• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

TSC series carbide long neck square end mill, 4-flute / long neck model

TSC series carbide long neck square end mill, 4-flute / long neck model

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

  • TSC series carbide long neck square end mill, 4-flute / long neck model
  • TSC series carbide long neck square end mill, 4-flute / long neck model
  • Sconto volumi elevati

MISUMI

MISUMI

[Caratteristiche] -Dimostra elevate prestazioni nella lavorazione di acciai generici, EN 1.4301 Equiv. (SUS304) e acciai trattati termicamente (fino a 50 HRC) -Può selezionare la lunghezza ottimale del corpo per la lavorazione di parti profonde del pezzo -Ottima per la lavorazione nel campo di tornitura medio-basso grazie all'angolo di spirale universale di 30° -Completa il rivestimento con un'elevata resistenza all'ossidazione e un'alta durezza, e raggiunge una lunga durata. Efficace nella lavorazione ad alta velocità e nella lavorazione a secco grazie alle caratteristiche del rivestimento.
  • TS
  • General Steel
  • 4 Flutes

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

TSC series carbide long neck square end mill, 4-flute / long neck model:Related Image

Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
LN-TSC-EM4S1.5-[8-20/1]
LN-TSC-EM4S2-[9-21/1]
LN-TSC-EM4S2.5-[10-22/1]
LN-TSC-EM4S3-[11-21/1]
LN-TSC-EM4S3.5-[12-22/1]
LN-TSC-EM4S4-[13-23/1]
LN-TSC-EM4S5-[15-25/1]
LN-TSC-PEM4S1.5-[8-20/1]
LN-TSC-PEM4S2-[9-21/1]
LN-TSC-PEM4S2.5-[10-22/1]
LN-TSC-PEM4S3-[11-21/1]
LN-TSC-PEM4S3.5-[12-22/1]
LN-TSC-PEM4S4-[13-23/1]
LN-TSC-PEM4S5-[15-25/1]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Outer Diameter (D)
(φ) 		Flute Length (ℓ)
(mm) 		Shank Diameter (d)
(mm) 		Overall Length (L)
(mm) 		Length Under Neck (ℓ1)
(mm) 		Geometry Torsion Angle (θ) Additional Classification Figure ● Inventory Product □ Manufacturer Product Under Neck Diameter d1
(mm) 		Actual Effective Length Depends on Work Inclination Angle 30'
(mm) 		Actual Effective Length Depends on Work Inclination Angle 1°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 2°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 3°
(mm)
1 8 giorni 1.534408 ～ 20Con puntalePowerful Helix (45° to 60°)Manufactured Product3□1.45----
1 8 giorni 244409 ～ 21Con puntalePowerful Helix (45° to 60°)Manufactured Product3□1.95----
1 8 giorni 2.5544010 ～ 22Con puntalePowerful Helix (45° to 60°)Manufactured Product3□2.4----
1 8 giorni 3664511 ～ 21Con puntalePowerful Helix (45° to 60°)Manufactured Product3□2.9----
1 8 giorni 3.5764512 ～ 22Con puntalePowerful Helix (45° to 60°)Manufactured Product3□3.3----
1 8 giorni 4864513 ～ 23Con puntalePowerful Helix (45° to 60°)Manufactured Product3□3.8----
1 8 giorni 51064515 ～ 25Con puntalePowerful Helix (45° to 60°)Manufactured Product3□4.8----
1 8 giorni 1.534408 ～ 20Sharp CornerPowerful Helix (45° to 60°)Manufactured Product3□1.45----
1 8 giorni 244409 ～ 21Sharp CornerPowerful Helix (45° to 60°)Manufactured Product3□1.95----
1 8 giorni 2.5544010 ～ 22Sharp CornerPowerful Helix (45° to 60°)Manufactured Product3□2.4----
1 8 giorni 3664511 ～ 21Sharp CornerPowerful Helix (45° to 60°)Manufactured Product3□2.9----
1 8 giorni 3.5764512 ～ 22Sharp CornerPowerful Helix (45° to 60°)Manufactured Product3□3.3----
1 8 giorni 4864513 ～ 23Sharp CornerPowerful Helix (45° to 60°)Manufactured Product3□3.8----
1 8 giorni 51064515 ～ 25Sharp CornerPowerful Helix (45° to 60°)Manufactured Product3□4.8----

Loading...

  1. 1

Specifiche

TSC series carbide long neck square end mill, 4-flute / long neck model:Related Image
Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
1 4 ● ● 1.5 0.95 50 4 4.19 4.40 4.88 5.49 1
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
1.2 6 ● ● 1.8 1.15 50 4 6.28 6.59 7.32 8.24 1
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
16 ● ● 16.75 17.58 19.53 21.97
1.3 6 No Standards ● 1.9 1.25 50 4 6.28 6.59 7.32 8.24 1
10 No Standards ● 10.47 10.99 12.21 13.73
1.4 6 No Standards ● 2.1 1.35 50 4 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
14 No Standards ● 14.66 15.39 17.09 19.22


Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
1.5 6 ● ● 2.3 1.45 50 4 6.28 6.59 7.32 8.24 1
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 ● ● 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 21.97
18 ● ● 70 18.85 19.78 21.97 24.71
20 ● ● 20.94 21.98 24.41 Without Interference
1.6 6 No Standards ● 2.4 1.55 50 4 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
1.7 6 No Standards ● 2.5 1.65 50 4 6.28 6.59 7.32 8.24 1
16 No Standards ● 16.75 17.58 19.53 21.97
1.8 6 No Standards ● 2.7 1.75 50 4 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 Without Interference
20 No Standards ● 70 20.94 21.98 24.41 Without Interference
25 No Standards ● 26.18 27.47 30.51 Without Interference
2 6 ● ● 3 1.95 50 4 6.28 6.59 7.32 8.24 1
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 ● ● 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 Without Interference
18 ● ● 70 18.85 19.78 21.97 Without Interference
20 ● ● 20.94 21.98 24.41 Without Interference
25 ● ● 26.18 27.47 Without Interference Without Interference
30 ● ● 31.41 32.97 Without Interference Without Interference
2.5 8 ● ● 3.8 2.4 50 4 8.38 8.79 9.76 10.98 1
12 ● ● 12.57 13.19 14.65 Without Interference
16 ● ● 16.75 17.58 19.53 Without Interference
20 ● ● 70 20.94 21.98 Without Interference Without Interference
25 ● ● 26.18 27.47 Without Interference Without Interference


Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
3 8 No Standards ● 4.5 2.9 50 6 8.38 8.79 9.76 10.98 1
12 ● ● 12.57 13.19 14.65 16.48
16 ● ● 70 16.75 17.58 19.53 21.97
20 ● ● 20.94 21.98 24.41 27.46
25 ● ● 26.18 27.47 30.51 Without Interference
30 ● ● 31.41 32.97 36.62 Without Interference
40 ● ● 100 41.88 43.96 Without Interference Without Interference
3.5 16 No Standards ● 5.5 3.35 70 6 16.75 17.58 19.53 21.97 1
25 No Standards ● 26.18 27.47 30.51 Without Interference
35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
4 12 No Standards ● 6 3.8 50 6 12.57 13.19 14.65 16.48 1
16 ● ● 16.75 17.58 19.53 Without Interference
20 ● ● 70 20.94 21.98 24.41 Without Interference
30 ● ● 31.41 32.97 Without Interference Without Interference
35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
40 ● ● 41.88 43.96 Without Interference Without Interference
45 No Standards ● 47.12 49.45 Without Interference Without Interference
50 No Standards ● 52.35 54.95 Without Interference Without Interference
5 16 ● ● 7.5 4.8 70 6 16.75 17.58 Without Interference Without Interference 1
25 ● ● 26.18 27.47 Without Interference Without Interference
35 ● ● 100 36.65 Without Interference Without Interference Without Interference
50 ● ● 52.35 Without Interference Without Interference Without Interference
6 20 ● ● 9 5.8 70 6 Without Interference Without Interference Without Interference Without Interference 2
30 ● ● Without Interference Without Interference Without Interference Without Interference
40 ● ● 100 Without Interference Without Interference Without Interference Without Interference
50 ● ● Without Interference Without Interference Without Interference Without Interference


Model Number
LN-TSC-PEM4S (Sharp Edge / Manufactured Product) / EM4S (Standard / Manufactured Product)

Outer Diameter
D		 Length Under Neck ℓ1
1 mm Increment Designation		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Figure
1.5 8 ~ 20 ● ● 3 1.45 40 4 3
2 9 ~ 21 ● ● 4 1.95 40 4 3
2.5 10 ~ 22 ● ● 5 2.4 40 4 3
3 11 ~ 21 ● ● 6 2.9 45 6 3
3.5 12 ~ 22 ● ● 7 3.3 45 6 3
4 13 ~ 23 ● ● 8 3.8 45 6 3
5 15 ~ 25 ● ● 10 4.8 45 6 3

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number
For Cutting Conditions, Refer to >>Click here.

Più Informazioni


● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.


TSC series carbide long neck square end mill, 4-flute / long neck model:Related Image

Informazioni di base

Work Material General Steel / Heat-Treated Steel / Acciaio inox / Ghisa / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 4 Model Long Neck Square
Coating For High Hardness (Silicone-Based) Processing Applications Flat Surface / Side Surface / Inclined Cutting Tolerance of OD(mm) 0 ~ -0.02

Configura

Ripristina

14Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Outer Diameter (D)(φ)

    • 1
    • 1.2
    • 1.3
    • 1.4
    • 1.5
    • 1.6
    • 1.7
    • 1.8
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 5
    • 6

    Ripristina

  • Flute Length (ℓ)(mm)

    • 1.5
    • 1.8
    • 1.9
    • 2.1
    • 2.3
    • 2.4
    • 2.5
    • 2.7
    • 3
    • 3.8
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 7
    • 7.5
    • 8
    • 9
    • 10

    Ripristina

  • Shank Diameter (d)(mm)

    • 4
    • 6

    Ripristina

  • Overall Length (L)(mm)

    • 40
    • 45
    • 50
    • 70
    • 100

    Ripristina

  • Length Under Neck (ℓ1)(mm)

    • 4
    • 6
    • 8
    • 10
    • 12
    • 14
    • 16
    • 18
    • 20
    • 25
    • 30
    • 35
    • 40
    • 45
    • 50

     [8-25/1mmpezzi]

    Ripristina

  • Geometry

    • Sharp Corner
    • Con puntale

    Ripristina

  • Additional Classification

    • Manufactured Product
    • Stocked Product

    Ripristina

  • Tipo

    • LN-TSC-EM4S
    • LN-TSC-PEM4S
    • TSC-EM4LB
    • TSC-PEM4LB

    Ripristina

  • Torsion Angle (θ)

    • Standard Helix (30 to 40°)
    • Powerful Helix (45° to 60°)

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • 5 giorni o meno
    • 8 giorni o meno

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.