Supporti basculanti (22730.0118)
- In Offerta
Dettagli del prodotto:
Codice articolo del costruttore: 22730.0118
Marca: HALDER
Prezzo: 43.20 €
Tempi di consegna: 2 giorni
Dati Tecnici:
Material (ball): Stainless steel 1.3541, nickel-plated mm
Dimension d1: 20
Dimension d2: M8
Dimension d3: 10.5 mm
Dimensione l1: 18 mm
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
22730.0118
Self-Aligning Pads, EH 22730.
Product Description
 | Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements. |
Material
• Ball-bearing steel, hardened, bright
• Stainless steel 1.3541, nickel-plated
Body
• Heat-treated steel, tempered, phosphated
• Stainless steel 1.4057, heat-treated
Notes
Loading capacity valid for steel and stainless steel designs.
Drawing
Order Information
| Dimensions | Location hole | WS | Load capacity for static load max. | Tightening torque max. | Weight | Art. No. | |||||||
| d1 | d2 | d3 | l1 | l2 | l3 | ball diameter | Ø | Depth | |||||
| -0.5 | max. | H7 | min. | ||||||||||
| [mm] | [mm] | [mm] | [kN] | [Nm] | [g] | ||||||||
| with male thread, flat-faced ball, bearing surface plain – picture 1, heat-treated steel | |||||||||||||
| 13 | M 6 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 10.0 | 12.0 | 22730.0012 |
| 13 | M 8 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 25.0 | 13.0 | 22730.0013 |
| 20 | M 8 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 25.0 | 39.0 | 22730.0018 |
| 20 | M10 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 46.0 | 40.0 | 22730.0019 |
| 20 | M12 | 10.5 | 18 | 12 | – | 16 | – | – | 17 | 25 | 82.0 | 43.0 | 22730.0020 |
| 30 | M16 | 20.0 | 27 | 16 | – | 25 | – | – | 27 | 90 | 206.0 | 151.0 | 22730.0030 |
| 50 | M20 | 34.5 | 35 | 20 | – | 40 | – | – | 41 | 165 | 407.0 | 489.0 | 22730.0050 |
| 50 | M24 | 34.5 | 35 | 24 | – | 40 | – | – | 41 | 165 | 698.0 | 518.0 | 22730.0060 |
| with male thread, flat-faced ball, bearing surface plain – picture 1, stainless steel | |||||||||||||
| 13 | M 6 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 10.0 | 12.0 | 22730.0112 |
| 13 | M 8 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 25.0 | 13.0 | 22730.0113 |
| 20 | M 8 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 25.0 | 38.0 | 22730.0118 |
| 20 | M10 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 46.0 | 40.0 | 22730.0119 |
| 20 | M12 | 10.5 | 18 | 12 | – | 16 | – | – | 17 | 25 | 82.0 | 44.0 | 22730.0120 |
| 30 | M16 | 20.0 | 27 | 16 | – | 25 | – | – | 27 | 90 | 206.0 | 150.0 | 22730.0130 |
| 50 | M20 | 34.5 | 35 | 20 | – | 40 | – | – | 41 | 165 | 407.0 | 482.0 | 22730.0150 |
| 50 | M24 | 34.5 | 35 | 24 | – | 40 | – | – | 41 | 165 | 698.0 | 512.0 | 22730.0160 |
| with male thread, flat-faced ball, bearing surface ribbed – picture 2, heat-treated steel | |||||||||||||
| 13 | M 6 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 10.0 | 12.0 | 22730.0312 |
| 13 | M 8 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 25.0 | 13.0 | 22730.0313 |
| 20 | M 8 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 25.0 | 38.0 | 22730.0318 |
| 20 | M10 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 46.0 | 40.0 | 22730.0319 |
| 20 | M12 | 10.5 | 18 | 12 | – | 16 | – | – | 17 | 25 | 82.0 | 43.0 | 22730.0320 |
| 30 | M16 | 20.0 | 27 | 16 | – | 25 | – | – | 27 | 90 | 206.0 | 149.0 | 22730.0330 |
