Perni con nucleo sagomato / cilindrici / HSS, acciaio per utensili / d, L 0,01 mm / a gradini / sfiato del gas / forma della faccia selezionabile
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
- Disegno
- Anteprima 3D L'anteprima 3D è disponibile dopo la configurazione completa
- Codici componente
- Catalogo
Codice componente:
- Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | RoHS | Material | Shaft diameter tolerance | L dimension tolerance | Tip gradient tolerance | D/P (Shaft diameter) (mm) | Step (Step shape of the first step) | Shape (Tip shape) | No. (Nominal diameter) (mm) | A (Step shape diameter) (mm) | C (Step type taper width) (mm) | CVC (Designation of C dimension in increments of 0.01mm) (mm) | Extend the flat section SV to the bottom | F (Bearing bore length) (mm) | G (Tip C chamfering width) (mm) | K (Tip angle) (°) | L (L dimension) (mm) | N (Gas release section diameter) (mm) | PC (Gas release section diameter) (mm) | Q (Tip R chamfering) (mm) | S (Tip tapered width) (mm) | SV (Gas release facet cutting length) (mm) | V (Tip diameter) (mm) | VC (V dimension alteration (mm) | When PC=P | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | R | 1 | - | - | - | - | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.4 | - | 2 ～ 50 | 0.5 ～ 0.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | R | 1 | - | - | - | SVC | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.4 | - | - | 0.5 ～ 0.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | R | 1 | - | - | - | - | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.4 | - | 2 ～ 50 | - | 0.4 ～ 0.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | R | 1 | - | - | - | SVC | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.4 | - | - | - | 0.4 ～ 0.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | R | 1 | - | - | - | - | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.4 | - | 2 ～ 50 | 0.5 ～ 0.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | R | 1 | - | - | - | SVC | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.4 | - | - | 0.5 ～ 0.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | R | 1 | - | - | - | - | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.4 | - | 2 ～ 50 | - | 0.4 ～ 0.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | R | 1 | - | - | - | SVC | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.4 | - | - | - | 0.4 ～ 0.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 ～ 1.49 | 1A | R | 1.5 | - | - | - | - | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.7 | - | 2 ～ 50 | 0.5 ～ 1.48 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 ～ 1.49 | 1A | R | 1.5 | - | - | - | SVC | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.7 | - | - | 0.5 ～ 1.48 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 ～ 1.49 | 1A | R | 1.5 | - | - | - | - | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.7 | - | 2 ～ 50 | - | 0.4 ～ 0.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 ～ 1.49 | 1A | R | 1.5 | - | - | - | SVC | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.7 | - | - | - | 0.4 ～ 0.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 ～ 1.49 | 1A | R | 1.5 | - | - | - | - | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.7 | - | 2 ～ 50 | 0.5 ～ 1.48 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 ～ 1.49 | 1A | R | 1.5 | - | - | - | SVC | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.7 | - | - | 0.5 ～ 1.48 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 ～ 1.49 | 1A | R | 1.5 | - | - | - | - | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.7 | - | 2 ～ 50 | - | 0.4 ～ 0.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 ～ 1.49 | 1A | R | 1.5 | - | - | - | SVC | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.7 | - | - | - | 0.4 ～ 0.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 ～ 1.99 | 1A | R | 2 | - | - | - | - | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.9 | - | 2 ～ 50 | 0.5 ～ 1.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 ～ 1.99 | 1A | R | 2 | - | - | - | SVC | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.9 | - | - | 0.5 ～ 1.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 ～ 1.99 | 1A | R | 2 | - | - | - | - | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.9 | - | 2 ～ 50 | 0.5 ～ 1.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 ～ 1.99 | 1A | R | 2 | - | - | - | SVC | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.9 | - | - | 0.5 ～ 1.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 ～ 2.49 | 1A | R | 2.5 | - | - | - | - | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 1.2 | - | 2 ～ 50 | 0.5 ～ 2.48 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 ～ 2.49 | 1A | R | 2.5 | - | - | - | SVC | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 1.2 | - | - | 0.5 ～ 2.48 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 ～ 2.99 | 1A | R | 3 | - | - | - | - | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 1.4 | - | 2 ～ 50 | 0.7 ～ 2.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 ～ 2.99 | 1A | R | 3 | - | - | - | SVC | 14.5 ～ 99.3 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 1.4 | - | - | 0.7 ～ 2.