Valvola a sfera con flangia, classe 10K
Stainless steel valve U Series. For general purpose and construction equipment.
[Features]
· General piping stainless steel pipe (JIS G3448) and water supply stainless steel pipe (JWWA G115)—used for stainless steel piping in construction facilities—have the following features.
· Three times the tensile strength of copper pipe, and two times the tensile strength of steel pipe.
· The lightweight body material has a thickness of approx. 1/3 to 1/2 the thickness of steel pipe with superior mechanical strength and corrosion resistance.
· No reduction in the flow area due to tuberculation due to smooth inner surface. This valve has excellent cavitation resistance resulting in improved flow rates
· The thermal expansion coefficient is similar to copper pipe and about 1.5 times that of steel pipe. Thermal conductivity must be taken into consideration due to poor expansion and contraction at 1/24 that of copper pipe and 1/4 that of steel pipe. Therefore, care is required during welding and brazing.
· Heat loss is slightly less than steel pipe.
· Screw coupling is not possible due to the thin wall connection area.
· Mechanical type fittings or butt welding is used for small diameter pipes.
· Flange connection, weld joining, or housing type joints are used for pipes with medium or larger sized diameters.
[Features]
· General piping stainless steel pipe (JIS G3448) and water supply stainless steel pipe (JWWA G115)—used for stainless steel piping in construction facilities—have the following features.
· Three times the tensile strength of copper pipe, and two times the tensile strength of steel pipe.
· The lightweight body material has a thickness of approx. 1/3 to 1/2 the thickness of steel pipe with superior mechanical strength and corrosion resistance.
· No reduction in the flow area due to tuberculation due to smooth inner surface. This valve has excellent cavitation resistance resulting in improved flow rates
· The thermal expansion coefficient is similar to copper pipe and about 1.5 times that of steel pipe. Thermal conductivity must be taken into consideration due to poor expansion and contraction at 1/24 that of copper pipe and 1/4 that of steel pipe. Therefore, care is required during welding and brazing.
· Heat loss is slightly less than steel pipe.
· Screw coupling is not possible due to the thin wall connection area.
· Mechanical type fittings or butt welding is used for small diameter pipes.
· Flange connection, weld joining, or housing type joints are used for pipes with medium or larger sized diameters.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
UGF-N-25A
Codice componente
|
|---|
| UGF-N-25A |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Lato mandata, designazione nominale flangia del tubo Tipo B (Tipo A) | Lato controllo, valore nominale flangia del tubo Tipo B (Tipo A) | L (mm) | H (mm) | D1 (Ø) | |
|---|---|---|---|---|---|---|---|---|---|
271.50 € | 1 | 9 giorni | 1B(25A) | 1B(25A) | 110 | 143 | 100 |
Loading...
Informazioni di base
| Profilo corpo principale | Dritto | Materiale corpo | EN 1.4308 Equiv. | Liquido applicabile | Acqua / Aria / Olio / Gas / Vapore saturo |
|---|---|---|---|---|---|
| Pressione nominale | 10K | Lato mandata, tipo di collegamento | Flangia tubo | Lato di controllo, tipo di attacco | Flangia tubo |
| Profilo leva | Maniglia con profilo arrotondato | Con valvole di sezionamento | Standard | Gamma di temperature di esercizio(°C) | ::180 |
| Metodo di funzionamento | Con funzionamento elettrico | Dettagli massima pressione ammessa (Vapore, aria, gas, olio e flusso pulsante a 180°C o inf.)(MPa) | 1.0 |
Configura
Proprietà di base
-
Lato mandata, designazione nominale flangia del tubo Tipo B (Tipo A)
-
Tipo
- UGF-N
-
Lato controllo, valore nominale flangia del tubo Tipo B (Tipo A)
-
Filtrare per tipo dati CAD
- 2D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 9 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.