Codice articolo del costruttore: MFM-1618-12
Marca: IGUS
Prezzo: 4.02 €
Tempi di consegna: 2 giorni
Diametro interno d1: - Ø
D.E. d2: - Ø
Lunghezza complessiva b1: - mm
Spessore T: - mm
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
MFM-1618-12
General properties | Unit | iglidur® M250 | Testing method |
Density | g/cm3 | 1.14 | |
Colour | charcoal | ||
Max. moisture absorption at +23 °C/50 % r.h. | % weight | 1.4 | DIN 53495 |
Max. water absorption | % weight | 7.6 | |
Coefficient of sliding friction, dynamic, against steel | μ | 0.18–0.40 | |
pv value, max. (dry) | MPa · m/s | 0.12 | |
Mechanical properties | |||
Flexural modulus | MPa | 2,700 | DIN 53457 |
Flexural strength at +20 °C | MPa | 112 | DIN 53452 |
Compressive strength | MPa | 52 | |
Max. recommended surface pressure (+20 °C) | MPa | 20 | |
Shore-D hardness | 79 | DIN 53505 | |
Physical and thermal properties | |||
Max. long-term application temperature | °C | +80 | |
Max. short-term application temperature | °C | +170 | |
Min. long-term application temperature | °C | –40 | |
Heat conductivity | W/m · K | 0.24 | ASTM C 177 |
Coefficient of thermal expansion (at +23 °C) | K–1 · 10–5 | 10 | DIN 53752 |
Electrical properties | |||
Specific contact resistance | Ωcm | > 1013 | DIN IEC 93 |
Surface resistance | Ω | > 1011 | DIN 53482 |
Chamfer in relation to the d1 | ||||
d1 [mm]: | Ø 1–6 | Ø 6–12 | Ø 12–30 | Ø > 30 |
f [mm]: | 0.3 | 0.5 | 0.8 | 1.2 |
d1 | d1- | d2 | d3 | b1 | b2 | Part No. |
Tolerance3) | d13 | h13 | –0.14 | |||
1.0 | +0.020 +0.080 | 3.0 | 5.0 | 2.0 | 1.0 | MFM-0103-02 |
1.5 | 4.0 | 6.0 | 2.0 | 1.0 | MFM-0104-02 | |
2.0 | 5.0 | 8.0 | 3.0 | 1.5 | MFM-0205-03 | |
2.5 | 6.0 | 9.0 | 3.0 | 1.5 | MFM-0206-03 | |
3.0 | 6.0 | 9.0 | 4.0 | 1.5 | MFM-0306-04 | |
4.0 | +0.030 +0.105 | 8.0 | 12.0 | 4.0 | 2.0 | MFM-0408-04 |
4.0 | 8.0 | 12.0 | 6.0 | 2.0 | MFM-0408-06 | |
4.0 | 8.0 | 12.0 | 8.0 | 2.0 | MFM-0408-08 | |
5.0 | 9.0 | 13.0 | 5.0 | 2.0 | MFM-0509-05 | |
5.0 | 9.0 | 13.0 | 6.0 | 2.0 | MFM-0509-06 | |
5.0 | 9.0 | 13.0 | 8.0 | 2.0 | MFM-0509-08 | |
6.0 | 8.0 | 12.0 | 4.0 | 1.0 | MFM-0608-04 | |
6.0 | 8.0 | 12.0 | 8.0 | 1.0 | MFM-0608-08 | |
6.0 | 10.0 | 14.0 | 4.0 | 2.0 | MFM-0610-04 | |
6.0 | 10.0 | 14.0 | 6.0 | 2.0 | MFM-0610-06 | |
6.0 | 10.0 | 14.0 | 10.0 | 2.0 | MFM-0610-10 | |
6.0 | 11.0 | 14.0 | 4.0 | 2.0 | MFM-0611-04 | |
6.0 | 12.0 | 14.0 | 6.0 | 3.0 | MFM-0612-06 | |
6.0 | 12.0 | 14.0 | 10.0 | 3.0 | MFM-0612-10 | |
7.0 | +0.040 +0.130 | 11.0 | 15.0 | 6.0 | 2.0 | MFM-0711-06 |
7.0 | 11.0 | 15.0 | 8.0 | 2.0 | MFM-0711-08 | |
8.0 | 9.0 | 13.0 | 5.5 | 0.5 | MFM-0809-055 | |
