• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Perni con nucleo sagomato / cilindrici / HSS, acciaio per utensili / blocco antirotazione / a gradini / forma del profilo frontale selezionabile

Perni con nucleo sagomato / cilindrici / HSS, acciaio per utensili / blocco antirotazione / a gradini / forma del profilo frontale selezionabile

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. Avanti >>
Codice componente
CPD-BH2-[17-100/0.01]-F[15-98/0.01]-P[0.6-1.9/0.01]-E[0-0.7/0.01]
CPD-BH2.5-[17-100/0.01]-F[15-98/0.01]-P[0.8-2.4/0.01]-E[0-0.9/0.01]
CPD-BH3-[17-100/0.01]-F[15-98/0.01]-P[1-2.9/0.01]-E[0-2.9/0.01]
CPD-BH3.5-[17-100/0.01]-F[15-98/0.01]-P[1-3.4/0.01]-E[0-3.4/0.01]
CPD-BH4-[17-100/0.01]-F[15-98/0.01]-P[1-3.9/0.01]-E[0-3.9/0.01]
CPD-BH4.5-[17-100/0.01]-F[15-98/0.01]-P[1-4.4/0.01]-E[0-4.4/0.01]
CPD-BH5-[17-100/0.01]-F[15-98/0.01]-P[1.2-4.9/0.01]-E[0-4.9/0.01]
CPD-BH5.5-[17-100/0.01]-F[15-98/0.01]-P[1.2-5.4/0.01]-W[1.2-5.4/0.01]-E[0-5.4/0.01]
CPD-BH6-[17-100/0.01]-F[15-98/0.01]-P[1.2-5.9/0.01]-E[0-5.9/0.01]
CPD-BH6.5-[17-100/0.01]-F[15-98/0.01]-P[1.5-6.4/0.01]-E[0-6.4/0.01]
CPD-BH7-[17-100/0.01]-F[15-98/0.01]-P[1.5-6.9/0.01]-E[0-6.9/0.01]
CPD-BH8-[17-100/0.01]-F[15-98/0.01]-P[1.6-7.9/0.01]-E[0-7.9/0.01]
CPD-BH10-[17-100/0.01]-F[15-98/0.01]-P[1.6-9.9/0.01]-E[0-9.9/0.01]
CPD-DH2-[17-100/0.01]-F[15-98/0.01]-P[0.6-1.9/0.01]-E[0-0.7/0.01]-C[0.3-0.5/0.01]
CPD-DH2.5-[17-100/0.01]-F[15-98/0.01]-P[0.8-2.4/0.01]-E[0-0.9/0.01]-C[0.3-0.5/0.01]
CPD-DH3-[17-100/0.01]-F[15-98/0.01]-P[1-2.9/0.01]-E[0-2.9/0.01]-C[0.3-0.5/0.01]
CPD-DH3.5-[17-100/0.01]-F[15-98/0.01]-P[1-3.4/0.01]-E[0-3.4/0.01]-C[0.3-0.5/0.01]
CPD-DH4-[17-100/0.01]-F[15-98/0.01]-P[1-3.9/0.01]-E[0-3.9/0.01]-C[0.3-0.5/0.01]
CPD-DH4.5-[17-100/0.01]-F[15-98/0.01]-P[1-4.4/0.01]-E[0-4.4/0.01]-C[0.3-0.5/0.01]
CPD-DH5-[17-100/0.01]-F[15-98/0.01]-P[1.2-4.9/0.01]-E[0-4.9/0.01]-C[0.3-0.5/0.01]
CPD-DH5.5-[17-100/0.01]-F[15-98/0.01]-P[1.2-5.4/0.01]-E[0-5.4/0.01]-C[0.3-1/0.01]
CPD-DH6-[17-100/0.01]-F[15-98/0.01]-P[1.2-5.9/0.01]-E[0-5.9/0.01]-C[0.3-1/0.01]
CPD-DH6.5-[17-100/0.01]-F[15-98/0.01]-P[1.5-6.4/0.01]-E[0-6.4/0.01]-C[0.3-1/0.01]
CPD-DH7-[17-100/0.01]-F[15-98/0.01]-P[1.5-6.9/0.01]-E[0-6.9/0.01]-C[0.3-1/0.01]
CPD-DH8-[17-100/0.01]-F[15-98/0.01]-P[1.6-7.9/0.01]-E[0-7.9/0.01]-C[0.3-1/0.01]
CPD-DH10-[17-100/0.01]-F[15-98/0.01]-P[1.6-9.9/0.01]-E[0-9.9/0.01]-C[0.3-1/0.01]
CPH-BH2-[17-100/0.01]-F[15-98/0.01]-P[0.6-1.9/0.01]-E[0-0.7/0.01]
CPH-BH2.5-[17-100/0.01]-F[15-98/0.01]-P[0.8-2.4/0.01]-E[0-0.9/0.01]
CPH-BH3-[17-100/0.01]-F[15-98/0.01]-P[1-2.9/0.01]-E[0-2.9/0.01]
