• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

LQ1L, raccordo in resina fluoropolimerica gran purezza, collegamento filettato - Modello gomito

LQ1L, raccordo in resina fluoropolimerica gran purezza, collegamento filettato - Modello gomito
  • In Offerta

SMC

SMC

A fluoropolymer male elbow fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.

(i)Nota

  • Refer to the catalog for product specifications.
  • Product images may be representative images. Refer to the catalog for details.

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Male Elbow LQ1L-M Metric Size) Specifications

Common Specifications

Item Model
LQ1□10 LQ1□20 LQ1□30 LQ1□40 LQ1□50 LQ1□60
Material New PFA Note:
Maximum operating pressure (at 20°C) 1.0 MPa
Withstand pressure Refer to the withstand pressure and heat resistance performance curves.
Operating temperature 0 to 200℃

Note: For made-to-order products, the main body of the fitting is made of PTFE.

Withstand pressure and heat resistance performance

Withstand pressure and heat resistance performance curves

Withstand pressure and heat resistance performance curves

Series

Series Size Pipe connection port diameter Tube outer diameter
Metric Size
None 1/8 "1/4 "3/8 "1/2 "3/4 "1 "ø3 ø4 ø6 ø8 ø10 ø12 ø19 ø25
Elbow
LQ1L 		Male 1 - ○ - - - - - ○ ○ - - - - - -
2 - ○ ○ - - - - ● ● ○ - - - - -
3 - ○ ○ ○ - - - ● ● ● ● ○ - - -
4 - - ○ ○ ○ - - ● ● ● ● ● ○ - -
5 - - - ○ ○ ○ - - - ● ● ○ ● ○ -
6 - - - ○ - ○ ○ - - - - - ● ● ○

Note: ○ Standard size ● With reducer

Outline/dimensions

Male Elbow Outline Drawing

Male Elbow Outline Drawing

Male Elbow dimensional drawing

Male Elbow dimensional drawing

(E): Shows the approximate dimension of the inserted tubing from the end of the nut
W: Width across flats

Male Elbow dimensional drawing for size 1

Male Elbow dimensional drawing for size 1

Male Elbow dimensional drawing for sizes 2 to 5

Male Elbow dimensional drawing for sizes 2 to 5

Male Elbow dimensional drawing for size 6

Male Elbow dimensional drawing for size 6

Model Applicable tube outer diameter Connection thread
R/NPT 		A E H L1L2M
LQ1L11-M□ ø4 1/8 "11.5 10 - 18 15 11.5
LQ1L12-M□ ø3
LQ1L21-M□ ø6 1/8 "14.5 15 14 27 20.5 16.5
LQ1L22-M□ ø4
LQ1L2C-M□ ø3
LQ1L23-M□ ø6 1/4 "
LQ1L24-M□ ø4
LQ1L2F-M□ ø3
LQ1L31-M□ ø10 1/4 "20 20 17 35 26.5 23
LQ1L32-M□ ø8
LQ1L33-M□ ø6
LQ1L34-M□ ø10 3/8 "
LQ1L35-M□ ø8
LQ1L36-M□ ø6
LQ1L37-M□ ø4 21.1 15 14 31.6 27.1 16.5
LQ1L3E-M□ ø3
LQ1L39-M□ ø10 1/8 "20.6 20 17 36.6 24.1 23
LQ1L310-M□ ø8

Units: mm
*Refer to the manufacturer's catalog for other model numbers.

Notes For Tubing

1. Use the dedicated tool for connecting tubes.
Refer to "High-Purity Fluoropolymer Fittings / Hyper Fitting LQ1, 2 Series Work Procedure Instructions" for notes regarding tube connections and dedicated tools.

Dedicated Tool Outline Drawing

Dedicated Tool Outline Drawing

2. Tighten the nut as far as the end surface of the main body. In order to confirm that it has properly reached the end surface of the main body, tighten by a further 1/8th (approx.) of a turn. You will know that you have sufficiently tightened the nut if it will turn no further past this point. Be sure to also refer to the appropriate tightening torques shown below.

Body size Torque (N·m)
2 0.3 to 0.4
3 0.8 to 1.0
4 1.0 to 1.2
5 2.5 to 3.0
6 5.5 to 6.0

Note: For body size 1, tighten by hand.

Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
LQ1L4F-M
LQ1L4F-M-1
LQ1L4F-MN
LQ1L4F-MN-1
LQ1L59-M
LQ1L59-M-1
LQ1L59-MN
LQ1L59-MN-1
LQ1L67-M
LQ1L67-M-1
LQ1L67-MN
LQ1L67-MN-1
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Materiale corpo principale Diam. esterno tubo applicabile (mm) D (D1) Con vite di collegamento M (M1) Misura nominale vite di collegamento M (M1) Packaging Size of Body

61.87 €

1 26 giorni PTFE3R1/2B(15A)Confezionamento sterile classe M3.5 Equivalente4

61.47 €

1 26 giorni PTFE3R1/2B(15A)Confezionamento standard equivalente alla classe M5.54

61.87 €

1 26 giorni PTFE3NPT (Male thread)1/2B(15A)Confezionamento sterile classe M3.5 Equivalente4

61.47 €

1 26 giorni PTFE3NPT (Male thread)1/2B(15A)Confezionamento standard equivalente alla classe M5.54

249.13 €

1 26 giorni PTFE19R3/8B(10A)Confezionamento sterile classe M3.5 Equivalente5

248.74 €

1 26 giorni PTFE19R3/8B(10A)Confezionamento standard equivalente alla classe M5.55

249.13 €

1 26 giorni PTFE19NPT (Male thread)3/8B(10A)Confezionamento sterile classe M3.5 Equivalente5

248.74 €

1 26 giorni PTFE19NPT (Male thread)3/8B(10A)Confezionamento standard equivalente alla classe M5.55

249.13 €

1 26 giorni PTFE25R3/8B(10A)Confezionamento sterile classe M3.5 Equivalente6

248.74 €

1 26 giorni PTFE25R3/8B(10A)Confezionamento standard equivalente alla classe M5.56

249.13 €

1 26 giorni PTFE25NPT (Male thread)3/8B(10A)Confezionamento sterile classe M3.5 Equivalente6

248.74 €

1 26 giorni PTFE25NPT (Male thread)3/8B(10A)Confezionamento standard equivalente alla classe M5.56

Loading...

  1. 1
 

Informazioni di base

Tipo Fitting Body Tipo di collegamento Screw⇔Pipe Raccordo filettatura-tubo Threaded Elbow
Max. temperatura d'esercizio(°C) 200

Configura

Ripristina

12Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Diam. esterno tubo applicabile (mm) D (D1)

    • 3
    • 4
    • 6
    • 8
    • 10
    • 12
    • 19
    • 25

    Ripristina

  • Con vite di collegamento M (M1)

    • R
    • NPT (Male thread)

    Ripristina

  • Misura nominale vite di collegamento M (M1)

    • 1/8B(6A)
    • 1/4B(8A)
    • 3/8B(10A)
    • 1/2B(15A)
    • 3/4B(20A)
    • 1B(25A)

    Ripristina

  • Packaging

    • Confezionamento sterile classe M3.5 Equivalente
    • Confezionamento standard equivalente alla classe M5.5

    Ripristina

  • Size of Body

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6

    Ripristina

  • Tipo

    • LQ1□□□-□□-□

    Ripristina

  • Materiale corpo principale

    • PTFE
    • PFA

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • Stesso giorno
    • 4 giorni o meno
    • 26 giorni o meno

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.