| 50 | M20 | 34.5 | 35 | 20 | – | 40 | – | – | 41 | 165 | 407.0 | 484.0 | 22730.0350 |
| 50 | M24 | 34.5 | 35 | 24 | – | 40 | – | – | 41 | 165 | 698.0 | 513.0 | 22730.0360 |
| for locating hole, flat-faced ball, bearing surface plain – picture 3, heat-treated steel | |||||||||||||
| 12 n6 | M 3 | 7.2 | 11 | – | 3.2 | 10 | 12 | 6 | – | 101) | 1.3 | 8.0 | 22730.0412 |
| 18 n6 | M 4 | 10.5 | 17 | – | 4.0 | 16 | 18 | 8 | – | 251) | 2.9 | 29.0 | 22730.0418 |
| 28 n6 | M 5 | 20.0 | 25 | – | 5.5 | 25 | 28 | 13 | – | 901) | 6.0 | 109.0 | 22730.0428 |
| for locating hole, flat-faced ball, bearing surface plain – picture 3, stainless steel | |||||||||||||
| 12 n6 | M 3 | 7.2 | 11 | – | 3.2 | 10 | 12 | 6 | – | 101) | 1.3 | 7.9 | 22730.0452 |
| 18 n6 | M 4 | 10.5 | 17 | – | 4.0 | 16 | 18 | 8 | – | 251) | 2.9 | 29.0 | 22730.0458 |
| 28 n6 | M 5 | 20.0 | 25 | – | 5.5 | 25 | 28 | 13 | – | 901) | 6.0 | 108.0 | 22730.0468 |
| for locating hole, flat-faced ball, bearing surface ribbed – picture 4, heat-treated steel | |||||||||||||
| 12 n6 | M 3 | 7.2 | 11 | – | 3.2 | 10 | 12 | 6 | – | 101) | 1.3 | 7.9 | 22730.0712 |
| 18 n6 | M 4 | 10.5 | 17 | – | 4.0 | 16 | 18 | 8 | – | 251) | 2.9 | 29.0 | 22730.0718 |
| 28 n6 | M 5 | 20.0 | 25 | – | 5.5 | 25 | 28 | 13 | – | 901) | 6.0 | 108.0 | 22730.0728 |
Application Example
Self-Aligning Pads • with hard metal ball, ribbed, EH 22730.
Product Description
 | Especially designed for cast parts (hard casting crust). To be used as support, thrust pad and for build into clamping elements. |
Material
• Hard metal, ribbed, nickel-plated
Body
• Heat-treated steel, tempered, phosphated
• Stainless steel 1.4057, heat-treated
Notes
Loading capacity valid for steel and stainless steel designs.
Drawing
Order Information
| Dimensions | WS | Load capacity for static load max. | Tightening torque max. | Weight | Art. No. | |||||
| d1 | d2 | d3 | l1 | l2 | ball diameter | |||||
| ±0.2 | -0.5 | |||||||||
| [mm] | [mm] | [kN] | [Nm] | [g] | ||||||
| with male thread, flat-faced ball, bearing surface ribbed, heat-treated steel | ||||||||||
| 13 | M 6 | 8.3 | 13 | 8 | 10 | 11 | 10 | 10 | 14 | 22730.0362 |
| 13 | M 8 | 8.3 | 13 | 8 | 10 | 11 | 10 | 25 | 15 | 22730.0363 |
| 20 | M 8 | 13.2 | 18 | 10 | 16 | 17 | 25 | 25 | 49 | 22730.0378 |
| 20 | M10 | 13.2 | 18 | 10 | 16 | 17 | 25 | 46 | 50 | 22730.0379 |
| 20 | M12 | 13.2 | 18 | 12 | 16 | 17 | 25 | 82 | 54 | 22730.0380 |
| 30 | M16 | 20.0 | 27 | 16 | 25 | 27 | 90 | 206 | 186 | 22730.0381 |
| 50 | M20 | 34.5 | 35 | 20 | 40 | 41 | 165 | 407 | 633 | 22730.0382 |
| 50 | M24 | 34.5 | 35 | 24 | 40 | 41 | 165 | 698 | 664 | 22730.0383 |
| with male thread, flat-faced ball, bearing surface ribbed, stainless steel | ||||||||||
| 13 | M 6 | 8.3 | 13 | 8 | 10 | 11 | 10 | 10 | 14 | 22730.0390 |
| 13 | M 8 | 8.3 | 13 | 8 | 10 | 11 | 10 | 25 | 15 | 22730.0392 |
| 20 | M 8 | 13.2 | 18 | 10 | 16 | 17 | 25 | 25 | 48 | 22730.0394 |
| 20 | M10 | 13.2 | 18 | 10 | 16 | 17 | 25 | 46 | 50 | 22730.0396 |
| 20 | M12 | 13.2 | 18 | 12 | 16 | 17 | 25 | 82 | 54 | 22730.0398 |
| 30 | M16 | 20.0 | 27 | 16 | 25 | 27 | 90 | 206 | 186 | 22730.0399 |
| 50 | M20 | 34.5 | 35 | 20 | 40 | 41 | 165 | 407 | 632 | 22730.0400 |
| 50 | M24 | 34.5 | 35 | 24 | 40 | 41 | 165 | 698 | 660 | 22730.0401 |
Application Example
Self-Aligning Pads • self-resetting, EH 22731.