CPH-BH3.5-[17-100/0.01]-F[15-98/0.01]-P[1-3.4/0.01]-E[0-3.4/0.01]
CPH-BH4-[17-100/0.01]-F[15-98/0.01]-P[1-3.9/0.01]-E[0-3.9/0.01]
CPH-BH4.5-[17-100/0.01]-F[15-98/0.01]-P[1-4.4/0.01]-E[0-4.4/0.01]
CPH-BH5-[17-100/0.01]-F[15-98/0.01]-P[1.2-4.9/0.01]-E[0-4.9/0.01]
CPH-BH5.5-[17-100/0.01]-F[15-98/0.01]-P[1.2-5.4/0.01]-E[0-5.4/0.01]
CPH-BH6-[17-100/0.01]-F[15-98/0.01]-P[1.2-5.9/0.01]-E[0-5.9/0.01]
CPH-BH6.5-[17-100/0.01]-F[15-98/0.01]-P[1.5-6.4/0.01]-E[0-6.4/0.01]
CPH-BH7-[17-100/0.01]-F[15-98/0.01]-P[1.5-6.9/0.01]-E[0-6.9/0.01]
CPH-BH8-[17-100/0.01]-F[15-98/0.01]-P[1.6-7.9/0.01]-E[0-7.9/0.01]
CPH-BH10-[17-100/0.01]-F[15-98/0.01]-P[1.6-9.9/0.01]-E[0-9.9/0.01]
CPH-DH2-[17-100/0.01]-F[15-98/0.01]-P[0.6-1.9/0.01]-E[0-0.7/0.01]-C[0.3-0.5/0.01]
CPH-DH2.5-[17-100/0.01]-F[15-98/0.01]-P[0.8-2.4/0.01]-E[0-0.9/0.01]-C[0.3-0.5/0.01]
CPH-DH3-[17-100/0.01]-F[15-98/0.01]-P[1-2.9/0.01]-E[0-2.9/0.01]-C[0.3-1/0.01]
CPH-DH3.5-[17-100/0.01]-F[15-98/0.01]-P[1-3.4/0.01]-E[0-3.4/0.01]-C[0.3-1/0.01]
CPH-DH4-[17-100/0.01]-F[15-98/0.01]-P[1-3.9/0.01]-E[0-3.9/0.01]-C[0.3-1/0.01]
CPH-DH4.5-[17-100/0.01]-F[15-98/0.01]-P[1-4.4/0.01]-E[0-4.4/0.01]-C[0.3-1/0.01]
CPH-DH5-[17-100/0.01]-F[15-98/0.01]-P[1.2-4.9/0.01]-E[0-4.9/0.01]-C[0.3-1/0.01]
CPH-DH5.5-[17-100/0.01]-F[15-98/0.01]-P[1.2-5.4/0.01]-E[0-5.4/0.01]-C[0.3-1/0.01]
CPH-DH6-[17-100/0.01]-F[15-98/0.01]-P[1.2-5.9/0.01]-E[0-5.9/0.01]-C[0.3-1/0.01]
CPH-DH6.5-[17-100/0.01]-F[15-98/0.01]-P[1.5-6.4/0.01]-E[0-6.4/0.01]-C[0.3-1/0.01]
CPH-DH7-[17-100/0.01]-F[15-98/0.01]-P[1.5-6.9/0.01]-E[0-6.4/0.01]-C[0.3-1/0.01]
CPH-DH8-[17-100/0.01]-F[15-98/0.01]-P[1.6-7.9/0.01]-E[0-7.9/0.01]-C[0.3-1/0.01]
CPH-DH10-[17-100/0.01]-F[15-98/0.01]-P[1.6-9.9/0.01]-E[0-9.9/0.01]-C[0.3-1/0.01]
CPP-BH2-[17-100/0.01]-F[15-98/0.01]-P[0.6-1.9/0.01]-E[0-0.7/0.01]
CPP-BH2.5-[17-100/0.01]-F[15-98/0.01]-P[0.8-2.4/0.01]-E[0-0.9/0.01]
CPP-BH3-[17-100/0.01]-F[15-98/0.01]-P[1-2.9/0.01]-E[0-1.1/0.01]
CPP-BH3.5-[17-100/0.01]-F[15-98/0.01]-P[1-3.4/0.01]-E[0-1.35/0.01]
CPP-BH4-[17-100/0.01]-F[15-98/0.01]-P[1-3.9/0.01]-E[0-1.6/0.01]
CPP-BH4.5-[17-100/0.01]-F[15-98/0.01]-P[1-4.4/0.01]-E[0-1.85/0.01]
CPP-BH5-[17-100/0.01]-F[15-98/0.01]-P[1.2-4.9/0.01]-E[0-1.9/0.01]
CPP-BH5.5-[17-100/0.01]-F[15-98/0.01]-P[1.2-5.4/0.01]-E[0-2.15/0.01]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSMaterial Shaft diameter tolerance L/F dimension tolerance P dimension tolerance P-2E tolerance W dimension tolerance W-2E tolerance Step (Step shape) Shape (Tip shape) D/P (Shaft diameter)
(mm) 		C (Tip part)
(mm) 		E (Tip part)
(mm) 		F (Bearing bore length)
(mm) 		L (L dimension)
(mm) 		P (Tip part)
(mm) 		W (Tip part)
(mm)

