Perni con nucleo sagomato / cilindrici / HSS, acciaio per utensili / sfiato a gas / l 0,01 mm / a gradini / sfiato a gas / forma della faccia selezionabile (Codici componente - Download CAD)
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
- Disegno
- Anteprima 3D L'anteprima 3D è disponibile dopo la configurazione completa
- Codici componente
- Catalogo
Codice componente:
- Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | RoHS | Material | L dimension tolerance | Tip gradient tolerance | A/AAC (Tip diameter) (mm) | D/P (Shaft diameter) (mm) | Type of the first step Step1 | Tip shape Shape | RE (R shape alteration・enlargement) (mm) | C (Step type taper width) (mm) | CVC (C dimension can be designated at 0.01mm increments) (mm) | DC (Gas release section diameter) (mm) | Extend the flat section SV to the bottom | F (Bearing bore length) (mm) | FC (Makes F dimension shorter than F min) (mm) | G (Tip C chamfering width) (mm) | K (Tip angle) (°) | L (L dimension) (mm) | N (Gas release section diameter) (mm) | Q (Tip R chamfering) (mm) | R (Step type R) (mm) | S (Tip tapered width) (mm) | SV (Gas release facet cutting length) (mm) | When DC = D, DCX is applied | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.5 ～ 2.49 | 2.5 | E | S | - | - | - | 2.42 ～ 2.495 | - | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 1 | - | 2 ～ 50 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.5 ～ 2.49 | 2.5 | E | S | - | - | - | 2.42 ～ 2.495 | SVC | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 1 | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.5 ～ 2.49 | 2.5 | E | S | - | - | - | - | - | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 1 | - | 2 ～ 50 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.5 ～ 2.49 | 2.5 | E | S | - | - | - | - | SVC | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 1 | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.5 ～ 2.49 | 2.5 | E | S | 0.5 ～ 2 | - | - | 2.42 ～ 2.495 | - | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 2 ～ 50 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.5 ～ 2.49 | 2.5 | E | S | 0.5 ～ 2 | - | - | 2.42 ～ 2.495 | SVC | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.5 ～ 2.49 | 2.5 | E | S | 0.5 ～ 2 | - | - | - | - | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 2 ～ 50 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.5 ～ 2.49 | 2.5 | E | S | 0.5 ～ 2 | - | - | - | SVC | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 2.99 | 3 | E | S | - | - | - | 2.92 ～ 2.995 | - | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 1.1 | - | 2 ～ 50 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 2.99 | 3 | E | S | - | - | - | 2.92 ～ 2.995 | SVC | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 1.1 | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 2.99 | 3 | E | S | - | - | - | - | - | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 1.1 | - | 2 ～ 50 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 2.99 | 3 | E | S | - | - | - | - | SVC | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | 0.2 ～ 1.1 | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 2.99 | 3 | E | S | 0.5 ～ 2 | - | - | 2.92 ～ 2.995 | - | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 2 ～ 50 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 2.99 | 3 | E | S | 0.5 ～ 2 | - | - | 2.92 ～ 2.995 | SVC | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 2.99 | 3 | E | S | 0.5 ～ 2 | - | - | - | - | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 2 ～ 50 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 2.99 | 3 | E | S | 0.5 ～ 2 | - | - | - | SVC | 14.5 ～ 99.5 | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.49 | 3.5 | E | S | - | - | - | 3.42 ～ 3.495 | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.4 | - | 2 ～ 60 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.49 | 3.5 | E | S | - | - | - | 3.42 ～ 3.495 | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.4 | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.49 | 3.5 | E | S | - | - | - | - | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.4 | - | 2 ～ 60 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.49 | 3.5 | E | S | - | - | - | - | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.4 | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.49 | 3.5 | E | S | 0.5 ～ 2 | - | - | 3.42 ～ 3.495 | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 2 ～ 60 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.49 | 3.5 | E | S | 0.5 ～ 2 | - | - | 3.42 ～ 3.495 | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.49 | 3.5 | E | S | 0.5 ～ 2 | - | - | - | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 2 ～ 60 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.49 | 3.5 | E | S | 0.5 ～ 2 | - | - | - | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 3.5 | E | S | - | - | - | 3.42 ～ 3.495 | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.4 | - | 2 ～ 60 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 3.5 | E | S | - | - | - | 3.42 ～ 3.495 | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.4 | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 3.5 | E | S | - | - | - | - | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.4 | - | 2 ～ 60 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 3.5 | E | S | - | - | - | - | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.4 | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 3.5 | E | S | 0.5 ～ 2 | - | - | 3.42 ～ 3.495 | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 2 ～ 60 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 3.5 | E | S | 0.5 ～ 2 | - | - | 3.42 ～ 3.495 | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 3.5 | E | S | 0.5 ～ 2 | - | - | - | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 2 ～ 60 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 3.5 | E | S | 0.5 ～ 2 | - | - | - | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.99 | 4 | E | S | - | - | - | 3.92 ～ 3.995 | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.6 | - | 2 ～ 60 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.99 | 4 | E | S | - | - | - | 3.92 ～ 3.995 | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.6 | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.99 | 4 | E | S | - | - | - | - | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.6 | - | 2 ～ 60 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.99 | 4 | E | S | - | - | - | - | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.6 | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.99 | 4 | E | S | 0.5 ～ 2 | - | - | 3.92 ～ 3.995 | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 2 ～ 60 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.99 | 4 | E | S | 0.5 ～ 2 | - | - | 3.92 ～ 3.995 | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.99 | 4 | E | S | 0.5 ～ 2 | - | - | - | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 2 ～ 60 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 3.99 | 4 | E | S | 0.5 ～ 2 | - | - | - | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 4 | E | S | - | - | - | 3.92 ～ 3.995 | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.6 | - | 2 ～ 60 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 4 | E | S | - | - | - | 3.92 ～ 3.995 | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.6 | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 4 | E | S | - | - | - | - | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.6 | - | 2 ～ 60 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 4 | E | S | - | - | - | - | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.6 | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 4 | E | S | 0.5 ～ 2 | - | - | 3.92 ～ 3.995 | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 2 ～ 60 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 4 | E | S | 0.5 ～ 2 | - | - | 3.92 ～ 3.995 | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 4 | E | S | 0.5 ～ 2 | - | - | - | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 2 ～ 60 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 0.7 ～ 0.99 | 4 | E | S | 0.5 ～ 2 | - | - | - | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 4.49 | 4.5 | E | S | - | - | - | 4.42 ～ 4.495 | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.7 | - | 2 ～ 60 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 4.49 | 4.5 | E | S | - | - | - | 4.42 ～ 4.495 | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.7 | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 4.49 | 4.5 | E | S | - | - | - | - | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.7 | - | 2 ～ 60 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 4.49 | 4.5 | E | S | - | - | - | - | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 1.7 | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 4.49 | 4.5 | E | S | 0.5 ～ 2 | - | - | 4.42 ～ 4.495 | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 2 ～ 60 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 4.49 | 4.5 | E | S | 0.5 ～ 2 | - | - | 4.42 ～ 4.495 | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 4.49 | 4.5 | E | S | 0.5 ～ 2 | - | - | - | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 2 ～ 60 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 4.49 | 4.5 | E | S | 0.5 ～ 2 | - | - | - | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 4.99 | 5 | E | S | - | - | - | 4.92 ～ 4.995 | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2 | - | 2 ～ 60 | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 4.99 | 5 | E | S | - | - | - | 4.92 ～ 4.995 | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2 | - | - | - | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 4.99 | 5 | E | S | - | - | - | - | - | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2 | - | 2 ～ 60 | DCX | ||
- | 1 | Preventivo | 10 | SKH51 | +0.02/0 | 0/-0.01 | 1 ～ 4.99 | 5 | E | S | - | - | - | - | SVC | 14.5 ～ 119.5 | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | - | 0.2 ～ 2 | - | - | DCX |
Loading...