Product Description
 | Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements. By resetting to the parallel position the contact point of the self-aligning pad provides a defined initial position, thus preventing the pad clamping in an oblique position when inserting the workpiece. |
Material
• Thermoplastic PUR
Ball
• Ball-bearing steel, hardened, bright
• Stainless steel 1.3541, nickel-plated
Body
• Heat-treated steel, tempered, phosphated
• Stainless steel 1.4057, heat-treated
Notes
Loading capacity valid for steel and stainless steel designs.
Drawing
Order Information
| Dimensions | Location hole | WS | Load capacity for static load max. | Tightening torque max. | Weight | Art. No. | |||||||
| d1 | d2 | d3 | l1 | l2 | l3 | ball diameter | Ø | Depth | |||||
| -0.5 | max. | H7 | min. | ||||||||||
| [mm] | [mm] | [mm] | [kN] | [Nm] | [g] | ||||||||
| with male thread, flat-faced ball, bearing surface plain – picture 1, heat-treated steel | |||||||||||||
| 13 | M 6 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 10.0 | 12 | 22731.0012 |
| 13 | M 8 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 25.0 | 13 | 22731.0013 |
| 20 | M 8 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 25.0 | 38 | 22731.0018 |
| 20 | M10 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 46.0 | 40 | 22731.0019 |
| 20 | M12 | 10.5 | 18 | 12 | – | 16 | – | – | 17 | 25 | 82.0 | 43 | 22731.0020 |
| 30 | M16 | 20.0 | 27 | 16 | – | 25 | – | – | 27 | 90 | 206.0 | 149 | 22731.0030 |
| 50 | M20 | 34.5 | 35 | 20 | – | 40 | – | – | 41 | 165 | 407.0 | 486 | 22731.0050 |
| 50 | M24 | 34.5 | 35 | 24 | – | 40 | – | – | 41 | 165 | 698.0 | 516 | 22731.0060 |
| with male thread, flat-faced ball, bearing surface plain – picture 1, stainless steel | |||||||||||||
| 13 | M 6 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 10.0 | 12 | 22731.0112 |
| 13 | M 8 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 25.0 | 13 | 22731.0113 |
| 20 | M 8 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 25.0 | 38 | 22731.0118 |
| 20 | M10 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 46.0 | 39 | 22731.0119 |
| 20 | M12 | 10.5 | 18 | 12 | – | 16 | – | – | 17 | 25 | 82.0 | 43 | 22731.0120 |
| 30 | M16 | 20.0 | 27 | 16 | – | 25 | – | – | 27 | 90 | 206.0 | 148 | 22731.0130 |
| 50 | M20 | 34.5 | 35 | 20 | – | 40 | – | – | 41 | 165 | 407.0 | 482 | 22731.0150 |
| 50 | M24 | 34.5 | 35 | 24 | – | 40 | – | – | 41 | 165 | 698.0 | 511 | 22731.0160 |
| with male thread, flat-faced ball, bearing surface ribbed – picture 2, heat-treated steel | |||||||||||||
| 13 | M 6 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 10.0 | 12 | 22731.0312 |
| 13 | M 8 | 7.2 | 13 | 8 | – | 10 | – | – | 11 | 10 | 25.0 | 13 | 22731.0313 |
| 20 | M 8 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 25.0 | 37 | 22731.0318 |
| 20 | M10 | 10.5 | 18 | 10 | – | 16 | – | – | 17 | 25 | 46.0 | 40 | 22731.0319 |
| 20 | M12 | 10.5 | 18 | 12 | – | 16 | – | – | 17 | 25 | 82.0 | 43 | 22731.0320 |
| 30 | M16 | 20.0 | 27 | 16 | – | 25 | – | – | 27 | 90 | 206.0 | 149 | 22731.0330 |
| 50 | M20 | 34.5 | 35 | 20 | – | 40 | – | – | 41 | 165 | 407.0 | 482 | 22731.0350 |
| 50 | M24 | 34.5 | 35 | 24 | – | 40 | – | – | 41 | 165 | 698.0 | 511 | 22731.0360 |
| for locating hole, flat-faced ball, bearing surface plain – picture 3, heat-treated steel | |||||||||||||
| 12 n6 | M 3 | 7.2 | 17 | – | 3.2 | 10 | 12 | 12 | – | 101) | 1.3 | 13 | 22731.0412 |
| 18 n6 | M 4 | 10.5 | 23 | – | 4.0 | 16 | 18 | 14 | – | 251) | 2.9 | 40 | 22731.0418 |
| 28 n6 | M 5 | 20.0 | 34 | – | 6.0 | 25 | 28 | 22 | – | 901) | 6.0 | 151 | 22731.0428 |
