TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model (TSC-HEM3LB3-25)
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
- Sconto volumi elevati
Dettagli del prodotto:
Codice articolo del costruttore: TSC-HEM3LB3-25
Marca: MISUMI
Prezzo: 42.65 €
Tempi di consegna: 5 giorni
Dati Tecnici:
Outer Diameter (D): 3 φ
Flute Length (ℓ): 4.5 mm
Shank Diameter (d): 6 mm
Overall Length (L): 70 mm
Length Under Neck (ℓ1): 25 mm
- TS
- General Steel
- 3 Flutes
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
TSC-HEM3LB3-25
Codice componente
|
|---|
| TSC-HEM3LB3-25 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
42.65 € | 1 | Disponibile | 5 giorni | 3 | 4.5 | 6 | 70 | 25 | Flat Surface / Side Surface / Scanalatura / Inclined Cutting | Stocked Product | 1 | ● | 2.9 | 26.18 | 27.47 | 30.51 | Without Interference |
Loading...
Specifiche
Model Number
TSC-HEM3LB (Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||
| 1 | 4 | 1.5 | 0.95 | 50 | 4 | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
| 6 | 6.28 | 6.59 | 7.32 | 8.24 | ||||||
| 8 | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 16 | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 20 | 70 | 20.94 | 21.98 | 24.41 | 27.46 | |||||
| 25 | 26.18 | 27.47 | 30.51 | Without Interference | ||||||
| 1.2 | 6 | 1.8 | 1.15 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 16 | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 1.5 | 6 | 2.3 | 1.45 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 16 | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 20 | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||
| 2 | 8 | 3 | 1.95 | 50 | 4 | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 10 | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 14 | 14.66 | 15.39 | 17.09 | 19.22 | ||||||
| 16 | 16.75 | 17.58 | 19.53 | Without Interference | ||||||
Model Number
TSC-HEM3LB (Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||
| 2 | 18 | 3 | 1.95 | 70 | 4 | 18.85 | 19.78 | 21.97 | Without Interference | 1 |
| 20 | 20.94 | 21.98 | 24.41 | Without Interference | ||||||
| 25 | 26.18 | 27.47 | Without Interference | Without Interference | ||||||
| 30 | 31.41 | 32.97 | Without Interference | Without Interference | ||||||
| 2.5 | 8 | 3.75 | 2.4 | 50 | 4 | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 12 | 12.57 | 13.19 | 14.65 | Without Interference | ||||||
| 16 | 16.75 | 17.58 | 19.53 | Without Interference | ||||||
| 20 | 70 | 20.94 | 21.98 | Without Interference | Without Interference | |||||
| 25 | 26.18 | 27.47 | Without Interference | Without Interference | ||||||
| 30 | 31.41 | 32.97 | Without Interference | Without Interference | ||||||
| 3 | 8 | 4.5 | 2.9 | 70 | 6 | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 12 | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 16 | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 20 | 20.94 | 21.98 | 24.41 | 27.46 | ||||||
| 25 | 26.18 | 27.47 | 30.51 | Without Interference | ||||||
| 30 | 31.41 | 32.97 | 36.62 | Without Interference | ||||||
| 40 | 100 | 41.88 | 43.96 | Without Interference | Without Interference | |||||
| 4 | 16 | 6 | 3.8 | 50 | 6 | 16.75 | 17.58 | 19.53 | Without Interference | 1 |
| 20 | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||
| 30 | 31.41 | 32.97 | Without Interference | Without Interference | ||||||
| 40 | 100 | 41.88 | 43.96 | Without Interference | Without Interference | |||||
| 5 | 16 | 7.5 | 4.8 | 70 | 6 | 16.75 | 17.58 | Without Interference | Without Interference | 1 |
| 25 | 26.18 | 27.47 | Without Interference | Without Interference | ||||||
| 35 | 100 | 36.65 | Without Interference | Without Interference | Without Interference | |||||
| 50 | 52.35 | Without Interference | Without Interference | Without Interference | ||||||
| 6 | 20 | 9 | 5.8 | 70 | 6 | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
| 30 | Without Interference | Without Interference | Without Interference | Without Interference | ||||||
| 40 | 100 | Without Interference | Without Interference | Without Interference | Without Interference | |||||
| 50 | Without Interference | Without Interference | Without Interference | Without Interference | ||||||
| 60 | Without Interference | Without Interference | Without Interference | Without Interference | ||||||
For Cutting Conditions, Refer to >>Click here.