8.0 | 10.0 | 15.0 | 5.5 | 1.0 | MFM-0810-05 | |
8.0 | 10.0 | 15.0 | 7.5 | 1.0 | MFM-0810-07 | |
8.0 | 10.0 | 15.0 | 9.5 | 1.0 | MFM-0810-09 | |
8.0 | 11.0 | 13.0 | 5.0 | 2.0 | MFM-0811-05 | |
8.0 | 11.0 | 13.0 | 8.0 | 2.0 | MFM-0811-08 | |
8.0 | 12.0 | 16.0 | 6.0 | 2.0 | MFM-0812-06 | |
8.0 | 12.0 | 16.0 | 8.0 | 2.0 | MFM-0812-08 | |
8.0 | 12.0 | 16.0 | 12.0 | 2.0 | MFM-0812-12 | |
8.0 | 14.0 | 18.0 | 6.0 | 3.0 | MFM-0814-06 | |
8.0 | 14.0 | 18.0 | 10.0 | 3.0 | MFM-0814-10 | |
8.0 | 14.0 | 16.0 | 6.0 | 3.0 | MFM-081416-06 | |
8.0 | 14.0 | 16.0 | 10.0 | 3.0 | MFM-081416-10 | |
9.0 | 14.0 | 19.0 | 6.0 | 2.0 | MFM-0914-06 | |
9.0 | 14.0 | 19.0 | 10.0 | 2.0 | MFM-0914-10 | |
9.0 | 14.0 | 19.0 | 14.0 | 2.0 | MFM-0914-14 | |
10.0 | 12.0 | 18.0 | 7.0 | 1.0 | MFM-1012-07 | |
10.0 | 12.0 | 18.0 | 9.0 | 1.0 | MFM-1012-09 | |
10.0 | 12.0 | 18.0 | 12.0 | 1.0 | MFM-1012-12 | |
10.0 | 12.0 | 18.0 | 17.0 | 1.0 | MFM-1012-17 | |
10.0 | 14.0 | 19.0 | 9.0 | 2.0 | MFM-1014-09 | |
10.0 | 14.0 | 19.0 | 10.0 | 2.0 | MFM-1014-10 | |
10.0 | 14.0 | 17.5 | 14.0 | 1.0 | MFM-1014-14 | |
10.0 | 14.0 | 17.5 | 19.0 | 1.0 | MFM-1014-19 | |
10.0 | 14.0 | 17.5 | 24.0 | 1.0 | MFM-1014-24 | |
10.0 | 14.0 | 17.5 | 34.0 | 1.0 | MFM-1014-34 | |
10.0 | 14.0 | 19.0 | 8.0 | 2.0 | MFM-101419-08 | |
10.0 | 14.0 | 19.0 | 12.0 | 1.5 | MFM-101419-12 | |
10.0 | 14.0 | 20.0 | 12.0 | 2.0 | MFM-101420-12 | |
10.0 | 16.0 | 22.0 | 8.0 | 3.0 | MFM-1016-08 | |
10.0 | 16.0 | 22.0 | 10.0 | 3.0 | MFM-1016-10 | |
10.0 | 16.0 | 22.0 | 16.0 | 3.0 | MFM-1016-16 | |
10.0 | 16.0 | 20.0 | 6.0 | 3.0 | MFM-101620-06 | |
10.0 | 16.0 | 20.0 | 10.0 | 3.0 | MFM-101620-10 | |
12.0 | +0.050 +0.160 | 14.0 | 20.0 | 7.0 | 1.0 | MFM-1214-07 |
12.0 | 14.0 | 20.0 | 9.0 | 1.0 | MFM-1214-09 | |
12.0 | 14.0 | 20.0 | 12.0 | 1.0 | MFM-1214-12 | |
12.0 | 14.0 | 20.0 | 17.0 | 1.0 | MFM-1214-17 | |
12.0 | 16.0 | 22.0 | 10.0 | 2.0 | MFM-1216-10 | |
12.0 | 16.0 | 22.0 | 20.0 | 2.0 | MFM-1216-20 | |
12.0 | 18.0 | 24.0 | 8.0 | 3.0 | MFM-1218-08 | |
12.0 | 18.0 | 22.0 | 10.0 | 3.0 | MFM-1218-10 | |
12.0 | 18.0 | 24.0 | 12.0 | 3.0 | MFM-1218-12 | |
12.0 | 18.0 | 22.0 | 15.0 | 3.0 | MFM-1218-15 | |
12.0 | 18.0 | 22.0 | 20.0 | 3.0 | MFM-1218-20 | |
13.0 | 15.0 | 20.0 | 14.0 | 2.0 | MFM-1315-14 | |
13.0 | 16.0 | 24.0 | 8.0 | 2.0 | MFM-131624-08 | |
14.0 | 16.0 | 22.0 | 12.0 | 1.0 | MFM-1416-12 | |
14.0 | 16.0 | 22.0 | 17.0 | 1.0 | MFM-1416-17 | |
14.0 | 20.0 | 25.0 | 7.0 | 3.0 | MFM-1420-07 | |
14.0 | 20.0 | 25.0 | 10.0 | 3.0 | MFM-1420-10 | |
14.0 | 20.0 | 25.0 | 15.0 | 3.0 | MFM-1420-15 | |
