• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model

TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

  • TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model
  • TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model
  • Sconto volumi elevati

MISUMI

MISUMI

[Caratteristiche] -Dimostra elevate prestazioni nella lavorazione di acciai generici, EN 1.4301 Equiv. (SUS304) e acciai trattati termicamente (fino a 50 HRC) -Tipo multifunzionale a collo lungo quadrato con elevata capacità di avanzamento ed eccellente durata -L'angolo di elica di 45° lo rende ideale per la lavorazione ad alta velocità rispetto all'angolo di elica generale di 30° -Ha un rivestimento con elevata resistenza all'ossidazione e alta durezza e raggiunge una lunga durata. Efficace nella lavorazione ad alta velocità e nella lavorazione a secco come caratteristiche del rivestimento.
  • TS
  • General Steel
  • 3 Flutes

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model:Related Image

Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
LN-TSC-HEM3S1.5-[10-33/1]
LN-TSC-HEM3S2-[11-34/1]
LN-TSC-HEM3S2.5-[13-35/1]
LN-TSC-HEM3S3-[13-36/1]
LN-TSC-HEM3S4-[16-38/1]
LN-TSC-HEM3S5-[18-40/1]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Outer Diameter (D)
(φ) 		Flute Length (ℓ)
(mm) 		Shank Diameter (d)
(mm) 		Overall Length (L)
(mm) 		Length Under Neck (ℓ1)
(mm) 		Processing Applications Additional Classification Figure ● Inventory Product □ Manufacturer Product Under Neck Diameter d1
(mm) 		Actual Effective Length Depends on Work Inclination Angle 30'
(mm) 		Actual Effective Length Depends on Work Inclination Angle 1°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 2°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 3°
(mm)
1 8 giorni 1.54.566010 ～ 33Flat Surface / Side Surface / Scanalatura / Thrust (Z-Feed) / Inclined Cutting / CountersunkManufactured Product3□1.45----
1 8 giorni 2666011 ～ 34Flat Surface / Side Surface / Scanalatura / Thrust (Z-Feed) / Inclined Cutting / CountersunkManufactured Product3□1.95----
1 8 giorni 2.57.566013 ～ 35Flat Surface / Side Surface / Scanalatura / Thrust (Z-Feed) / Inclined Cutting / CountersunkManufactured Product3□2.4----
1 8 giorni 3865013 ～ 36Flat Surface / Side Surface / Scanalatura / Thrust (Z-Feed) / Inclined Cutting / CountersunkManufactured Product3□2.9----
1 8 giorni 41166016 ～ 38Flat Surface / Side Surface / Scanalatura / Thrust (Z-Feed) / Inclined Cutting / CountersunkManufactured Product3□3.8----
1 8 giorni 51366018 ～ 40Flat Surface / Side Surface / Scanalatura / Thrust (Z-Feed) / Inclined Cutting / CountersunkManufactured Product3□4.8----

Loading...

  1. 1

Specifiche

TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model:Related Image

Model Number
TSC-HEM3LB (Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
1 4 1.5 0.95 50 4 4.19 4.40 4.88 5.49 1
6 6.28 6.59 7.32 8.24
8 8.38 8.79 9.76 10.98
10 10.47 10.99 12.21 13.73
12 12.57 13.19 14.65 16.48
16 16.75 17.58 19.53 21.97
20 70 20.94 21.98 24.41 27.46
25 26.18 27.47 30.51 Without Interference
1.2 6 1.8 1.15 50 4 6.28 6.59 7.32 8.24 1
8 8.38 8.79 9.76 10.98
10 10.47 10.99 12.21 13.73
12 12.57 13.19 14.65 16.48
16 16.75 17.58 19.53 21.97
1.5 6 2.3 1.45 50 4 6.28 6.59 7.32 8.24 1
8 8.38 8.79 9.76 10.98
10 10.47 10.99 12.21 13.73
12 12.57 13.19 14.65 16.48
16 16.75 17.58 19.53 21.97
20 70 20.94 21.98 24.41 Without Interference
2 8 3 1.95 50 4 8.38 8.79 9.76 10.98 1
10 10.47 10.99 12.21 13.73
12 12.57 13.19 14.65 16.48
14 14.66 15.39 17.09 19.22
16 16.75 17.58 19.53 Without Interference