| for locating hole, flat-faced ball, bearing surface plain – picture 3, stainless steel | |||||||||||||
| 12 n6 | M 3 | 7.2 | 17 | – | 3.2 | 10 | 12 | 12 | – | 101) | 1.3 | 13 | 22731.0452 |
| 18 n6 | M 4 | 10.5 | 23 | – | 4.0 | 16 | 18 | 14 | – | 251) | 2.9 | 40 | 22731.0458 |
| 28 n6 | M 5 | 20.0 | 34 | – | 6.0 | 25 | 28 | 22 | – | 901) | 6.0 | 150 | 22731.0468 |
| for locating hole, flat-faced ball, bearing surface ribbed – picture 4, heat-treated steel | |||||||||||||
| 12 n6 | M 3 | 7.2 | 17 | – | 3.2 | 10 | 12 | 12 | – | 101) | 1.3 | 13 | 22731.0712 |
| 18 n6 | M 4 | 10.5 | 23 | – | 4.0 | 16 | 18 | 14 | – | 251) | 2.9 | 40 | 22731.0718 |
| 28 n6 | M 5 | 20.0 | 34 | – | 6.0 | 25 | 28 | 22 | – | 901) | 6.0 | 150 | 22731.0728 |
Application Example
Self-Aligning Pads • with hard metal ball, ribbed and self-resetting, EH 22731.
Product Description
 | Especially designed for cast parts (hard casting crust). To be used as support, thrust pad and for build into clamping elements. By resetting to the parallel position the contact point of the self-aligning pad provides a defined initial position, thus preventing the pad clamping in an oblique position when inserting the workpiece. |
Material
• Thermoplastic PUR
Ball
• Hard metal, ribbed, nickel-plated
Body
• Heat-treated steel, tempered, phosphated
• Stainless steel 1.4057, heat-treated
Drawing
Order Information
| Dimensions | WS | Load capacity for static load max. | Tightening torque max. | Weight | Art. No. | |||||
| d1 | d2 | d3 | l1 | l2 | ball diameter | |||||
| ±0.2 | -0.5 | |||||||||
| [mm] | [mm] | [kN] | [Nm] | [g] | ||||||
| with male thread, flat-faced ball, bearing surface ribbed, heat-treated steel | ||||||||||
| 13 | M 6 | 8.3 | 13 | 8 | 10 | 11 | 10 | 10 | 14 | 22731.0362 |
| 13 | M 8 | 8.3 | 13 | 8 | 10 | 11 | 10 | 25 | 15 | 22731.0363 |
| 20 | M 8 | 13.2 | 18 | 10 | 16 | 17 | 25 | 25 | 48 | 22731.0378 |
| 20 | M10 | 13.2 | 18 | 10 | 16 | 17 | 25 | 46 | 50 | 22731.0379 |
| 20 | M12 | 13.2 | 18 | 12 | 16 | 17 | 25 | 82 | 53 | 22731.0380 |
| 30 | M16 | 20.0 | 27 | 16 | 25 | 27 | 90 | 206 | 186 | 22731.0381 |
| 50 | M20 | 34.5 | 35 | 20 | 40 | 41 | 165 | 407 | 639 | 22731.0382 |
| 50 | M24 | 34.5 | 35 | 24 | 40 | 41 | 165 | 698 | 673 | 22731.0383 |
| with male thread, flat-faced ball, bearing surface ribbed, stainless steel | ||||||||||
| 13 | M 6 | 8.3 | 13 | 8 | 10 | 11 | 10 | 10 | 14 | 22731.0390 |
| 13 | M 8 | 8.3 | 13 | 8 | 10 | 11 | 10 | 25 | 16 | 22731.0392 |
| 20 | M 8 | 13.2 | 18 | 10 | 16 | 17 | 25 | 25 | 48 | 22731.0394 |
| 20 | M10 | 13.2 | 18 | 10 | 16 | 17 | 25 | 46 | 49 | 22731.0396 |
| 20 | M12 | 13.2 | 18 | 12 | 16 | 17 | 25 | 82 | 53 | 22731.0398 |
| 30 | M16 | 20.0 | 27 | 16 | 25 | 27 | 90 | 206 | 190 | 22731.0399 |
| 50 | M20 | 34.5 | 35 | 20 | 40 | 41 | 165 | 407 | 639 | 22731.0400 |
| 50 | M24 | 34.5 | 35 | 24 | 40 | 41 | 165 | 698 | 673 | 22731.0401 |
Application Example
Codice componente
|
|---|
| 22730.0118 |
| Codice componente | Relativo a |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | RoHS | Material (ball) (mm) | Dimension d1 | Dimension d2 | Dimension d3 (mm) | Dimensione l1 (mm) | Dimensione l2 (mm) | Dimension l3 (mm) | WS (mm) | Depth (mm) | Location hole (mm) | Load capacity for static load max. (kN) | Body | Tightening torque max. (Nm) | Surface | System | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
43.20 € | 2 | 2 giorni | 10 | Stainless steel 1.3541, nickel-plated | 20 | M8 | 10.5 | 18 | 10 | - | 17 | - | - | 25 | Stainless steel 1.4057, heat-treated | 25 | plain | - |
Loading...