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02B (for round shank)H2-0 ～ 0.715 ～ 9817 ～ 1000.6 ～ 1.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02B (for round shank)H2.5-0 ～ 0.915 ～ 9817 ～ 1000.8 ～ 2.4-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02B (for round shank)H3-0 ～ 2.915 ～ 9817 ～ 1001 ～ 2.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02B (for round shank)H3.5-0 ～ 3.415 ～ 9817 ～ 1001 ～ 3.4-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02B (for round shank)H4-0 ～ 3.915 ～ 9817 ～ 1001 ～ 3.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02B (for round shank)H4.5-0 ～ 4.415 ～ 9817 ～ 1001 ～ 4.4-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02B (for round shank)H5-0 ～ 4.915 ～ 9817 ～ 1001.2 ～ 4.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02B (for round shank)H5.5-0 ～ 5.415 ～ 9817 ～ 1001.2 ～ 5.41.2 ～ 5.4

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02B (for round shank)H6-0 ～ 5.915 ～ 9817 ～ 1001.2 ～ 5.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02B (for round shank)H6.5-0 ～ 6.415 ～ 9817 ～ 1001.5 ～ 6.4-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02B (for round shank)H7-0 ～ 6.915 ～ 9817 ～ 1001.5 ～ 6.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02B (for round shank)H8-0 ～ 7.915 ～ 9817 ～ 1001.6 ～ 7.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02B (for round shank)H10-0 ～ 9.915 ～ 9817 ～ 1001.6 ～ 9.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02D (for round shank)H20.3 ～ 0.50 ～ 0.715 ～ 9817 ～ 1000.6 ～ 1.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02D (for round shank)H2.50.3 ～ 0.50 ～ 0.915 ～ 9817 ～ 1000.8 ～ 2.4-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02D (for round shank)H30.3 ～ 0.50 ～ 2.915 ～ 9817 ～ 1001 ～ 2.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02D (for round shank)H3.50.3 ～ 0.50 ～ 3.415 ～ 9817 ～ 1001 ～ 3.4-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02D (for round shank)H40.3 ～ 0.50 ～ 3.915 ～ 9817 ～ 1001 ～ 3.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02D (for round shank)H4.50.3 ～ 0.50 ～ 4.415 ～ 9817 ～ 1001 ～ 4.4-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02D (for round shank)H50.3 ～ 0.50 ～ 4.915 ～ 9817 ～ 1001.2 ～ 4.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02D (for round shank)H5.50.3 ～ 10 ～ 5.415 ～ 9817 ～ 1001.2 ～ 5.4-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02D (for round shank)H60.3 ～ 10 ～ 5.915 ～ 9817 ～ 1001.2 ～ 5.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02D (for round shank)H6.50.3 ～ 10 ～ 6.415 ～ 9817 ～ 1001.5 ～ 6.4-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02D (for round shank)H70.3 ～ 10 ～ 6.915 ～ 9817 ～ 1001.5 ～ 6.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02D (for round shank)H80.3 ～ 10 ～ 7.915 ～ 9817 ～ 1001.6 ～ 7.9-

