Gomito maschio con prolunga KQB2W attacco a innesto rapido in metallo (KQB2W23-M5)
Dettagli del prodotto:
Codice articolo del costruttore: KQB2W23-M5
Marca: SMC
Prezzo: 6.68 €
Tempi di consegna: 4 giorni
Dati Tecnici:
D.E.1 tubo applicabile: - φ
Connection Type: M
Connection screw: 5×0.8
(i)Nota
- Le immagini dei prodotti possono essere immagini rappresentative. Fare riferimento al catalogo per i dettagli sulla forma.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
KQB2W23-M5
Extended Male Elbow: KQB2W Outline Drawings And Dimensions
Extended Male Elbow: KQB2W outline drawings
(Unit: mm)
| Applicable tubing Outer Diameter (mm) | Connection Thread R, M | Model | H (width across flats) | øDNote 1) | L1 | L2 | A* | M | Effective cross-sectional areaNote 2) (mm2) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|
| ø3.2 | M5 × 0.8 | KQB2W23-M5 | 8 | 8.3 | 13.1 | 31.2 | 32.4 | 12 | 2.8 | 13.5 |
| 1/8 | KQB2W23-01S | 10 | 13.6 | 31.3 | 32.3 | 15.3 | ||||
| 1/4 | KQB2W23-02S | 14 | 35.1 | 34.5 | 34.7 | |||||
| ø4 | M5 × 0.8 | KQB2W04-M5 | 8 | 9.1 | 13.7 | 31.6 | 33.2 | 12.6 | 3 | 14.1 |
| 1/8 | KQB2W04-01S | 10 | 14.4 | 31.7 | 33.1 | 4 | 16.2 | |||
| 1/4 | KQB2W04-02S | 14 | 35.5 | 35.3 | 35.6 | |||||
| ø6 | M5 × 0.8 | KQB2W06-M5 | 8 | 11.4 | 14.7 | 32.7 | 35.4 | 13.6 | 3 | 16 |
| 1/8 | KQB2W06-01S | 10 | 15.9 | 32.8 | 10.9 | 17.8 | ||||
| 1/4 | KQB2W06-02S | 14 | 36.6 | 37.6 | 37.2 | |||||
| 3/8 | KQB2W06-03S | 17 | 38 | 38.6 | 60.3 | |||||
| ø8 | 1/8 | KQB2W08-01S | 12 | 13.7 | 18.6 | 37 | 40.7 | 16.1 | 20.5 | 28.9 |
| 1/4 | KQB2W08-02S | 14 | 19.1 | 40.2 | 42.3 | 39.2 | ||||
| 3/8 | KQB2W08-03S | 17 | 41.6 | 43.3 | 63.7 | |||||
| ø10 | 1/4 | KQB2W10-02S | 14 | 16.6 | 21 | 46.6 | 50.2 | 17 | 33.5 | 42.1 |
| 3/8 | KQB2W10-03S | 17 | 45.9 | 49.1 | 64.5 | |||||
| 1/2 | KQB2W10-04S | 22 | 50.1 | 52 | 123 | |||||
| ø12 | 1/4 | KQB2W12-02S | 14 | 18.7 | 22.6 | 47.7 | 52.3 | 18.6 | 47.7 | 46 |
| 3/8 | KQB2W12-03S | 17 | 23.6 | 49 | 53.2 | 58.2 | ||||
| 1/2 | KQB2W12-04S | 22 | 53.2 | 56.1 | 118 | |||||
| ø16 | 3/8 | KQB2W16-03S | 19 | 24.6 | 26.3 | 57.6 | 64.1 | 20.8 | 71 | 89.6 |
| 1/2 | KQB2W16-04S | 22 | 27.3 | 61.4 | 66.6 | 100 | 116 |
- *Reference dimensions of R thread after installation
Note 1) øD is the maximum diameter.
Note 2) Value of FEP tubing.
Value of nylon tubing for ø16 only.
