Perni di contorno / cilindrici / HSS, acciaio per utensili / d 0,005, L 0,01 mm / a gradini / forma a D/quadrata / forma della faccia selezionabile
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
- Disegno
- Anteprima 3D L'anteprima 3D è disponibile dopo la configurazione completa
- Codici componente
- Catalogo
Codice componente:
- Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | RoHS | Shaft diameter tolerance | L dimension tolerance | Tip gradient tolerance | D/P (Shaft diameter) (mm) | Step (Step shape of the first step) | Shape (Tip shape) | No. (Nominal diameter) (mm) | Cutting facets (facet) | A (Step shape diameter) (mm) | C (Step type taper width) (mm) | CVC (Designation of C dimension in increments of 0.01mm) (mm) | E (Facet cutting depth) (mm) | F (Bearing bore length) (mm) | G (Tip C chamfering width) (mm) | K (Tip angle) (°) | L (L dimension) (mm) | Q (Tip R chamfering) (mm) | S (Tip tapered width) (mm) | V (Tip diameter) (mm) | VC (V dimension alteration (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 1 | 1B | No processing | - | 1 faces | 0.4 ～ 0.99 | - | - | 0.02 ～ 0.05 | 25 ～ 99.3 | - | - | 16.5 ～ 100 | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 1 | 1B | No processing | - | 1 faces | 0.4 ～ 0.99 | - | - | 0.02 ～ 0.05 | 25 ～ 99.3 | - | - | 16.5 ～ 100 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 1.5 | 1B | No processing | - | 1 faces | 0.4 ～ 1.49 | - | - | 0.02 ～ 0.05 | 25 ～ 99 | - | - | 16.5 ～ 100 | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 1.5 | 1B | No processing | - | 1 faces | 0.4 ～ 1.49 | - | - | 0.02 ～ 0.05 | 25 ～ 99 | - | - | 16.5 ～ 100 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 2 | 1B | No processing | - | 1 faces | 0.5 ～ 1.99 | - | - | 0.02 ～ 0.05 | 25 ～ 99 | - | - | 16.5 ～ 100 | - | - | 0.5 ～ 1.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 2.5 | 1B | No processing | - | 1 faces | 0.5 ～ 2.49 | - | - | 0.02 ～ 0.05 | 25 ～ 99 | - | - | 16.5 ～ 100 | - | - | 0.5 ～ 2.49 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 3 | 1B | No processing | - | 1 faces | 0.7 ～ 2.99 | - | - | 0.02 ～ 0.05 | 25 ～ 99 | - | - | 16.5 ～ 100 | - | - | 0.7 ～ 2.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 | 1B | No processing | - | 1 faces | 0.7 ～ 3.49 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | - | - | 16.5 ～ 120 | - | - | 1 ～ 3.49 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 | 1B | No processing | - | 1 faces | 0.7 ～ 3.49 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | - | - | 16.5 ～ 120 | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 4 | 1B | No processing | - | 1 faces | 0.7 ～ 3.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | - | - | 16.5 ～ 120 | - | - | 1 ～ 3.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 4 | 1B | No processing | - | 1 faces | 0.7 ～ 3.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | - | - | 16.5 ～ 120 | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 4.5 | 1B | No processing | - | 1 faces | 1 ～ 4.49 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | - | - | 16.5 ～ 120 | - | - | 1 ～ 4.49 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 5 | 1B | No processing | - | 1 faces | 1 ～ 4.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | - | - | 16.5 ～ 120 | - | - | 1 ～ 4.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 5.5 | 1B | No processing | - | 1 faces | 1 ～ 5.49 | - | - | 0.02 ～ 0.05 | 25 ～ 149.3 | - | - | 16.5 ～ 120 | - | - | 1.5 ～ 5.49 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 5.5 | 1B | No processing | - | 1 faces | 1 ～ 5.49 | - | - | 0.02 ～ 0.05 | 25 ～ 149.3 | - | - | 16.5 ～ 120 | - | - | - | 1 ～ 1.49 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 6 | 1B | No processing | - | 1 faces | 1.5 ～ 5.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | - | - | 16.5 ～ 120 | - | - | 2 ～ 5.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 6 | 1B | No processing | - | 1 faces | 1.5 ～ 5.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | - | - | 16.5 ～ 120 | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 7 | 1B | No processing | - | 1 faces | 1.5 ～ 6.99 | - | - | 0.02 ～ 0.05 | 25 ～ 149.3 | - | - | 16.5 ～ 120 | - | - | 2 ～ 6.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 7 | 1B | No processing | - | 1 faces | 1.5 ～ 6.99 | - | - | 0.02 ～ 0.05 | 25 ～ 149.3 | - | - | 16.5 ～ 120 | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 8 | 1B | No processing | - | 1 faces | 1.5 ～ 7.99 | - | - | 0.02 ～ 0.05 | 25 ～ 149.3 | - | - | 16.5 ～ 120 | - | - | 2 ～ 7.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 8 | 1B | No processing | - | 1 faces | 1.5 ～ 7.99 | - | - | 0.02 ～ 0.05 | 25 ～ 149.3 | - | - | 16.5 ～ 120 | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 10 | 1B | No processing | - | 1 faces | 1.5 ～ 9.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | - | - | 16.5 ～ 120 | - | - | 2 ～ 9.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 10 | 1B | No processing | - | 1 faces | 1.5 ～ 9.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | - | - | 16.5 ～ 120 | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 13 | 1B | No processing | - | 1 faces | 2 ～ 12.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | - | - | 16.5 ～ 120 | - | - | 2 ～ 12.