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3 ～ 3.49 | 1A | R | 3.5 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.7 | - | 2 ～ 60 | 1 ～ 3.48 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3 ～ 3.49 | 1A | R | 3.5 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.7 | - | - | 1 ～ 3.48 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3 ～ 3.49 | 1A | R | 3.5 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.7 | - | 2 ～ 60 | - | 0.7 ～ 0.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3 ～ 3.49 | 1A | R | 3.5 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.7 | - | - | - | 0.7 ～ 0.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 ～ 3.99 | 1A | R | 4 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.9 | - | 2 ～ 60 | 1 ～ 3.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 ～ 3.99 | 1A | R | 4 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.9 | - | - | 1 ～ 3.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 ～ 3.99 | 1A | R | 4 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.9 | - | 2 ～ 60 | - | 0.7 ～ 0.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 ～ 3.99 | 1A | R | 4 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.9 | - | - | - | 0.7 ～ 0.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 ～ 4.49 | 1A | R | 4.5 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.2 | - | 2 ～ 60 | 1 ～ 4.48 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 ～ 4.49 | 1A | R | 4.5 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.2 | - | - | 1 ～ 4.48 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4.5 ～ 4.99 | 1A | R | 5 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.4 | - | 2 ～ 60 | 1 ～ 4.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4.5 ～ 4.99 | 1A | R | 5 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.4 | - | - | 1 ～ 4.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5 ～ 5.49 | 1A | R | 5.5 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.7 | - | 2 ～ 60 | 1.5 ～ 5.48 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5 ～ 5.49 | 1A | R | 5.5 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.7 | - | - | 1.5 ～ 5.48 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5 ～ 5.49 | 1A | R | 5.5 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.7 | - | 2 ～ 60 | - | 1 ～ 1.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5 ～ 5.49 | 1A | R | 5.5 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.7 | - | - | - | 1 ～ 1.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 ～ 5.99 | 1A | R | 6 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | 2 ～ 60 | 2 ～ 5.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 ～ 5.99 | 1A | R | 6 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | - | 2 ～ 5.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 ～ 5.99 | 1A | R | 6 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | 2 ～ 60 | - | 1.5 ～ 1.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 ～ 5.99 | 1A | R | 6 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | - | - | 1.5 ～ 1.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 ～ 6.99 | 1A | R | 7 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | 2 ～ 60 | 2 ～ 6.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 ～ 6.99 | 1A | R | 7 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | - | 2 ～ 6.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 ～ 6.99 | 1A | R | 7 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | 2 ～ 60 | - | 1.5 ～ 1.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 ～ 6.99 | 1A | R | 7 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | - | - | 1.5 ～ 1.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 ～ 7.99 | 1A | R | 8 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | 2 ～ 60 | 2 ～ 7.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 ～ 7.99 | 1A | R | 8 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | - | 2 ～ 7.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 ～ 7.99 | 1A | R | 8 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | 2 ～ 60 | - | 1.5 ～ 1.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 ～ 7.99 | 1A | R | 8 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | - | - | 1.5 ～ 1.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 ～ 9.99 | 1A | R | 10 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | 2 ～ 60 | 2 ～ 9.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 ～ 9.99 | 1A | R | 10 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | - | 2 ～ 9.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 ～ 9.99 | 1A | R | 10 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | 2 ～ 60 | - | 1.5 ～ 1.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 ～ 9.99 | 1A | R | 10 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | - | - | 1.5 ～ 1.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 10 ～ 12.99 | 1A | R | 13 | - | - | - | - | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | 2 ～ 60 | 2 ～ 12.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 10 ～ 12.99 | 1A | R | 13 | - | - | - | SVC | 14.5 ～ 119.3 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2.9 | - | - | 2 ～ 12.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1B | R | 1 | 0.4 ～ 0.98 | - | - | - | 14.5 ～ 99.1 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.4 | - | 2 ～ 50 | 0.5 ～ 0.98 | - | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1B | R | 1 | 0.4 ～ 0.98 | - | - | SVC | 14.5 ～ 99.1 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 0.4 | - | - | 0.5 ～ 0.98 | - | - |
Loading...
