LQ1T, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a T
- In Offerta
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· Shows strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· For use at 200°C. The trapezoidal thread prevents the angled insertion of nuts.
· The reducer system allows you to switch tube sizes without having to change the body itself.
(i)Nota
- Refer to the catalog for product specifications.
- Product images may be representative images. Refer to the catalog for details.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Fluoropolymer Piping Equipment Union Tee LQ1T Inch Size Specifications
Union Tee LQ1T External Appearance
Union Tee LQ1T dimensional drawing
Dimensional drawing for size 1
Dimensional drawing for sizes 2 to 5
Dimensional drawing for size 6
| Model | Applicable tube outer diameter | B | E | F | G | H | L | M | Minimum hole diameter |
|---|---|---|---|---|---|---|---|---|---|
| LQ1T1A | 1/8 " | 2 | 10 | 4 | 8 | - | 18.5 | 11.5 | 1.8 |
| LQ1T2A□□ | 1/4 " | 4 | 15 | 6 | 12 | 14 | 28 | 16.5 | 3.6 |
| LQ1T2B□□ | 3/16 " | 2.9 | |||||||
| LQ1T2C□□ | 1/8 " | 1.8 | |||||||
| LQ1T3A□□ | 3/8 " | 5 | 20 | 9 | 18 | 17 | 36.5 | 23 | 5.8 |
| LQ1T3B□□ | 1/4 " | 3.6 | |||||||
| LQ1T4A□□ | 1/2 " | 6 | 24 | 9 | 18 | 21 | 43 | 28 | 9 |
| LQ1T4B□□ | 3/8 " | 5.8 | |||||||
| LQ1T5A□□ | 3/4 " | 7 | 29 | 14 | 28 | 26 | 54 | 39 | 15 |
| LQ1T5B□□ | 1/2 " | 9 | |||||||
| LQ1T6A□□ | 1 " | 8 | 39.5 | 18 | 36 | 36 | 69.5 | 49 | 21.2 |
| LQ1T6B□□ | 3/4 " | 15 |
*(E): Shows the approximate dimension of the inserted tubing from the end of the nut.
Units for dimensions other than applicable tube outer diameter: mm
Specifications
| Item | Model | |||||
|---|---|---|---|---|---|---|
| LQ1□10 | LQ1□20 | LQ1□30 | LQ1□40 | LQ1□50 | LQ1□60 | |
| Material | New PFA Note: | |||||
| Maximum operating pressure (at 20°C) | 1.0 MPa | |||||
| Withstand pressure | Refer to the withstand pressure and heat resistance performance curves. | |||||
| Operating temperature | 0 to 200℃ | |||||
Note: For made-to-order products, the main body of the fitting is made of PTFE.
Withstand pressure and heat resistance performance
Union Tee LQ1T withstand pressure and heat resistance performance
Type of line
- Thick line: 1/8 "· 3/16 "· 1/4 "Tube
- Thin line: 1/2 "Tube
- Thick dotted line: 3/8 "Tube
- Thin dotted line: 3/4 "· 1 "Tube
Notes For Tubing
Using the dedicated tube connecting tool (example)
1. Use the dedicated tool for connecting tubes.
| Body size | Torque (N·m) |
|---|---|
| 2 | 0.3 to 0.4 |
| 3 | 0.8 to 1.0 |
| 4 | 1.0 to 1.2 |
| 5 | 2.5 to 3.0 |
| 6 | 5.5 to 6.0 |
Note: For body size 1, tighten by hand.
2. Tighten the nut as far as the end surface of the main body. In order to confirm that it has properly reached the end surface of the main body, tighten by a further 1/8th (approx.) of a turn.
You will know that you have sufficiently tightened the nut if it will turn no further past this point. Be sure to also refer to the appropriate tightening torques shown to the left for when tubing/piping.
Codice componente
|
|---|
| LQ1T2A |
| LQ1T3B |
| LQ1T3B3A |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Tipo di collegamento | Raccordo tubo-tubo con diam. uguale | Raccordo tubo-tubo con diam. diverso | D.E. tubo applicabile (pollici) D (D1) | D.E. tubo applicabile (pollici) D2 | Packaging | Size of Body | |
|---|---|---|---|---|---|---|---|---|---|---|---|
36.65 € | 1 | 4 giorni | Pipe⇔Pipe, same diameters connection | Union Tees | - | 1/4 | - | Confezionamento sterile classe M3.5 Equivalente | 2 | ||
55.31 € | 1 | 26 giorni | Pipe⇔Pipe, same diameters connection | Union Tees | - | 1/4 | - | Confezionamento sterile classe M3.5 Equivalente | 3 | ||
55.31 € | 1 | 26 giorni | Pipe⇔Pipe, different diameters connection | - | Reducing Union Tee | 1/4 | 3/8 | Confezionamento sterile classe M3.5 Equivalente | 3 |
Loading...
Informazioni di base
| Tipo | Fitting Body | Materiale corpo principale | PFA | Max. temperatura d'esercizio(°C) | 200 |
|---|
Configura
Proprietà di base
-
Tipo di collegamento
- Pipe⇔Pipe, same diameters connection
- Pipe⇔Pipe, different diameters connection
-
Raccordo tubo-tubo con diam. uguale
- Union Tees
-
Raccordo tubo-tubo con diam. diverso
- Reducing Union Tee
-
D.E. tubo applicabile (pollici) D2
-
Packaging
- Confezionamento sterile classe M3.5 Equivalente
- Confezionamento standard equivalente alla classe M5.5
-
Size of Body
- 1
- 2
- 3
- 4
- 5
- 6
-
Tipo
- LQ1□□□-□□-□
-
D.E. tubo applicabile (pollici) D (D1)
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- Stesso giorno
- 4 giorni o meno
- 26 giorni o meno
Attributi opzionali
- Product images may be representative images. Refer to the catalog for details.
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.