KQG2L, Raccordi istantanei in acciaio inox 316, D'estremità a gomito (KQG2L07-N03S)
Dettagli del prodotto:
Codice articolo del costruttore: KQG2L07-N03S
Marca: SMC
Prezzo: 24.97 €
Tempi di consegna: 26 giorni
Dati Tecnici:
D.E.1 tubo applicabile: - φ
Connection Type: NPT
Connection screw: 3/8
(i)Nota
- For materials and specification details, please refer to the catalog.
- Product images may be representative images. Refer to the catalog for details.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
KQG2L07-N03S
Elbow Union Fitting: KQG2L Outline Drawing And Dimensions
Millimeter size type
- Applicable tube: millimeter size
- Connection thread: M, R, Rc
Elbow Union Fitting: KQG2L Outline Drawing (With M5)
Elbow Union Fitting: KQG2L Outline Drawing (With R)
| Applicable tubing outer diameter (mm) | Connection thread: R, M | Model | H (width across flats) | øDNote 1) | L1 | L2 | A* | M | Effective cross-sectional area (mm2 Note 2) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|
| ø3.2 | M5 × 0.8 | KQG2L23-M5 | 8 | 8.3 | 13.1 | 14.8 | 16 | 12 | 2.6 | 6.3 |
| 1/8 | KQG2L23-01S | 10 | 13.6 | 14.9 | 15.9 | 3 | 7.6 | |||
| 1/4 | KQG2L23-02S | 14 | 18.7 | 18.1 | 16 | |||||
| ø4 | M5 × 0.8 | KQG2L04-M5 | 8 | 9.1 | 13.7 | 15.2 | 16.8 | 12.6 | 3.5 | 6.9 |
| 1/8 | KQG2L04-01S | 10 | 14.4 | 15.3 | 16.7 | 4.2 | 8.5 | |||
| 1/4 | KQG2L04-02S | 14 | 19.1 | 18.9 | 16.8 | |||||
| ø6 | M5 × 0.8 | KQG2L06-M5 | 8 | 11.4 | 14.7 | 16.3 | 19 | 13.6 | 3.5 | 8.8 |
| 1/8 | KQG2L06-01S | 10 | 15.9 | 16.4 | 11.4 | 10.1 | ||||
| 1/4 | KQG2L06-02S | 14 | 20.2 | 21.2 | 18.4 | |||||
| 3/8 | KQG2L06-03S | 17 | 21.6 | 22.2 | 29.9 | |||||
| ø8 | 1/8 | KQG2L08-01S | 12 | 13.7 | 18.6 | 18.3 | 22 | 16.1 | 21.6 | 14.6 |
| 1/4 | KQG2L08-02S | 14 | 19.1 | 21.5 | 23.6 | 20.3 | ||||
| 3/8 | KQG2L08-03S | 17 | 22.9 | 24.6 | 31.6 | |||||
| ø10 | 1/8 | KQG2L10-01S | 12 | 16.6 | 20 | 19.7 | 24.9 | 17 | 21.6 | 20.2 |
| 1/4 | KQG2L10-02S | 14 | 21 | 22.9 | 26.5 | 35.2 | 23.3 | |||
| 3/8 | KQG2L10-03S | 17 | 24.3 | 27.5 | 33.6 | |||||
| 1/2 | KQG2L10-04S | 22 | 28.5 | 30.4 | 60.1 | |||||
| ø12 | 1/4 | KQG2L12-02S | 14 | 18.7 | 22.6 | 24 | 28.6 | 18.6 | 50.2 | 27.1 |
| 3/8 | KQG2L12-03S | 17 | 23.6 | 25.3 | 29.5 | 33.7 | ||||
| 1/2 | KQG2L12-04S | 22 | 29.5 | 32.4 | 58.7 | |||||
| ø16 | 3/8 | KQG2L16-03S | 19 | 24.6 | 26.3 | 28 | 34.5 | 20.8 | 71 | 46.3 |
| 1/2 | KQG2L16-04S | 22 | 27.3 | 31.8 | 37 | 100 | 61.3 |
*Reference dimensions of R thread after installation
Note 1) øD is the maximum diameter.