Metal One-Touch Fitting KQB2 Series Common Specifications (Reference)
Inch size × UNF/NPT thread, millimeter size × G thread
Applicable tubing size
ø3.2 to ø16, ø1/8 "to ø1/2 "
Connection thread
M, R, Rc, UNF, NPT, G
Fluid temperature
-5 to 150°C
Grease-free
Applicable tubing materials
FEP / PFA / Nylon / Soft nylon / Polyurethane / Polyolefin
Electroless nickel plated (brass parts)
Structure
Metal One-Touch Fitting KQB2 Series structural drawing
| No. | Part name | Material |
|---|---|---|
| 1 | Release button | SUS304 |
| 2 | Guide 1 | SUS304 |
| 3 | Guide 2 | SUS304 |
| 4 | Chuck | SUS304 |
| 5 | Seal | Special FKM (fluorine coated) |
| 6 | Male Connector body | C3604 (electroless nickel plated) |
| 7 | Male Elbow body | SUS316 |
| 8 | O-Ring | Special FKM (fluorine coated) |
| 9 | Stud | C3604 (electroless nickel plated) |
Applicable tubing
| Tube materials | FEP / PFA / Nylon / Soft Nylon / Polyurethane / Polyolefin |
|---|---|
| Tube outer diameter | ø3.2, ø4, ø6, ø8, ø10, ø12, ø16 |
Specifications
| Usable fluids | Air, water |
|---|---|
| Operating pressure rangeNote 1) | -100 kPa to 1 MPaNote 2) |
| Proof pressure | 3.0 MPa |
| Ambient and fluid temperatureNote 3) | -5 to 150°C (no freezing)Note 2) |
| Lubricant | Grease-free finish |
| Seal (thread portion) | With sealant |
Note 1) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.
Note 2) Check the operating pressure range and operating temperature range of the tube.
Note 3) It is recommended that you use the inner sleeve in the following conditions. (Except ø3.2)
- When using in an environment where the fluid temperature changes drastically.
- When using at a high temperature.
Codice componente
|
|---|
| KQB2W23-M5 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | D.E.1 tubo applicabile (φ) | Connection Type | Connection screw | |
|---|---|---|---|---|---|---|---|
6.68 € | 1 | 4 giorni | - | M | 5×0.8 |
Loading...
Informazioni di base
| Tipo | Ad azione singola/filettatura | Tipo raccordo | Direzione di montaggio a vite | Liquido applicabile | Acqua / Aria |
|---|---|---|---|---|---|
| Materiale corpo principale | Altro | Applicazione | Standard/Mini | Materiale filettatura | EN CW614N Equiv. (Nichelatura chimica) |
| Montaggio a vite, direzione | Gomito | Gomiti | Gomito triplo universale | Number of Connection Tubes(pc.) | 1 |
Si trova sulla pagina di Gomito maschio con prolunga KQB2W attacco a innesto rapido in metallo, il codice articolo è il seguente: KQB2W23-M5.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto KQB2W23-M5.
Configura
Proprietà di base
-
D.E.1 tubo applicabile(φ)
-
Tipo
- KQB2W
-
Connection Type
- G
- M
- NPT
- R
-
Connection screw
- 1/2
- 1/4
- 1/8
- 3/8
- 5×0.8
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 4 giorni o meno
- 22 giorni o meno
- 26 giorni o meno
Attributi opzionali
- Product images may be representative images. Refer to the catalog for shape details.
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| KQB2W04-01S |
| KQB2W04-02S |
| KQB2W04-G01 |
| KQB2W04-G02 |
| KQB2W04-M5 |
| KQB2W06-01S |
| Codice componente | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | D.E.1 tubo applicabile (φ) | Connection Type | Connection screw |
|---|---|---|---|---|---|---|---|
5.31 € | 1 | 26 giorni | 4 | R | 1/8 | ||
6.03 € | 1 | 26 giorni | 4 | R | 1/4 | ||
6.03 € | 1 | 4 giorni | 4 | G | 1/8 | ||
7.31 € | 1 | 4 giorni | 4 | G | 1/4 | ||
5.08 € | 1 | 4 giorni | 4 | M | 5×0.8 | ||
5.31 € | 1 | 4 giorni | 6 | R | 1/8 |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.