Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
- Sconto volumi elevati
- Non-Coated
- Aluminum
- 3 Flutes
- B (Stub)
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Codice componente
|
|---|
| SEC-SS-ALHEM3B6.2 |
| SEC-SS-ALHEM3B8.2 |
| SEC-SS-ALHEM3B10.2 |
| SEC-SS-ALHEM3B12.2 |
| SEC-SS-ALHEM3B16.2 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | |
|---|---|---|---|---|---|---|---|---|
72.20 € | 1 | Disponibile | 5 giorni | 6.2 | 9 | 6 | 80 | |
107.27 € | 1 | Disponibile | 5 giorni | 8.2 | 12 | 8 | 100 | |
127.70 € | 1 | Disponibile | 5 giorni | 10.2 | 15 | 10 | 130 | |
140.36 € | 1 | Disponibile | 5 giorni | 12.2 | 18 | 12 | 150 | |
338.16 € | 1 | Disponibile | 5 giorni | 16.2 | 24 | 16 | 180 |
Loading...
Specifiche
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | |
| Outer Diameter D |
|||||
| SEC-SS-ALHEM3B | 6.2 | 9 | 80 | 6 | 2 |
| 8.2 | 12 | 100 | 8 | 2 | |
| 10.2 | 15 | 130 | 10 | 2 | |
| 12.2 | 18 | 150 | 12 | 2 | |
| 16.2 | 24 | 180 | 16 | 2 |
For Cutting Conditions, Refer to >>Click here.
Più Informazioni
● Adopts a sharp cutting edge that prevents the built-up edge that is unique to aluminum.
● The shank relief also makes it suitable in cases where tool interference may be an issue.
● The corners of the blade tip are slightly rounded to prevent chipping when cutting.
● The rounded edge of the blade rear end suppresses machining streaks caused by multi-stage machining of side surfaces. (SEC-LS-ALHEM3B Characteristics)
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth. (SEC-SS-ALHEM3B Characteristics)
● It adopts a 3-flute shape to be strong against chatter and is capable of high-speed, high-efficiency machining of grooves. (SEC-SS-ALHEM3B Characteristics)
Informazioni di base
| Work Material | Aluminum Alloy / Copper Alloy / Grafite / Resina | Number of Flutes(sheet) | 3 | Model | Tipo quadrato |
|---|---|---|---|---|---|
| Coating | Senza rivestimento | Processing Applications | Flat Surface / Side Surface / Scanalatura / Inclined Cutting | Geometry | Ultra-Small R |
| Torsion Angle (θ) | Powerful Helix (45° to 60°) | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
| ● Inventory Product □ Manufacturer Product | ● |
Configura
Proprietà di base
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Tipo
- SEC-SS-ALHEM3B
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.