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 1 | 1B | B | - | 1 faces | 0.4 ～ 0.99 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | - | - | 16.5 ～ 100 | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 1 | 1B | B | - | 1 faces | 0.4 ～ 0.99 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | - | - | 16.5 ～ 100 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 1.5 | 1B | B | - | 1 faces | 0.4 ～ 1.49 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | - | - | 16.5 ～ 100 | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 1.5 | 1B | B | - | 1 faces | 0.4 ～ 1.49 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | - | - | 16.5 ～ 100 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 2 | 1B | B | - | 1 faces | 0.5 ～ 1.99 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | - | - | 16.5 ～ 100 | - | - | 0.5 ～ 1.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 2.5 | 1B | B | - | 1 faces | 0.5 ～ 2.49 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | - | - | 16.5 ～ 100 | - | - | 0.5 ～ 2.49 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 3 | 1B | B | - | 1 faces | 0.7 ～ 2.99 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | - | - | 16.5 ～ 100 | - | - | 0.7 ～ 2.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 3.5 | 1B | B | - | 1 faces | 0.7 ～ 3.49 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 150 | - | - | 1 ～ 3.49 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 3.5 | 1B | B | - | 1 faces | 0.7 ～ 3.49 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 150 | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 4 | 1B | B | - | 1 faces | 0.7 ～ 3.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | 1 ～ 3.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 4 | 1B | B | - | 1 faces | 0.7 ～ 3.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 4.5 | 1B | B | - | 1 faces | 1 ～ 4.49 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | 1 ～ 4.49 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 5 | 1B | B | - | 1 faces | 1 ～ 4.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | 1 ～ 4.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 5.5 | 1B | B | - | 1 faces | 1 ～ 5.49 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | 1.5 ～ 5.49 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 5.5 | 1B | B | - | 1 faces | 1 ～ 5.49 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | - | 1 ～ 1.49 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 6 | 1B | B | - | 1 faces | 1.5 ～ 5.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | 2 ～ 5.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 6 | 1B | B | - | 1 faces | 1.5 ～ 5.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 7 | 1B | B | - | 1 faces | 1.5 ～ 6.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | 2 ～ 6.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 7 | 1B | B | - | 1 faces | 1.5 ～ 6.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 8 | 1B | B | - | 1 faces | 1.5 ～ 7.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | 2 ～ 7.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 8 | 1B | B | - | 1 faces | 1.5 ～ 7.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 10 | 1B | B | - | 1 faces | 1.5 ～ 9.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | 2 ～ 9.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 10 | 1B | B | - | 1 faces | 1.5 ～ 9.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | 0/-0.1 | ±0.01 | 13 | 1B | B | - | 1 faces | 2 ～ 12.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.7 | - | - | 16.5 ～ 120 | - | - | 2 ～ 12.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 1 | 1B | C | - | 1 faces | 0.4 ～ 0.99 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | 0.3 ～ 0.4 | - | 16.5 ～ 100 | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 1 | 1B | C | - | 1 faces | 0.4 ～ 0.99 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | 0.3 ～ 0.4 | - | 16.5 ～ 100 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 1.5 | 1B | C | - | 1 faces | 0.4 ～ 1.49 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | 0.5 ～ 0.7 | - | 16.5 ～ 100 | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 1.5 | 1B | C | - | 1 faces | 0.4 ～ 1.49 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | 0.5 ～ 0.7 | - | 16.5 ～ 100 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 2 | 1B | C | - | 1 faces | 0.5 ～ 1.99 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | 0.5 ～ 0.9 | - | 16.5 ～ 100 | - | - | 0.5 ～ 1.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 2.5 | 1B | C | - | 1 faces | 0.5 ～ 2.49 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | 0.5 ～ 1.2 | - | 16.5 ～ 100 | - | - | 0.5 ～ 2.49 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 3 | 1B | C | - | 1 faces | 0.7 ～ 2.99 | - | - | 0.02 ～ 0.05 | 25 ～ 99.5 | 0.5 ～ 1.4 | - | 16.5 ～ 100 | - | - | 0.7 ～ 2.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 | 1B | C | - | 1 faces | 0.7 ～ 3.49 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | 0.5 ～ 1.7 | - | 16.5 ～ 120 | - | - | 1 ～ 3.49 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 | 1B | C | - | 1 faces | 0.7 ～ 3.49 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | 0.5 ～ 1.7 | - | 16.5 ～ 120 | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 4 | 1B | C | - | 1 faces | 0.7 ～ 3.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | 0.5 ～ 1.9 | - | 16.5 ～ 120 | - | - | 1 ～ 3.99 | - | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 4 | 1B | C | - | 1 faces | 0.7 ～ 3.99 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | 0.5 ～ 1.9 | - | 16.5 ～ 120 | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Preventivo | 10 | 0/-0.005 | +0.02/0 | ±0.01 | 4.5 | 1B | C | - | 1 faces | 1 ～ 4.49 | - | - | 0.02 ～ 0.05 | 25 ～ 119.5 | 0.5 ～ 2.2 | - | 16.5 ～ 120 | - | - | 1 ～ 4.49 | - |
Loading...
