    • EHSF1M
    • EHSF1MR
    • EHSF2M
    • EHSF2MR
    • EHSF3M
    • EHSF4M
    • EHSF5M
    • EHSFE1M
    • EHSFE1MR
    • EHSFE2M
    • EHSFE2MR
    • EHSFE3M
    • EHSFE4M
    • EHSFE5M
    • EHSJF1M
    • EHSJF1MR
    • EHSJF2M
    • EHSJF2MR
    • EHSJF3M
    • EHSJF4M
    • EHSJF5M
    • EHSJFE1M
    • EHSJFE1MR
    • EHSJFE2M
    • EHSJFE2MR
    • EHSJFE3M
    • EHSJFE4M
    • EHSJFE5M

    Ripristina

  • Number of engraving characters

    • 1 characters
    • 2 characters
    • 3 characters
    • 4 characters
    • 5 characters

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.