STB boccola 11080
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· The bushing is used as a part for tightening a shaft with any type of rotating body such as a pulley, gear, sprocket wheel, and coupling, and can be used to very easily attach or separate these types of rotating bodies and the shaft which leads to greatly reduced costs associated with processing, assembly, maintenance, and inspection to provide comprehensive cost benefits.
· Shaft hole key grooves have been machined into the bushing to provide benefits such as consistent accuracy and shortened delivery time.
· The STB bushing system covers all of these benefits and greatly contributes to saving labor and reducing total costs.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Can be used without a key with light loads. Does not require a cover or set screw.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type used in the US and Europe.·
[Features]
· The bushing is used as a part for tightening a shaft with any type of rotating body such as a pulley, gear, sprocket wheel, and coupling, and can be used to very easily attach or separate these types of rotating bodies and the shaft which leads to greatly reduced costs associated with processing, assembly, maintenance, and inspection to provide comprehensive cost benefits.
· Shaft hole key grooves have been machined into the bushing to provide benefits such as consistent accuracy and shortened delivery time.
· The STB bushing system covers all of these benefits and greatly contributes to saving labor and reducing total costs.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Can be used without a key with light loads. Does not require a cover or set screw.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type used in the US and Europe.·
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
STB11080X75-N
- Dati prodotto
- Dati CAD non disponibili
Informazioni di base
| Materiale corpo principale | EN-JL 1030 Equiv. | Tipo | Componenti correlati | Applicazione | Standard |
|---|---|---|---|---|---|
| Numero di fori bullone n | 2 | Misura bullone | Vite di fermo a esagono incassato (punte viti speciali) M16X32 | Nominale | 11080 |
| Diametro esterno(mm) | 110 | Diametro massimo foro albero d(mm) | 75 | Diametro foro albero standard | 75 |
| Con boccole | X | Con chiavetta | Chiavetta nuovo JIS |
Si trova sulla pagina di STB boccola 11080, il codice articolo è il seguente: STB11080X75-N.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto STB11080X75-N.
Configura
Proprietà di base
-
Tipo
- STB11080
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 9 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.