Informazioni di base
| Shape type | One-step gas release | Material | SKH51 | Surface treatment | No |
|---|---|---|---|---|---|
| Head thickness | 4mm(T4) | Step (Step shape of the second step) | No second step |
Configura
Proprietà di base
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
L dimension tolerance
- +0.01/0
- +0.02/0
- 0/-0.1
-
D/P (Shaft diameter)(mm)
[0.8-0.99/0.01mmpezzi][5.5-6.99/0.01mmpezzi][1-12.995/0.005mmpezzi]
-
Step (Step shape of the first step)
- 1B
- 1C
- 1D
-
Shape (Tip shape)
- No processing
- C
- G
- T
- R
- B
-
No. (Nominal diameter)(mm)
-
Cutting facets(facet)
- 1 faces
- 4 faces
-
A (Step shape diameter)(mm)
-
C (Step type taper width)(mm)
-
CVC (Designation of C dimension in increments of 0.01mm)(mm)
-
E (Facet cutting depth)(mm)
-
F (Bearing bore length)(mm)
-
G (Tip C chamfering width)(mm)
-
K (Tip angle)(°)
-
L (L dimension)(mm)
-
Q (Tip R chamfering)(mm)
-
S (Tip tapered width)(mm)
-
V (Tip diameter)(mm)
-
VC (V dimension alteration(mm)
-
Tipo
- GW-CPH-1B
- GW-CPH-1BB
- GW-CPH-1BC
- GW-CPH-1BG
- GW-CPH-1BR
- GW-CPH-1BT
- GW-CPH-1C
- GW-CPH-1CB
- GW-CPH-1CC
- GW-CPH-1CG
- GW-CPH-1CR
- GW-CPH-1CT
- GW-CPH-1D
- GW-CPH-1DB
- GW-CPH-1DC
- GW-CPH-1DG
- GW-CPH-1DR
- GW-CPH-1DT
- GW-CPHB-1B
- GW-CPHB-1BB
- GW-CPHB-1BC
- GW-CPHB-1BG
- GW-CPHB-1BR
- GW-CPHB-1BT
- GW-CPHB-1C
- GW-CPHB-1CB
- GW-CPHB-1CC
- GW-CPHB-1CG
- GW-CPHB-1CR
- GW-CPHB-1CT
- GW-CPHB-1D
- GW-CPHB-1DB
- GW-CPHB-1DC
- GW-CPHB-1DG
- GW-CPHB-1DR
- GW-CPHB-1DT
- GW-CPV-1B
- GW-CPV-1BB
- GW-CPV-1BC
- GW-CPV-1BG
- GW-CPV-1BR
- GW-CPV-1BT
- GW-CPV-1C
- GW-CPV-1CB
- GW-CPV-1CC
- GW-CPV-1CG
- GW-CPV-1CR
- GW-CPV-1CT
- GW-CPV-1D
- GW-CPV-1DB
- GW-CPV-1DC
- GW-CPV-1DG
- GW-CPV-1DR
- GW-CPV-1DT
- GW-CPVB-1B
- GW-CPVB-1BB
- GW-CPVB-1BC
- GW-CPVB-1BG
- GW-CPVB-1BR
- GW-CPVB-1BT
- GW-CPVB-1C
- GW-CPVB-1CB
- GW-CPVB-1CC
- GW-CPVB-1CG
- GW-CPVB-1CR
- GW-CPVB-1CT
- GW-CPVB-1D
- GW-CPVB-1DB
- GW-CPVB-1DC
- GW-CPVB-1DG
- GW-CPVB-1DR
- GW-CPVB-1DT
- GW-CPX-1B
- GW-CPX-1BB
- GW-CPX-1BC
- GW-CPX-1BG
- GW-CPX-1BR
- GW-CPX-1BT
- GW-CPX-1C
- GW-CPX-1CB