14.0 | 20.0 | 25.0 | 20.0 | 3.0 | MFM-1420-20 | |
15.0 | 17.0 | 23.0 | 9.0 | 1.0 | MFM-1517-09 | |
15.0 | 17.0 | 23.0 | 12.0 | 1.0 | MFM-1517-12 | |
15.0 | 17.0 | 23.0 | 17.0 | 1.0 | MFM-1517-17 | |
15.0 | 21.0 | 27.0 | 10.0 | 3.0 | MFM-1521-10 | |
15.0 | 21.0 | 27.0 | 15.0 | 3.0 | MFM-1521-15 | |
15.0 | 21.0 | 27.0 | 20.0 | 3.0 | MFM-1521-20 | |
15.0 | 21.0 | 27.0 | 25.0 | 3.0 | MFM-1521-25 | |
16.0 | 18.0 | 28.0 | 8.0 | 2.0 | MFM-1618-08/02 | |
16.0 | 18.0 | 24.0 | 12.0 | 1.0 | MFM-1618-12 | |
16.0 | 18.0 | 24.0 | 17.0 | 1.0 | MFM-1618-17 | |
16.0 | 22.0 | 28.0 | 12.0 | 3.0 | MFM-1622-12 | |
16.0 | 22.0 | 28.0 | 15.0 | 3.0 | MFM-1622-15 | |
16.0 | 22.0 | 28.0 | 20.0 | 3.0 | MFM-1622-20 | |
16.0 | 22.0 | 28.0 | 25.0 | 3.0 | MFM-1622-25 | |
18.0 | 20.0 | 26.0 | 12.0 | 1.0 | MFM-1820-12 | |
18.0 | 20.0 | 26.0 | 17.0 | 1.0 | MFM-1820-17 | |
18.0 | 20.0 | 26.0 | 22.0 | 1.0 | MFM-1820-22 | |
18.0 | 24.0 | 30.0 | 8.0 | 3.0 | MFM-1824-08 | |
18.0 | 24.0 | 30.0 | 12.0 | 3.0 | MFM-1824-12 | |
18.0 | 24.0 | 30.0 | 18.0 | 3.0 | MFM-1824-18 | |
18.0 | 24.0 | 30.0 | 20.0 | 3.0 | MFM-1824-20 | |
18.0 | 24.0 | 30.0 | 30.0 | 3.0 | MFM-1824-30 | |
18.0 | 24.0 | 26.0 | 7.8 | 3.0 | MFM-182426-078 | |
19.0 | +0.065 +0.195 | 24.0 | 27.0 | 12.0 | 2.0 | MFM-192427-12 |
20.0 | 23.0 | 30.0 | 11.5 | 1.5 | MFM-2023-11 | |
20.0 | 23.0 | 30.0 | 16.5 | 1.5 | MFM-2023-16 | |
20.0 | 23.0 | 30.0 | 21.5 | 1.5 | MFM-2023-21 | |
20.0 | 26.0 | 32.0 | 15.0 | 3.0 | MFM-2026-15 | |
20.0 | 26.0 | 32.0 | 20.0 | 3.0 | MFM-2026-20 | |
20.0 | 26.0 | 28.0 | 12.0 | 3.0 | MFM-202628-12 | |
20.0 | 26.0 | 32.0 | 30.0 | 3.0 | MFM-2026-30 | |
22.0 | 28.0 | 34.0 | 15.0 | 3.0 | MFM-2228-15 | |
22.0 | 28.0 | 34.0 | 20.0 | 3.0 | MFM-2228-20 | |
22.0 | 28.0 | 34.0 | 30.0 | 3.0 | MFM-2228-30 | |
24.0 | 30.0 | 36.0 | 15.0 | 3.0 | MFM-2430-15 | |
24.0 | 30.0 | 36.0 | 20.0 | 3.0 | MFM-2430-20 | |
24.0 | 30.0 | 36.0 | 30.0 | 3.0 | MFM-2430-30 | |
25.0 | 28.0 | 35.0 | 11.5 | 1.5 | MFM-2528-11 | |
25.0 | 28.0 | 35.0 | 16.5 | 1.5 | MFM-2528-16 | |
25.0 | 28.0 | 35.0 | 21.5 | 1.5 | MFM-2528-21 | |
25.0 | 32.0 | 38.0 | 12.0 | 4.0 | MFM-2532-12 | |
25.0 | 32.0 | 38.0 | 15.0 | 4.0 | MFM-2532-15 | |
25.0 | 32.0 | 38.0 | 20.0 | 4.0 | MFM-2532-20 | |
25.0 | 32.0 | 38.0 | 30.0 | 4.0 | MFM-2532-30 | |
25.0 | 32.0 | 38.0 | 40.0 | 4.0 | MFM-2532-40 | |
27.0 | 34.0 | 40.0 | 20.0 | 4.0 | MFM-2734-20 | |
27.0 | 34.0 | 40.0 | 30.0 | 4.0 | MFM-2734-30 | |
27.0 | 34.0 | 40.0 | 40.0 | 4.0 | MFM-2734-40 | |
28.0 | 36.0 | 42.0 | 20.0 | 4.0 | MFM-2836-20 | |
28.0 | 36.0 | 42.0 | 30.0 | 4.0 | MFM-2836-30 | |
28.0 | 36.0 | 42.0 | 40.0 | 4.0 | MFM-2836-40 | |