Note 2) Value of FEP tubing. Value of nylon tubing for ø16 only.
Inch size type
- Applicable tube: inch size
- Connection thread: UNF, NPT
Elbow Union Fitting: KQG2L Outline Drawing (With 10-32UNF)
Elbow Union Fitting: KQG2L Outline Drawing (With NPT)
| Applicable tubing outer diameter (inch) | Connection thread: UNF, NPT | Model | H (width across flats) | øDNote 1) | L1 | L2 | A* | M | Effective cross-sectional area (mm2) Note 2) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|
| ø1/8 " | 10-32UNF | KQG2L01-32 | 8 | 8.3 | 13.1 | 14.8 | 16 | 12 | 2.6 | 6.3 |
| 1/8 | KQG2L01-N01S | 12 | 13.6 | 14.9 | 15.8 | 3 | 9 | |||
| 1/4 | KQG2L01-N02S | 14 | 18.7 | 18.4 | 16.7 | |||||
| ø5/32 " | 10-32UNF | KQG2L03-32 | 8 | 9.1 | 13.7 | 15.2 | 16.8 | 12.6 | 3.5 | 6.9 |
| 1/8 | KQG2L03-N01S | 12 | 14.4 | 15.3 | 16.6 | 4.2 | 9.9 | |||
| 1/4 | KQG2L03-N02S | 14 | 19.1 | 19.2 | 17.6 | |||||
| ø1/4 " | 10-32UNF | KQG2L07-32 | 8 | 11.7 | 14.7 | 16.5 | 19.3 | 13.5 | 3.5 | 8.9 |
| 1/8 | KQG2L07-N01S | 12 | 15.9 | 16.6 | 19.2 | 11.4 | 11.7 | |||
| 1/4 | KQG2L07-N02S | 14 | 20.4 | 21.8 | 19.4 | |||||
| 3/8 | KQG2L07-N03S | 19 | 22.2 | 23.3 | 34.2 | |||||
| ø5/16 " | 1/8 | KQG2L09-N01S | 12 | 13.7 | 18.6 | 18.3 | 21.9 | 16.1 | 21.6 | 15.1 |
| 1/4 | KQG2L09-N02S | 14 | 19.1 | 21.5 | 23.9 | 21.1 | ||||
| 3/8 | KQG2L09-N03S | 19 | 23.3 | 25.4 | 35.7 | |||||
| ø3/8 " | 1/8 | KQG2L11-N01S | 12 | 16 | 20 | 19.4 | 24.2 | 16.6 | 21.6 | 19.7 |
| 1/4 | KQG2L11-N02S | 14 | 21 | 22.6 | 26.2 | 35.2 | 23.2 | |||
| 3/8 | KQG2L11-N03S | 19 | 24.4 | 27.7 | 36.7 | |||||
| 1/2 | KQG2L11-N04S | 22 | 28.2 | 29.8 | 60.2 | |||||
| ø1/2 " | 1/4 | KQG2L13-N02S | 14 | 19.6 | 22.7 | 24.4 | 29.8 | 18.5 | 50.2 | 29.4 |
| 3/8 | KQG2L13-N03S | 19 | 23.7 | 26.1 | 31.2 | 39.2 | ||||
| 1/2 | KQG2L13-N04S | 22 | 29.9 | 33.3 | 61.3 |
*Reference NPT thread dimensions after installation
Note 1) øD is the maximum diameter.
Note 2) Value of FEP tubing.
SUS316 One-Touch Pipe Fitting KQG2 Series Common Specifications (Reference)
Applicable tubing
- Tube materials: FEP, PFA, nylon, soft nylonNote 1), polyurethane, polyolefin
- Tube outer diameter (millimeter size): ø3.2, ø4, ø6, ø8, ø10, ø12, ø16
- Tube outer diameter (inch size): ø1/8, "ø5/32, "ø1/4, "ø5/16, "ø3/8, "ø1/2 "
Note 1) For soft nylon tube, water cannot be used.