Model Number
LN-TSC-HEM3S (Manufactured Product)
| Outer Diameter D |
Length Under Neck ℓ1 1 mm Increment Designation |
Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Figure |
| 1.5 | 10 ~ 33 | 4.5 | 1.45 | 60 | 6 | 3 |
| 2 | 11 ~ 34 | 6 | 1.95 | 60 | 6 | 3 |
| 2.5 | 13 ~ 35 | 7.5 | 2.4 | 60 | 6 | 3 |
| 3 | 13 ~ 36 | 8 | 2.9 | 50 | 6 | 3 |
| 4 | 16 ~ 38 | 11 | 3.8 | 60 | 6 | 3 |
| 5 | 18 ~ 40 | 13 | 4.8 | 60 | 6 | 3 |
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number
For Cutting Conditions, Refer to >>Click here.
Più Informazioni
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Delivers a finish with very good surface roughness after machining. 
Informazioni di base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acciaio inox / Ghisa / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 3 | Model | Long Neck Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Geometry | Con puntale | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| Tolerance of OD(mm) | 0 ~ -0.02 |
Si trova sulla pagina di TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model, il codice articolo è il seguente: TSC-HEM3LB3-25.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto TSC-HEM3LB3-25.
Configura
Proprietà di base
-
Processing Applications
- Flat Surface
- Side Surface
- Scanalatura
- Thrust (Z-Feed)
- Inclined Cutting
- Countersunk
-
Tipo
- LN-TSC-HEM3S
- TSC-HEM3LB
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Additional Classification
- Manufactured Product
- Stocked Product
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
- 8 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| TSC-HEM3LB1-20 |
| TSC-HEM3LB1-25 |
| TSC-HEM3LB1-4 |
| TSC-HEM3LB3-30 |
| TSC-HEM3LB3-40 |
| TSC-HEM3LB3-8 |
| Codice componente | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
41.41 € | 1 | Disponibile | 5 giorni | 1 | 1.5 | 4 | 70 | 20 | Inclined Cutting / Scanalatura / Flat Surface / Side Surface | Stocked Product | 1 | ● | 0.95 | 20.94 | 21.98 | 24.41 | 27.46 | |
49.56 € | 1 | Disponibile | 5 giorni | 1 | 1.5 | 4 | 70 | 25 | Inclined Cutting / Scanalatura / Flat Surface / Side Surface | Stocked Product | 1 | ● | 0.95 | 26.18 | 27.47 | 30.51 | Without Interference | |
35.56 € | 1 | Disponibile | 5 giorni | 1 | 1.5 | 4 | 50 | 4 | Inclined Cutting / Scanalatura / Flat Surface / Side Surface | Stocked Product | 1 | ● | 0.95 | 4.19 | 4.4 | 4.88 | 5.49 | |
57.48 € | 1 | Disponibile | 5 giorni | 3 | 4.5 | 6 | 70 | 30 | Inclined Cutting / Scanalatura / Flat Surface / Side Surface | Stocked Product | 1 | ● | 2.9 | 31.41 | 32.97 | 36.62 | Without Interference | |
53.60 € | 1 | Disponibile | 5 giorni | 3 | 4.5 | 6 | 100 | 40 | Inclined Cutting / Scanalatura / Flat Surface / Side Surface | Stocked Product | 1 | ● | 2.9 | 41.88 | 43.96 | Without Interference | Without Interference | |
48.68 € | 1 | Disponibile | 5 giorni | 3 | 4.5 | 6 | 70 | 8 | Inclined Cutting / Scanalatura / Flat Surface / Side Surface | Stocked Product | 1 | ● | 2.9 | 8.38 | 8.79 | 9.76 | 10.98 |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.