30.0 | 34.0 | 42.0 | 16.0 | 2.0 | MFM-3034-16 | |
30.0 | 34.0 | 42.0 | 26.0 | 2.0 | MFM-3034-26 | |
30.0 | 35.0 | 44.0 | 20.0 | 4.0 | MFM-3035-20 | |
30.0 | 38.0 | 44.0 | 20.0 | 4.0 | MFM-3038-20 | |
30.0 | 38.0 | 44.0 | 30.0 | 4.0 | MFM-3038-30 | |
30.0 | 38.0 | 44.0 | 40.0 | 4.0 | MFM-3038-40 | |
32.0 | +0.080 +0.240 | 40.0 | 46.0 | 20.0 | 4.0 | MFM-3240-20 |
32.0 | 40.0 | 46.0 | 30.0 | 4.0 | MFM-3240-30 | |
32.0 | 40.0 | 46.0 | 40.0 | 4.0 | MFM-3240-40 | |
35.0 | 39.0 | 47.0 | 16.0 | 2.0 | MFM-3539-16 | |
35.0 | 39.0 | 47.0 | 26.0 | 2.0 | MFM-3539-26 | |
40.0 | 44.0 | 52.0 | 30.0 | 2.0 | MFM-4044-30 | |
40.0 | 44.0 | 52.0 | 40.0 | 2.0 | MFM-4044-40 | |
45.0 | 50.0 | 58.0 | 50.0 | 2.0 | MFM-4550-50 |
Codice componente
|
---|
MFM-1618-12 |
Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | RoHS | Diametro interno d1 (Ø) | D.E. d2 (Ø) | Lunghezza complessiva b1 (mm) | Spessore T (mm) | |
---|---|---|---|---|---|---|---|---|---|
4.02 € | 1 | Disponibile | 2 giorni | - | - | - | - | - |
Loading...
Gruppo resina | Gruppo di polimeri a prestazioni elevate | Ambiente | Standard / Resistenza a materiali estranei / Resistenza alle vibrazioni / In acqua / In acqua di mare / In sost. chimiche | Max. valore PV ammesso(N/mm²·m/s) | 0.12 |
---|---|---|---|---|---|
Max. Pressione di superficie ammessa P(N/mm2) | 20 | Max. Velocità ammessa V(m/s) | 5 | Tolleranza foro di alloggio raccomandata | h7 |
Condizione di lubrificazione | Senza lubrificazione |
Si trova sulla pagina di Boccole a strisciamento / con collare / plastica (iglidur) / M250 / MFM, il codice articolo è il seguente: MFM-1618-12.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto MFM-1618-12.
Configura
Proprietà di base
Diametro interno d1(Ø)
D.E. d2(Ø)
Lunghezza complessiva b1(mm)
Spessore T(mm)
Tipo
Filtrare per tipo dati CAD
Filtrare per giorni di spedizione standard
Attributi opzionali
Codice componente |
---|
MFM-0206-03 |
MFM-0306-04 |
MFM-0408-04 |
MFM-1622-12 |
MFM-1622-15 |
MFM-1622-20 |
Codice componente | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | RoHS | Diametro interno d1 (Ø) | D.E. d2 (Ø) | Lunghezza complessiva b1 (mm) | Spessore T (mm) |
---|---|---|---|---|---|---|---|---|---|
3.76 € | 1 | Disponibile | 2 giorni | - | - | - | - | - | |
3.78 € | 1 | Disponibile | 2 giorni | - | - | - | - | - | |
3.80 € | 1 | Disponibile | 3 giorni | - | - | - | - | - | |
4.04 € | 1 | Disponibile | 2 giorni | - | - | - | - | - | |
4.06 € | 1 | Disponibile |
Stesso giorno
Stock | - | - | - | - | - | |
4.10 € | 1 | Disponibile | 2 giorni | - | - | - | - | - |