Informazioni di base
| Shape type | One-step gas release | Surface treatment | No | Head thickness | 4mm(T4) |
|---|---|---|---|---|---|
| Step (Step shape of the second step) | No second step |
Configura
Proprietà di base
-
Material
- SKH51
- SKD61
- NAK80
- DH2F
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
L dimension tolerance
- +0.02/0
- 0/-0.1
-
Tip gradient tolerance
- ±0.01
- ±0.015
-
D/P (Shaft diameter)(mm)
-
Step (Step shape of the first step)
- 1A
- 1B
- 1C
- 1D
-
No. (Nominal diameter)(mm)
-
A (Step shape diameter)(mm)
-
C (Step type taper width)(mm)
-
CVC (Designation of C dimension in increments of 0.01mm)(mm)
-
Extend the flat section SV to the bottom
- SVC
-
F (Bearing bore length)(mm)
-
G (Tip C chamfering width)(mm)
-
K (Tip angle)(°)
-
L (L dimension)(mm)
-
N (Gas release section diameter)(mm)
-
PC (Gas release section diameter)(mm)
[5.92-6.998/0.001mmpezzi][7.92-12.998/0.001mmpezzi][0.72-5.985/0.005mmpezzi][6.92-7.99/0.005mmpezzi]
-
Q (Tip R chamfering)(mm)
-
S (Tip tapered width)(mm)
-
SV (Gas release facet cutting length)(mm)
-
V (Tip diameter)(mm)
-
VC (V dimension alteration(mm)
-
When PC=P
- PCX
-
Tipo
- GV-CPDB-1A
- GV-CPDB-1AB
- GV-CPDB-1AC
- GV-CPDB-1AG
- GV-CPDB-1AR
- GV-CPDB-1AT
- GV-CPDB-1B
- GV-CPDB-1BB
- GV-CPDB-1BC
- GV-CPDB-1BG
- GV-CPDB-1BR
- GV-CPDB-1BT
- GV-CPDB-1C
- GV-CPDB-1CB
- GV-CPDB-1CC
- GV-CPDB-1CG
- GV-CPDB-1CR
- GV-CPDB-1CT
- GV-CPDB-1D
- GV-CPDB-1DB
- GV-CPDB-1DC
- GV-CPDB-1DG
- GV-CPDB-1DR
- GV-CPDB-1DT
- GV-CPFB-1A
- GV-CPFB-1AB
- GV-CPFB-1AC
- GV-CPFB-1AG
- GV-CPFB-1AR
- GV-CPFB-1AT
- GV-CPFB-1B
- GV-CPFB-1BB
- GV-CPFB-1BC
- GV-CPFB-1BG
- GV-CPFB-1BR
- GV-CPFB-1BT
- GV-CPFB-1C
- GV-CPFB-1CB
- GV-CPFB-1CC
- GV-CPFB-1CG
- GV-CPFB-1CR
- GV-CPFB-1CT
- GV-CPFB-1D
- GV-CPFB-1DB
- GV-CPFB-1DC
- GV-CPFB-1DG
- GV-CPFB-1DR
- GV-CPFB-1DT
- GV-CPGB-1A
- GV-CPGB-1AB
- GV-CPGB-1AC
- GV-CPGB-1AG
- GV-CPGB-1AR
- GV-CPGB-1AT
- GV-CPGB-1B
- GV-CPGB-1BB
- GV-CPGB-1BC
- GV-CPGB-1BG
- GV-CPGB-1BR
- GV-CPGB-1BT