-

1 Preventivo 10SKD61-0.01/-0.02+0.05/0±0.02±0.02±0.02±0.02D (for round shank)H100.3 ～ 10 ～ 9.915 ～ 9817 ～ 1001.6 ～ 9.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H2-0 ～ 0.715 ～ 9817 ～ 1000.6 ～ 1.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H2.5-0 ～ 0.915 ～ 9817 ～ 1000.8 ～ 2.4-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H3-0 ～ 2.915 ～ 9817 ～ 1001 ～ 2.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H3.5-0 ～ 3.415 ～ 9817 ～ 1001 ～ 3.4-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H4-0 ～ 3.915 ～ 9817 ～ 1001 ～ 3.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H4.5-0 ～ 4.415 ～ 9817 ～ 1001 ～ 4.4-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H5-0 ～ 4.915 ～ 9817 ～ 1001.2 ～ 4.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H5.5-0 ～ 5.415 ～ 9817 ～ 1001.2 ～ 5.4-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H6-0 ～ 5.915 ～ 9817 ～ 1001.2 ～ 5.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H6.5-0 ～ 6.415 ～ 9817 ～ 1001.5 ～ 6.4-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H7-0 ～ 6.915 ～ 9817 ～ 1001.5 ～ 6.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H8-0 ～ 7.915 ～ 9817 ～ 1001.6 ～ 7.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H10-0 ～ 9.915 ～ 9817 ～ 1001.6 ～ 9.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01D (for round shank)H20.3 ～ 0.50 ～ 0.715 ～ 9817 ～ 1000.6 ～ 1.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01D (for round shank)H2.50.3 ～ 0.50 ～ 0.915 ～ 9817 ～ 1000.8 ～ 2.4-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01D (for round shank)H30.3 ～ 10 ～ 2.915 ～ 9817 ～ 1001 ～ 2.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01D (for round shank)H3.50.3 ～ 10 ～ 3.415 ～ 9817 ～ 1001 ～ 3.4-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01D (for round shank)H40.3 ～ 10 ～ 3.915 ～ 9817 ～ 1001 ～ 3.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01D (for round shank)H4.50.3 ～ 10 ～ 4.415 ～ 9817 ～ 1001 ～ 4.4-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01D (for round shank)H50.3 ～ 10 ～ 4.915 ～ 9817 ～ 1001.2 ～ 4.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01D (for round shank)H5.50.3 ～ 10 ～ 5.415 ～ 9817 ～ 1001.2 ～ 5.4-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01D (for round shank)H60.3 ～ 10 ～ 5.915 ～ 9817 ～ 1001.2 ～ 5.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01D (for round shank)H6.50.3 ～ 10 ～ 6.415 ～ 9817 ～ 1001.5 ～ 6.4-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01D (for round shank)H70.3 ～ 10 ～ 6.415 ～ 9817 ～ 1001.5 ～ 6.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01D (for round shank)H80.3 ～ 10 ～ 7.915 ～ 9817 ～ 1001.6 ～ 7.9-

