TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
- Sconto volumi elevati
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Codice componente
|
|---|
| TSC-MCR-HFEM3S4 |
| TSC-MCR-HFEM3S6 |
| TSC-MCR-HFEM3S8 |
| TSC-MCR-HFEM3S10 |
| TSC-MCR-HFEM3S12 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Figure | Shoulder Radius R1 (mm) | Base Radius R2 (mm) | Approximate R-Value (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
155.77 € | 1 | Disponibile | 5 giorni | 4 | 0.813 | 8 | 50 | 6 | 1 | 0.5 | 4 | 0.813 | |
144.66 € | 1 | Disponibile | 5 giorni | 6 | 1.219 | 10 | 70 | 6 | 2 | 0.5 | 9 | 1.219 | |
117.55 € | 1 | Disponibile | 5 giorni | 8 | 1.625 | 16 | 80 | 8 | 2 | 1 | 12 | 1.625 | |
164.22 € | 1 | Disponibile | 5 giorni | 10 | 2.031 | 20 | 90 | 10 | 2 | 1.5 | 15 | 2.031 | |
206.91 € | 1 | Disponibile | 5 giorni | 12 | 2.438 | 24 | 100 | 12 | 2 | 1.5 | 18 | 2.438 |
Loading...
Specifiche
Model Number
TSC-MCR-HFEM3S
| Outer Diameter D |
Shoulder Radius R1 |
Base Radius R2 |
Approximate R-Value | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure |
| 4 | 0.5 | 4 | 0.813 | 8 | 50 | 6 | 1 |
| 6 | 0.5 | 9 | 1.219 | 10 | 70 | 6 | 2 |
| 8 | 1 | 12 | 1.625 | 16 | 80 | 8 | 2 |
| 10 | 1.5 | 15 | 2.031 | 20 | 90 | 10 | 2 |
| 12 | 1.5 | 18 | 2.438 | 24 | 100 | 12 | 2 |
For Cutting Conditions, Refer to >>Click here.
Più Informazioni
● The shoulder R and base R composite radius eliminate the medium finishing process by (1), enabling high-speed feeding due to thin chippings when bottom-surface machining, and by (2), minimizing the cusp height (leftover) when machining lines at the same height.
● The TS coat consisting of a nitride-based composite film with a fully crystalline structure means that it realizes a high oxidation resistance temperature and high hardness. Ideal for high-speed machining and dry machining of anything from raw carbon steel materials through to heat-treated / high hardness steel.
[ ! ]This product has a special groove shape with a performance that may not be reproducible without the use of Misumi's dedicated re-grinding. 
Informazioni di base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Acciaio inox / Ghisa | Number of Flutes(sheet) | 3 | Model | Raggio elevato avanzamento |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| Additional Classification | Stocked Product |
Configura
Proprietà di base
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Tipo
- TSC-MCR-HFEM3S
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.