Informazioni di base
| Conflict Minerals free | yes | REACH compliant | yes |
|---|
Si trova sulla pagina di Supporti basculanti, il codice articolo è il seguente: 22730.0118.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto 22730.0118.
Configura
Proprietà di base
-
Dimension l3(mm)
-
Depth(mm)
- 6
- 8
- 13
-
Location hole(mm)
- 12
- 18
- 28
-
System
- V40
- V70
-
Tipo
- 22730
-
Material (ball)(mm)
- Stainless steel 1.3541, nickel-plated
- Ball-bearing steel, hardened, bright
-
Dimension d1
-
Dimension d2
-
Dimension d3(mm)
-
Dimensione l1(mm)
-
Dimensione l2(mm)
-
WS(mm)
-
Load capacity for static load max.(kN)
-
Body
- Stainless steel 1.4057, heat-treated
- Heat-treated steel, tempered, phosphated
-
Tightening torque max.(Nm)
-
Surface
- plain
- ribbed
-
Filtrare per tipo dati CAD
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- Stesso giorno
- 2 giorni o meno
- 3 giorni o meno
- 4 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| 22730.0019 |
| 22730.0020 |
| 22730.0030 |
| 22730.0119 |
| 22730.0120 |
| 22730.0130 |
| Codice componente | Relativo a | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | RoHS | Material (ball) (mm) | Dimension d1 | Dimension d2 | Dimension d3 (mm) | Dimensione l1 (mm) | Dimensione l2 (mm) | Dimension l3 (mm) | WS (mm) | Depth (mm) | Location hole (mm) | Load capacity for static load max. (kN) | Body | Tightening torque max. (Nm) | Surface | System |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
34.50 € | 1 |
Stesso giorno
Stock | 10 | Ball-bearing steel, hardened, bright | 20 | M10 | 10.5 | 18 | 10 | - | 17 | - | - | 25 | Heat-treated steel, tempered, phosphated | 46 | plain | - | |||
34.50 € | 1 |
Stesso giorno
Stock | 10 | Ball-bearing steel, hardened, bright | 20 | M12 | 10.5 | 18 | 12 | - | 17 | - | - | 25 | Heat-treated steel, tempered, phosphated | 82 | plain | V70 | |||
43.10 € | 1 | 2 giorni | 10 | Ball-bearing steel, hardened, bright | 30 | M16 | 20 | 27 | 16 | - | 27 | - | - | 90 | Heat-treated steel, tempered, phosphated | 206 | plain | V70 | |||
43.20 € | 1 | 2 giorni | 10 | Stainless steel 1.3541, nickel-plated | 20 | M10 | 10.5 | 18 | 10 | - | 17 | - | - | 25 | Stainless steel 1.4057, heat-treated | 46 | plain | - | |||
43.20 € | 2 | 4 giorni | 10 | Stainless steel 1.3541, nickel-plated | 20 | M12 | 10.5 | 18 | 12 | - | 17 | - | - | 25 | Stainless steel 1.4057, heat-treated | 82 | plain | - | |||
54.34 € | 1 | 4 giorni | 10 | Stainless steel 1.3541, nickel-plated | 30 | M16 | 20 | 27 | 16 | - | 27 | - | - | 90 | Stainless steel 1.4057, heat-treated | 206 | plain | - |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.