Model Number
TSC-HEM3LB (Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
2 18 3 1.95 70 4 18.85 19.78 21.97 Without Interference 1
20 20.94 21.98 24.41 Without Interference
25 26.18 27.47 Without Interference Without Interference
30 31.41 32.97 Without Interference Without Interference
2.5 8 3.75 2.4 50 4 8.38 8.79 9.76 10.98 1
12 12.57 13.19 14.65 Without Interference
16 16.75 17.58 19.53 Without Interference
20 70 20.94 21.98 Without Interference Without Interference
25 26.18 27.47 Without Interference Without Interference
30 31.41 32.97 Without Interference Without Interference
3 8 4.5 2.9 70 6 8.38 8.79 9.76 10.98 1
12 12.57 13.19 14.65 16.48
16 16.75 17.58 19.53 21.97
20 20.94 21.98 24.41 27.46
25 26.18 27.47 30.51 Without Interference
30 31.41 32.97 36.62 Without Interference
40 100 41.88 43.96 Without Interference Without Interference
4 16 6 3.8 50 6 16.75 17.58 19.53 Without Interference 1
20 70 20.94 21.98 24.41 Without Interference
30 31.41 32.97 Without Interference Without Interference
40 100 41.88 43.96 Without Interference Without Interference
5 16 7.5 4.8 70 6 16.75 17.58 Without Interference Without Interference 1
25 26.18 27.47 Without Interference Without Interference
35 100 36.65 Without Interference Without Interference Without Interference
50 52.35 Without Interference Without Interference Without Interference
6 20 9 5.8 70 6 Without Interference Without Interference Without Interference Without Interference 2
30 Without Interference Without Interference Without Interference Without Interference
40 100 Without Interference Without Interference Without Interference Without Interference
50 Without Interference Without Interference Without Interference Without Interference
60 Without Interference Without Interference Without Interference Without Interference


For Cutting Conditions, Refer to >>Click here.

Model Number
LN-TSC-HEM3S (Manufactured Product) 

Outer Diameter
D		 Length Under Neck ℓ1
1 mm Increment Designation		 Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Figure
1.5 10 ~ 33 4.5 1.45 60 6 3
2 11 ~ 34 6 1.95 60 6 3
2.5 13 ~ 35 7.5 2.4 60 6 3
3 13 ~ 36 8 2.9 50 6 3
4 16 ~ 38 11 3.8 60 6 3
5 18 ~ 40 13 4.8 60 6 3

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number

For Cutting Conditions, Refer to >>Click here.

Più Informazioni


● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Delivers a finish with very good surface roughness after machining.

TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model:Related Image

Informazioni di base

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acciaio inox / Ghisa / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 3 Model Long Neck Square
Coating For High Hardness (Silicone-Based) Geometry Con puntale Torsion Angle (θ) Powerful Helix (45° to 60°)
Tolerance of OD(mm) 0 ~ -0.02

Configura

Ripristina

6Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Outer Diameter (D)(φ)

    • 1
    • 1.2
    • 1.5
    • 2
    • 2.5
    • 3
    • 4
    • 5
    • 6

    Ripristina

  • Flute Length (ℓ)(mm)

    • 1.5
    • 1.8
    • 2.3
    • 3
    • 3.75
    • 4.5
    • 6
    • 7.5
    • 8
    • 9
    • 11
    • 13

    Ripristina

  • Shank Diameter (d)(mm)

    • 4
    • 6

    Ripristina

  • Overall Length (L)(mm)

    • 50
    • 60
    • 70
    • 100

    Ripristina

  • Length Under Neck (ℓ1)(mm)

    • 4
    • 6
    • 8
    • 10
    • 12
    • 14
    • 16
    • 18
    • 20
    • 25
    • 30
    • 35
    • 40
    • 50
    • 60

     [10-40/1mmpezzi]

    Ripristina

  • Additional Classification

    • Manufactured Product
    • Stocked Product

    Ripristina

  • Tipo

    • LN-TSC-HEM3S
    • TSC-HEM3LB

    Ripristina

  • Processing Applications

    • Flat Surface
    • Side Surface
    • Scanalatura
    • Thrust (Z-Feed)
    • Inclined Cutting
    • Countersunk

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • 5 giorni o meno
    • 8 giorni o meno

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.