-

1 Preventivo 10SKH510/-0.005+0.02/0±0.01±0.01±0.01±0.01D (for round shank)H100.3 ～ 10 ～ 9.915 ～ 9817 ～ 1001.6 ～ 9.9-

-

1 Preventivo 10SKD610/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H2-0 ～ 0.715 ～ 9817 ～ 1000.6 ～ 1.9-

-

1 Preventivo 10SKD610/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H2.5-0 ～ 0.915 ～ 9817 ～ 1000.8 ～ 2.4-

-

1 Preventivo 10SKD610/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H3-0 ～ 1.115 ～ 9817 ～ 1001 ～ 2.9-

-

1 Preventivo 10SKD610/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H3.5-0 ～ 1.3515 ～ 9817 ～ 1001 ～ 3.4-

-

1 Preventivo 10SKD610/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H4-0 ～ 1.615 ～ 9817 ～ 1001 ～ 3.9-

-

1 Preventivo 10SKD610/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H4.5-0 ～ 1.8515 ～ 9817 ～ 1001 ～ 4.4-

-

1 Preventivo 10SKD610/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H5-0 ～ 1.915 ～ 9817 ～ 1001.2 ～ 4.9-

-

1 Preventivo 10SKD610/-0.005+0.02/0±0.01±0.01±0.01±0.01B (for round shank)H5.5-0 ～ 2.1515 ～ 9817 ～ 1001.2 ～ 5.4-

Loading...

  1. 1
  2. 2
  3. Avanti >>
 

Configura

Ripristina

104Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Material

    • SKH51
    • SKD61

    Ripristina

  • Shaft diameter tolerance

    • 0/-0.005
    • -0.01/-0.02

    Ripristina

  • L/F dimension tolerance

    • +0.05/0
    • +0.02/0
    • +0.01/0

    Ripristina

  • P dimension tolerance

    • ±0.02
    • ±0.01
    • ±0.005

    Ripristina

  • P-2E tolerance

    • ±0.02
    • ±0.01

    Ripristina

  • W dimension tolerance

    • ±0.02
    • ±0.01
    • ±0.005

    Ripristina

  • W-2E tolerance

    • ±0.02
    • ±0.01
    • ±0.005

    Ripristina

  • Step (Step shape)

    • B (for round shank)
    • C (for round shank)
    • D (for round shank)

    Ripristina

  • D/P (Shaft diameter)(mm)

    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 8
    • 10

    Ripristina

  • C (Tip part)(mm)

     [0.3-1/0.01mmpezzi]

    Ripristina

  • E (Tip part)(mm)

     [0-9.9/0.01mmpezzi]

    Ripristina

  • F (Bearing bore length)(mm)

     [15-98/0.01mmpezzi]

    Ripristina

  • L (L dimension)(mm)

     [17-100/0.01mmpezzi]

    Ripristina

  • P (Tip part)(mm)

     [0.6-9.9/0.01mmpezzi]

    Ripristina

  • W (Tip part)(mm)

     [1.2-5.4/0.01mmpezzi]

    Ripristina

  • Tipo

    • CPD-BD
    • CPD-BE
    • CPD-BF
    • CPD-BG
    • CPD-BH
    • CPD-CF
    • CPD-CG
    • CPD-DD
    • CPD-DE
    • CPD-DF
    • CPD-DG
    • CPD-DH
    • CPH-BD
    • CPH-BE
    • CPH-BF
    • CPH-BG
    • CPH-BH
    • CPH-CF
    • CPH-CG
    • CPH-DD
    • CPH-DE
    • CPH-DF
    • CPH-DG
    • CPH-DH
    • CPP-BD
    • CPP-BE
    • CPP-BF
    • CPP-BG
    • CPP-BH
    • CPP-CF
    • CPP-CG
    • CPP-DD
    • CPP-DE
    • CPP-DF
    • CPP-DG
    • CPP-DH
    • CPV-BD
    • CPV-BE
    • CPV-BF
    • CPV-BG
    • CPV-BH
    • CPV-CF
    • CPV-CG
    • CPV-DD
    • CPV-DE
    • CPV-DF
    • CPV-DG
    • CPV-DH

    Ripristina

  • Shape (Tip shape)

    • D
    • H
    • E
    • F
    • G

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.