Rondelle sferiche / Rosette coniche, DIN 6319 (23050.0036)

Rondelle sferiche / Rosette coniche, DIN 6319 23050.0036

Dettagli del prodotto:

Codice articolo del costruttore: 23050.0036

Marca: HALDER

Prezzo: 10.56

Tempi di consegna: Stesso giorno


Dati Tecnici:

Tipo: Rondelle sferiche

D.I. d: 37 mm

Spessore T: 14 mm

D.E. D: 68 mm

d4: - mm


Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

23050.0036

Spherical Washers / Conical Seats • DIN 6319, EH 23050.

Product Description

Spherical washers / Conical seats are used as washers in a screw connection to compensate non-parallel surfaces.

Material

Conical seat
• Case-hardened steel, case-hardened, manganese phosphated
• Heat-treated steel, tempered, manganese phosphated
Spherical washer
• Case-hardened steel, case-hardened, manganese phosphated

Assembly

Conical seats form D are to be used only for plain, closed round areas.
For larger holes only use form G!

Further products

• Spherical Washers / Conical Seats, similar to DIN 6319, stainless steel
• Fixture Nuts, DIN 6330 (height 1.5 d)

Drawing

picture 1 picture 2 picture 3

Order Information

DimensionsFor pinFor screwsLoad
capacity
for static
load

max.
Torque for
screwed
connections

max.
WeightArt. No.
d1d2d3d4d5h1h2h3h4r1d6d6  
H13H13      with
conical
seat
form D

~
with
conical
seat
form G

~
     
[mm][mm][mm][kN][Nm][g] 
spherical washers from case-hardened steel, form C – picture 1
6.4120.72.34.25.49.06M 69101)1.023050.0006
8.4170.63.25.67.112.08M 817251)2.823050.0008
10.5210.84.06.57.315.010M1026461)0.823050.0010
13.0241.14.68.09.017.012M1238821)8.023050.0012
15.0281.45.08.59.522.014M14531301)12.023050.0014
17.0301.35.39.610.422.016M16732061)13.023050.0016
21.0362.06.311.712.227.020M201174071)23.023050.0020
23.0402.57.613.529.522M221465421)35.023050.00222)
25.0442.48.215.215.732.024M241686981)43.023050.0024
28.0503.310.217.036.027M2722110211)74.023050.00272)
31.0563.611.219.219.741.030M3026913551)103.023050.0030
34.0624.413.021.845.033M333263)19693) 1)150.023050.00332)
37.0684.614.023.550.036M3639423721)193.023050.0036
40.0755.616.026.854.039M394603)32763) 1)280.023050.00392)
43.0786.517.029.058.042M4254238021)310.023050.0042
50.0928.021.035.567.048M4871457301)549.023050.0048
54.0969.322.038.372.052M528323)78763) 1)610.023050.00522)
58.01039.823.039.379.056M569603)97933) 1)760.023050.00562)
62.011211.025.043.686.060M6011223)122193) 1)990.023050.00602)
66.012012.027.046.693.064M6412693)147623) 1)1220.023050.00642)
conical seats from case-hardened steel, form D – picture 2
7.11211.02.86M 69101)1.323050.0106
9.61714.53.58M 817251)3.723050.0108
12.02118.54.210M1026461)13.023050.0110
14.22420.05.012M1238821)10.023050.0112
16.52824.85.614M14531301)15.023050.0114
19.03026.06.216M16732061)18.023050.0116
23.23631.07.520M201174071)31.023050.0120
26.04034.08.522M221465421)44.023050.01222)
28.04437.09.524M241686981)61.023050.0124
31.55043.010.527M2722110211)87.023050.01272)
35.05649.012.030M3026913551)125.023050.0130
38.56255.014.033M333263)19693) 1)180.023050.01332)
42.06860.015.036M3639423721)230.023050.0136
45.07567.017.039M394603)32763) 1)330.023050.01392)
49.07870.018.042M4254238021)360.023050.0142
56.09282.022.048M4871457301)640.023050.0148
60.09685.024.052M528323)78763) 1)740.023050.01522)
65.010393.025.056M569603)97933) 1)900.023050.01562)
70.0112102.028.060M6011223)122193) 1)1160.023050.01602)
75.0120110.030.064M6412693)147623) 1)1430.023050.01642)
conical seats from heat-treated steel, form G – picture 3
7.11711.04.06M 69101)5.623050.0206
9.62414.55.08M 817251)14.023050.0208
12.03018.55.010M1026461)22.023050.0210
14.23620.06.012M1238821)39.023050.0212
16.54024.86.014M14531301)47.023050.0214
19.04426.07.016M16732061)65.023050.0216
23.25031.08.020M201174071)93.023050.0220
28.06037.010.024M241686981)165.023050.0224
35.06849.012.030M3026913551)235.023050.0230
1) Torques of screws with standard thread, eventual pre-loads to be considered, coefficient of friction μtotal 0.14.
2) DIN standards do not include these dimensions.
3) Figures theoretically determined

Application Example

Codice componente
23050.0036
Codice componenteRelativo a
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTipo D.I. d
(mm)
Spessore T
(mm)
D.E. D
(mm)
d4
(mm)
d5
(mm)
For pin d6
(mm)
h1
(mm)
h2
(mm)
h3
(mm)
h4
(mm)
r1
(mm)
Load capacity for static load max.
(kN)
Torque for screwed connections max.
(Nm)
Suitable for Conical seat Spherical washer

10.56 €

1 Stesso giorno

Stock

10Rondelle sferiche371468--364.614-~ 23.5503942372M36-Case-hardened steel, case-hardened, manganese phosphate

Loading...

  1. 1

Informazioni di base

Tipo (Applicazione) Rondelle piane Materiale Acciaio Norm DIN 6319
Conflict Minerals free yes REACH compliant yes

Si trova sulla pagina di Rondelle sferiche / Rosette coniche, DIN 6319, il codice articolo è il seguente: 23050.0036.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto 23050.0036.

Tipologia prodotto

Codice componente
23050.0012
23050.0014
23050.0016
23050.0039
23050.0042
23050.0048
Codice componenteRelativo a Prezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?
RoHSTipo D.I. d
(mm)
Spessore T
(mm)
D.E. D
(mm)
d4
(mm)
d5
(mm)
For pin d6
(mm)
h1
(mm)
h2
(mm)
h3
(mm)
h4
(mm)
r1
(mm)
Load capacity for static load max.
(kN)
Torque for screwed connections max.
(Nm)
Suitable for Conical seat Spherical washer

0.92 €

1 Stesso giorno

Stock

10Rondelle sferiche134.624--121.14.6-~ 8173882M12-Case-hardened steel, case-hardened, manganese phosphate

1.31 €

1 Stesso giorno

Stock

10Rondelle sferiche15528--141.45-~ 8.52253130M14-Case-hardened steel, case-hardened, manganese phosphate

1.25 €

1 Stesso giorno

Stock

10Rondelle sferiche175.330--161.35.3-~ 9.62273206M16-Case-hardened steel, case-hardened, manganese phosphate

20.18 €

1 2 giorni 10Rondelle sferiche401675--395.616-~ 26.8544603276M39-Case-hardened steel, case-hardened, manganese phosphate

15.43 €

1 4 giorni 10Rondelle sferiche431778--426.517-~ 29585423802M42-Case-hardened steel, case-hardened, manganese phosphate

23.10 €

1 Stesso giorno

Stock

10Rondelle sferiche502192--48821-~ 35.5677145730M48-Case-hardened steel, case-hardened, manganese phosphate

Supporto tecnico