Informazioni di base
| Shape type | One-step gas release | Shaft diameter tolerance | 0/-0.005 | Tip lapped or not | No |
|---|---|---|---|---|---|
| Type of the second step Step2 | No second step |
Configura
Proprietà di base
-
Material
- SKH51
- SKD61
-
L dimension tolerance
- +0.01/0
- +0.02/0
- 0/-0.05
-
Tip gradient tolerance
- 0/-0.005
- 0/-0.01
-
A/AAC (Tip diameter)(mm)
-
D/P (Shaft diameter)(mm)
-
Tip shape Shape
- S
- C
- G
- T
- R
- B
-
RE (R shape alteration・enlargement)(mm)
-
C (Step type taper width)(mm)
-
CVC (C dimension can be designated at 0.01mm increments)(mm)
-
DC (Gas release section diameter)(mm)
[0.92-0.995/0.005mmpezzi][1.42-1.495/0.005mmpezzi][1.92-1.995/0.005mmpezzi][2.42-2.495/0.005mmpezzi][2.92-2.995/0.005mmpezzi][3.42-3.495/0.005mmpezzi][3.92-3.995/0.005mmpezzi][4.42-4.495/0.005mmpezzi][4.92-4.995/0.005mmpezzi][5.42-5.495/0.005mmpezzi][5.92-5.995/0.005mmpezzi][6.92-6.995/0.005mmpezzi][7.92-7.995/0.005mmpezzi][9.92-9.995/0.005mmpezzi][12.92-12.995/0.005mmpezzi]
-
Extend the flat section SV to the bottom
- SVC
-
F (Bearing bore length)(mm)
-
FC (Makes F dimension shorter than F min)(mm)
-
G (Tip C chamfering width)(mm)
-
K (Tip angle)(°)
-
L (L dimension)(mm)
-
N (Gas release section diameter)(mm)
-
Q (Tip R chamfering)(mm)
-
R (Step type R)(mm)
-
S (Tip tapered width)(mm)
-
SV (Gas release facet cutting length)(mm)
-
When DC = D, DCX is applied
- DCX
-
Tipo
- GV-CPHS-BB
- GV-CPHS-BC
- GV-CPHS-BG
- GV-CPHS-BR
- GV-CPHS-BS
- GV-CPHS-BT
- GV-CPHS-CB
- GV-CPHS-CC
- GV-CPHS-CG
- GV-CPHS-CR
- GV-CPHS-CS
- GV-CPHS-CT
- GV-CPHS-DB
- GV-CPHS-DC
- GV-CPHS-DG
- GV-CPHS-DR
- GV-CPHS-DS
- GV-CPHS-DT
- GV-CPHS-EB
- GV-CPHS-EC
- GV-CPHS-EG
- GV-CPHS-ER
- GV-CPHS-ES
- GV-CPHS-ET
- GV-CPPS-BB
- GV-CPPS-BC
- GV-CPPS-BG
- GV-CPPS-BR
- GV-CPPS-BS
- GV-CPPS-BT
- GV-CPPS-CB
- GV-CPPS-CC
- GV-CPPS-CG
- GV-CPPS-CR
- GV-CPPS-CS
- GV-CPPS-CT
- GV-CPPS-DB
- GV-CPPS-DC
- GV-CPPS-DG
- GV-CPPS-DR
- GV-CPPS-DS
- GV-CPPS-DT
- GV-CPPS-EB
- GV-CPPS-EC
- GV-CPPS-EG
- GV-CPPS-ER
- GV-CPPS-ES
- GV-CPPS-ET
- GV-CPVS-BB
- GV-CPVS-BC
- GV-CPVS-BG
- GV-CPVS-BR
- GV-CPVS-BS
- GV-CPVS-BT
- GV-CPVS-CB
- GV-CPVS-CC
- GV-CPVS-CG
- GV-CPVS-CR
- GV-CPVS-CS
- GV-CPVS-CT
- GV-CPVS-DB
- GV-CPVS-DC
- GV-CPVS-DG
- GV-CPVS-DR
- GV-CPVS-DS
- GV-CPVS-DT
- GV-CPVS-EB
- GV-CPVS-EC
- GV-CPVS-EG
- GV-CPVS-ER
- GV-CPVS-ES
- GV-CPVS-ET
- GV-CPZS-BB
- GV-CPZS-BC
- GV-CPZS-BG
- GV-CPZS-BR
- GV-CPZS-BS
- GV-CPZS-BT
- GV-CPZS-CB
- GV-CPZS-CC
- GV-CPZS-CG
- GV-CPZS-CR
- GV-CPZS-CS
- GV-CPZS-CT
- GV-CPZS-DB
- GV-CPZS-DC
- GV-CPZS-DG
- GV-CPZS-DR
- GV-CPZS-DS
- GV-CPZS-DT
- GV-CPZS-EB
- GV-CPZS-EC
- GV-CPZS-EG
- GV-CPZS-ER
- GV-CPZS-ES
- GV-CPZS-ET
-
Type of the first step Step1
- B
- C
- D
- E
-
Filtrare per tipo dati CAD
- 2D
- 3D
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.