Specifications
| Usable fluids | Air, water, steamNote 2) Note 3) |
|---|---|
| Operating pressure rangeNote 4) | -100 kPa to 1 MPaNote 5) |
| Proof pressure | 3.0 MPa |
| Ambient temperature and operating fluid temperatureNote 6) | -5 to 150°C (no freezing)Note 5) |
| Lubricant | Grease-free finish |
| Seal (thread portion) | With sealant |
Note 2) Confirm applicable tube separately.
Note 3) Using special FKM that is resistant to steam.
Note 4) It is not completely airtight, so please avoid use in leak testers, etc., where a vacuum is maintained.
Note 5) Please confirm operating pressure range and operating temperature range.
Note 6) Please equip an inner sleeve for the following conditions. (ø3.2, ø1/8 "are excluded)
· When using with fluids or in environments that have extreme temperature changes.
· When using at a high temperature.
Temperature conditions for equipping inner sleeve
| Tube used | Temperature |
|---|---|
| FEP tube / TH series | 80°C or more |
| Super PFA tube / TL series | 120°C or more |
Structural Drawing
SUS316 One-Touch Pipe Fitting KQG2 Series Structural Drawing
Components
| Number | Part Name | Material |
|---|---|---|
| 1 | Release button | SUS316 |
| 2 | Guide 1 | SUS316 |
| 3 | Guide 2 | SUS316 |
| 4 | Chuck | SUS316 |
| 5 | Seal | Special FKM (fluorine coated) |
| 6 | Male Connector body | SUS316 |
| 7 | Male Elbow body | SUS316 |
| 8 | O-ring | Special FKM (fluorine coated) |
| 9 | Stud | SUS316 |
Codice componente
|
|---|
| KQG2L07-N03S |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | D.E.1 tubo applicabile (φ) | Connection Type | Connection screw | |
|---|---|---|---|---|---|---|---|
24.97 € | 1 | 26 giorni | - | NPT | 3/8 |
Loading...
Informazioni di base
| Tipo | Ad azione singola/filettatura | Tipo raccordo | Direzione di montaggio a vite | Liquido applicabile | Acqua / Aria |
|---|---|---|---|---|---|
| Materiale corpo principale | Acciaio inox (EN 1.4401 Equiv.) | Applicazione | Standard/Mini | Materiale filettatura | Acciaio inox (EN 1.4401 Equiv.) |
| Montaggio a vite, direzione | Gomito | Gomiti | Giunto a gomito | Number of Connection Tubes(pc.) | 1 |
Si trova sulla pagina di KQG2L, Raccordi istantanei in acciaio inox 316, D'estremità a gomito, il codice articolo è il seguente: KQG2L07-N03S.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto KQG2L07-N03S.
Configura
Proprietà di base
-
D.E.1 tubo applicabile(φ)
-
Tipo
- KQG2L
-
Connection Type
- M
- NPT
- R
- UNF
-
Connection screw
- 1/2
- 1/4
- 1/8
- 3/8
- 5×0.8
- 10-32
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- Stesso giorno
- 3 giorni o meno
- 4 giorni o meno
- 7 giorni o meno
- 26 giorni o meno
- 39 giorni o meno
- 43 giorni o meno
Attributi opzionali
- Product images may be representative images. Refer to the catalog for details.
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| KQG2L03-32 |
| KQG2L03-N01S |
| KQG2L03-N02S |
| KQG2L08-01S |
| KQG2L08-02S |
| KQG2L08-03S |
| Codice componente | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | D.E.1 tubo applicabile (φ) | Connection Type | Connection screw |
|---|---|---|---|---|---|---|---|
16.03 € | 1 | 26 giorni | - | UNF | 10-32 | ||
18.32 € | 1 | Preventivo | - | NPT | 1/8 | ||
24.98 € | 1 | 26 giorni | - | NPT | 1/4 | ||
27.19 € | 1 | 4 giorni | 8 | R | 1/8 | ||
29.68 € | 1 |
Stesso giorno
Stock | 8 | R | 1/4 | ||
29.68 € | 1 |
Stesso giorno
Stock | 8 | R | 3/8 |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.