- GW-CPX-1CC
- GW-CPX-1CG
- GW-CPX-1CR
- GW-CPX-1CT
- GW-CPX-1D
- GW-CPX-1DB
- GW-CPX-1DC
- GW-CPX-1DG
- GW-CPX-1DR
- GW-CPX-1DT
- GW-CPXB-1B
- GW-CPXB-1BB
- GW-CPXB-1BC
- GW-CPXB-1BG
- GW-CPXB-1BR
- GW-CPXB-1BT
- GW-CPXB-1C
- GW-CPXB-1CB
- GW-CPXB-1CC
- GW-CPXB-1CG
- GW-CPXB-1CR
- GW-CPXB-1CT
- GW-CPXB-1D
- GW-CPXB-1DB
- GW-CPXB-1DC
- GW-CPXB-1DG
- GW-CPXB-1DR
- GW-CPXB-1DT
- GWS-CPH-1B
- GWS-CPH-1BB
- GWS-CPH-1BC
- GWS-CPH-1BG
- GWS-CPH-1BR
- GWS-CPH-1BT
- GWS-CPH-1C
- GWS-CPH-1CB
- GWS-CPH-1CC
- GWS-CPH-1CG
- GWS-CPH-1CR
- GWS-CPH-1CT
- GWS-CPH-1D
- GWS-CPH-1DB
- GWS-CPH-1DC
- GWS-CPH-1DG
- GWS-CPH-1DR
- GWS-CPH-1DT
- GWS-CPHB-1B
- GWS-CPHB-1BB
- GWS-CPHB-1BC
- GWS-CPHB-1BG
- GWS-CPHB-1BR
- GWS-CPHB-1BT
- GWS-CPHB-1C
- GWS-CPHB-1CB
- GWS-CPHB-1CC
- GWS-CPHB-1CG
- GWS-CPHB-1CR
- GWS-CPHB-1CT
- GWS-CPHB-1D
- GWS-CPHB-1DB
- GWS-CPHB-1DC
- GWS-CPHB-1DG
- GWS-CPHB-1DR
- GWS-CPHB-1DT
- GWS-CPV-1B
- GWS-CPV-1BB
- GWS-CPV-1BC
- GWS-CPV-1BG
- GWS-CPV-1BR
- GWS-CPV-1BT
- GWS-CPV-1C
- GWS-CPV-1CB
- GWS-CPV-1CC
- GWS-CPV-1CG
- GWS-CPV-1CR
- GWS-CPV-1CT
- GWS-CPV-1D
- GWS-CPV-1DB
- GWS-CPV-1DC
- GWS-CPV-1DG
- GWS-CPV-1DR
- GWS-CPV-1DT
- GWS-CPVB-1B
- GWS-CPVB-1BB
- GWS-CPVB-1BC
- GWS-CPVB-1BG
- GWS-CPVB-1BR
- GWS-CPVB-1BT
- GWS-CPVB-1C
- GWS-CPVB-1CB
- GWS-CPVB-1CC
- GWS-CPVB-1CG
- GWS-CPVB-1CR
- GWS-CPVB-1CT
- GWS-CPVB-1D
- GWS-CPVB-1DB
- GWS-CPVB-1DC
- GWS-CPVB-1DG
- GWS-CPVB-1DR
- GWS-CPVB-1DT
- GWS-CPX-1B
- GWS-CPX-1BB
- GWS-CPX-1BC
- GWS-CPX-1BG
- GWS-CPX-1BR
- GWS-CPX-1BT
- GWS-CPX-1C
- GWS-CPX-1CB
- GWS-CPX-1CC
- GWS-CPX-1CG
- GWS-CPX-1CR
- GWS-CPX-1CT
- GWS-CPX-1D
- GWS-CPX-1DB
- GWS-CPX-1DC
- GWS-CPX-1DG
- GWS-CPX-1DR
- GWS-CPX-1DT
- GWS-CPXB-1B
- GWS-CPXB-1BB
- GWS-CPXB-1BC
- GWS-CPXB-1BG
- GWS-CPXB-1BR
- GWS-CPXB-1BT
- GWS-CPXB-1C
- GWS-CPXB-1CB
- GWS-CPXB-1CC
- GWS-CPXB-1CG
- GWS-CPXB-1CR
- GWS-CPXB-1CT
- GWS-CPXB-1D
- GWS-CPXB-1DB
- GWS-CPXB-1DC
- GWS-CPXB-1DG
- GWS-CPXB-1DR
- GWS-CPXB-1DT
-
Tip gradient tolerance
- ±0.005
- ±0.01
- ±0.015
-
Filtrare per tipo dati CAD
- 2D
- 3D
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.