- GV-CPGB-1C
- GV-CPGB-1CB
- GV-CPGB-1CC
- GV-CPGB-1CG
- GV-CPGB-1CR
- GV-CPGB-1CT
- GV-CPGB-1D
- GV-CPGB-1DB
- GV-CPGB-1DC
- GV-CPGB-1DG
- GV-CPGB-1DR
- GV-CPGB-1DT
- GV-CPHB-1A
- GV-CPHB-1AB
- GV-CPHB-1AC
- GV-CPHB-1AG
- GV-CPHB-1AR
- GV-CPHB-1AT
- GV-CPHB-1B
- GV-CPHB-1BB
- GV-CPHB-1BC
- GV-CPHB-1BG
- GV-CPHB-1BR
- GV-CPHB-1BT
- GV-CPHB-1C
- GV-CPHB-1CB
- GV-CPHB-1CC
- GV-CPHB-1CG
- GV-CPHB-1CR
- GV-CPHB-1CT
- GV-CPHB-1D
- GV-CPHB-1DB
- GV-CPHB-1DC
- GV-CPHB-1DG
- GV-CPHB-1DR
- GV-CPHB-1DT
- GV-CPKB-1A
- GV-CPKB-1AB
- GV-CPKB-1AC
- GV-CPKB-1AG
- GV-CPKB-1AR
- GV-CPKB-1AT
- GV-CPKB-1B
- GV-CPKB-1BB
- GV-CPKB-1BC
- GV-CPKB-1BG
- GV-CPKB-1BR
- GV-CPKB-1BT
- GV-CPKB-1C
- GV-CPKB-1CB
- GV-CPKB-1CC
- GV-CPKB-1CG
- GV-CPKB-1CR
- GV-CPKB-1CT
- GV-CPKB-1D
- GV-CPKB-1DB
- GV-CPKB-1DC
- GV-CPKB-1DG
- GV-CPKB-1DR
- GV-CPKB-1DT
- GV-CPNB-1A
- GV-CPNB-1AB
- GV-CPNB-1AC
- GV-CPNB-1AG
- GV-CPNB-1AR
- GV-CPNB-1AT
- GV-CPNB-1B
- GV-CPNB-1BB
- GV-CPNB-1BC
- GV-CPNB-1BG
- GV-CPNB-1BR
- GV-CPNB-1BT
- GV-CPNB-1C
- GV-CPNB-1CB
- GV-CPNB-1CC
- GV-CPNB-1CG
- GV-CPNB-1CR
- GV-CPNB-1CT
- GV-CPNB-1D
- GV-CPNB-1DB
- GV-CPNB-1DC
- GV-CPNB-1DG
- GV-CPNB-1DR
- GV-CPNB-1DT
- GV-CPPB-1A
- GV-CPPB-1AB
- GV-CPPB-1AC
- GV-CPPB-1AG
- GV-CPPB-1AR
- GV-CPPB-1AT
- GV-CPPB-1B
- GV-CPPB-1BB
- GV-CPPB-1BC
- GV-CPPB-1BG
- GV-CPPB-1BR
- GV-CPPB-1BT
- GV-CPPB-1C
- GV-CPPB-1CB
- GV-CPPB-1CC
- GV-CPPB-1CG
- GV-CPPB-1CR
- GV-CPPB-1CT
- GV-CPPB-1D
- GV-CPPB-1DB
- GV-CPPB-1DC
- GV-CPPB-1DG
- GV-CPPB-1DR
- GV-CPPB-1DT
- GV-CPXB-1A
- GV-CPXB-1AB
- GV-CPXB-1AC
- GV-CPXB-1AG
- GV-CPXB-1AR
- GV-CPXB-1AT
- GV-CPXB-1B
- GV-CPXB-1BB
- GV-CPXB-1BC
- GV-CPXB-1BG
- GV-CPXB-1BR
- GV-CPXB-1BT
- GV-CPXB-1C
- GV-CPXB-1CB
- GV-CPXB-1CC
- GV-CPXB-1CG
- GV-CPXB-1CR
- GV-CPXB-1CT
- GV-CPXB-1D
- GV-CPXB-1DB
- GV-CPXB-1DC
- GV-CPXB-1DG
- GV-CPXB-1DR
- GV-CPXB-1DT
-
Shape (Tip shape)
- No processing
- C
- G
- T
- R
- B
-
Filtrare per tipo dati CAD
- 2D
- 3D
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.