KQB2T-xx, Raccordi istantanei metallici, Intermedio a T di riduzione
[Features]
· Compact and lightweight.
· Grease-free.
· Fluid temperature: -5 to 150°C.
· Brass parts: Electroless nickel plated.
[Applications]
· Used to connect tubes in 90˚ directions from the same piping, reducing the size of the tubes.
(i)Nota
- Le immagini dei prodotti possono essere immagini rappresentative. Fare riferimento al catalogo per i dettagli sulla forma.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Different Diameter Tee: KQB2T Outline Drawing And Dimensions
Different Diameter Tee: KQB2T outline drawing
(Unit: mm)
| Applicable tubing outer diameter (mm) | Model | øD1Note 1) | øD2Note 1) | L1 | L2 | L3 | Q | M1 | M2 | øN | øO | Effective cross-sectional areaNote 2) (mm2) | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| a | b | |||||||||||||
| ø3.2 | ø4 | KQB2T23-04 | 9.1 | 8.3 | 14.2 | 14.1 | 21.1 | 4.1 | 12.6 | 12 | 3.2 | 5.6 | 3.8 | 8.5 |
| ø4 | ø6 | KQB2T04-06 | 11.4 | 9.1 | 15.6 | 15.7 | 22.8 | 4.4 | 13.6 | 12.6 | 3.2 | 5.6 | 7.1 | 11 |
| ø6 | ø8 | KQB2T06-08 | 13.7 | 11.4 | 19.1 | 17.7 | 29.5 | 6.4 | 16.1 | 13.6 | 4.2 | 8 | 16.4 | 20 |
| ø8 | ø10 | KQB2T08-10 | 16.6 | 13.7 | 21 | 21.2 | 32.1 | 7.1 | 17 | 16.1 | 4.2 | 8 | 36 | 29.8 |
| ø10 | ø12 | KQB2T10-12 | 18.7 | 16.6 | 23.6 | 23.1 | 35.7 | 8.1 | 18.6 | 17 | 4.2 | 8 | 56 | 41.3 |
| ø12 | ø16 | KQB2T12-16 | 24.6 | 18.7 | 26.8 | 26.7 | 39.9 | 9.1 | 20.8 | 18.6 | 4.2 | 8 | 108.5 | 58 |
Note 1) øD1 and øD2 are the maximum diameters.
Note 2) Value of FEP tubing.
Metal One-Touch Fitting KQB2 Series Common Specifications (Reference)
Inch size × UNF/NPT thread, millimeter size × G thread
Applicable tubing size
ø3.2 to ø16, ø1/8 "to ø1/2 "
Connection thread
M, R, Rc, UNF, NPT, G
Fluid temperature
-5 to 150°C
Grease-free
Applicable tubing materials
FEP / PFA / Nylon / Soft nylon / Polyurethane / Polyolefin
Electroless nickel plated (brass parts)
Structure
Metal One-Touch Fitting KQB2 Series structural drawing
| No. | Part name | Material |
|---|---|---|
| 1 | Release button | SUS304 |
| 2 | Guide 1 | SUS304 |
| 3 | Guide 2 | SUS304 |
| 4 | Chuck | SUS304 |
| 5 | Seal | Special FKM (fluorine coated) |
| 6 | Male Connector body | C3604 (electroless nickel plated) |
| 7 | Male Elbow body | SUS316 |
| 8 | O-Ring | Special FKM (fluorine coated) |
| 9 | Stud | C3604 (electroless nickel plated) |
Applicable Tubing
| Tube materials | FEP / PFA / Nylon / Soft Nylon / Polyurethane / Polyolefin |
|---|---|
| Tube outer diameter | ø3.2, ø4, ø6, ø8, ø10, ø12, ø16 |
Specifications
| Usable fluids | Air, water |
|---|---|
| Operating pressure rangeNote 1) | -100 kPa to 1 MPaNote 2) |
| Proof pressure | 3.0 MPa |
| Ambient and fluid temperatureNote 3) | -5 to 150°C (no freezing)Note 2) |
| Lubricant | Grease-free finish |
| Seal (thread portion) | With sealant |
Note 1) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.
Note 2) Check the operating pressure range and operating temperature range of the tube.
Note 3) It is recommended that you use the inner sleeve in the following conditions. (Except ø3.2)
- When using in an environment where the fluid temperature changes drastically.
- When using at a high temperature.
Codice componente
|
|---|
| KQB2T01-03 |
| KQB2T03-07 |
| KQB2T04-06 |
| KQB2T06-08 |
| KQB2T07-09 |
| KQB2T08-10 |
| KQB2T09-11 |
| KQB2T10-12 |
| KQB2T11-13 |
| KQB2T12-16 |
| KQB2T23-04 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | D.E.1 tubo applicabile (φ) | |
|---|---|---|---|---|---|
14.60 € | 1 | 26 giorni | - | ||
15.37 € | 1 | 26 giorni | - | ||
15.35 € | 1 | 4 giorni | 4 | ||
15.35 € | 1 | 4 giorni | 6 | ||
15.37 € | 1 | 26 giorni | - | ||
20.23 € | 1 | 4 giorni | 8 | ||
20.23 € | 1 | 26 giorni | - | ||
26.06 € | 1 | 4 giorni | 10 | ||
26.08 € | 1 | 26 giorni | - | ||
44.65 € | 1 | 43 giorni | - | ||
14.58 € | 1 | 4 giorni | - |
Loading...
Informazioni di base
| Tipo | Ad azione singola | Tipo raccordo | Giunto con diametri diversi | Liquido applicabile | Acqua / Aria |
|---|---|---|---|---|---|
| Materiale corpo principale | Altro | Applicazione | Standard/Mini | Giunto, diam. diverso | Giunto riduttore a T |
| Number of Connection Tubes(pc.) | 3 |
Configura
Proprietà di base
-
D.E.1 tubo applicabile(φ)
-
Tipo
- KQB2T
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 4 giorni o meno
- 26 giorni o meno
- 43 giorni o meno
Attributi opzionali
- Product images may be representative images. Refer to the catalog for shape details.
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.