KK*P-*N, Raccordi S, Dado di raccordo (Codici componente - Download CAD)
[Features]
· Constructed without the use of any steel balls, giving it a large effective area and a slim body design that will not restrict the flow path.
· Equipped as standard with a sleeve cover.
· The loss of effective area is minimized because there is no valve spring to block the flow path.
· The check valve end configuration facilitates a rectifying effect.
· Uses surface contact to achieve reliable sealing.
· Allows flows from either the plug side or the socket side.
· Shock resistance has been improved by changing the lock ring to shock-resistant PBT.
· The sleeve lock mechanism helps prevent accidents caused by unexpected separation.
(i)Nota
- Il prodotto mostrato nell'immagine può essere un'immagine rappresentativa. Fare riferimento al catalogo per forme e tipologie dei prodotti.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
S Coupler KK Series Plug, Nut Fitting Type (For Fiber Reinforced Urethane Hose) specifications
Specifications
| Operating fluid | Air, water |
|---|---|
| Operating pressure rangeNote: | KK2: -100 kPa to 1 MPa KK3: -90kPa to 1MPa KK4/6: 0 to 1 MPa |
| Guaranteed proof pressure | 1.5 MPa |
| Ambient temperature and working fluid temperature | Air: -5 to 60°C Water: 5 to 40°C (no freezing) |
| Plating, seal | With electroless nickel plating (copper-free and fluorine-free application) and male thread sealant |
Note: Do not use with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.
Performance
| Plug/socket connection method | One-touch connection |
|---|---|
| Check valve | Socket: check valve built-in (standard) |
| Sleeve lock mechanism | Manual locking type (standard) |
External appearance / dimensions
Nut Fitting Type (For Fiber Reinforced Urethane Hose) external appearance
Nut Fitting Type (For Fiber Reinforced Urethane Hose) dimensional drawing
| Body size | Model | Applicable hose Internal diameter / outer diameter | H1 Width across flats | H2 Width across flats | L1 | L2 | M | Minimum hole diameter | Effective area mm2 | Weight g |
|---|---|---|---|---|---|---|---|---|---|---|
| 1/8 | KK3P-50N | 5/8 | 14 | 14 | 36.1 | 18.4 | 13.7 | 4.5 | 12.7 | 21.4 |
| KK3P-60N | 6/9 | 17 | 17 | 39.9 | 16.5 | 5.4 | 18.3 | 38.8 | ||
| KK3P-65N | 6.5/10 | 5.9 | 21.9 | 35.9 | ||||||
| 1/4 | KK4P-50N | 5/8 | 14 | 43.9 | 25.2 | 13.7 | 4.5 | 12.7 | 34.7 | |
| KK4P-60N | 6/9 | 17 | 46.7 | 16.5 | 5.4 | 18.3 | 48.4 | |||
| KK4P-65N | 6.5/10 | 5.9 | 21.9 | 45.1 | ||||||
| KK4P-80N | 8/12 | 19 | 19 | 47.6 | 17.4 | 7.4 | 34.4 | 53.2 | ||
| KK4P-85N | 8.5/12.5 | 7.8 | 38.2 | 55.6 | ||||||
| 1/2 | KK6P-80N | 8/12 | 53.4 | 31.0 | 7.4 | 34.4 | 60.5 | |||
| KK6P-85N | 8.5/12.5 | 7.8 | 38.2 | 62.8 | ||||||
| KK6P-110N | 11/16 | 24 | 24 | 57.2 | 20.1 | 10.2 | 65.4 | 96.5 |
Unit: mm
One-touch connection
Easy to connect with one hand. Improved workability.
Connection method 1
Connection method 2
Codice componente
|
|---|
| KK3P-50N |
| KK3P-65N |
| KK4P-50N |
| KK4P-60N |
| KK4P-65N |
| KK4P-80N |
| KK4P-85N |
| KK6P-80N |
| KK6P-110N |
| Codice componente | Relativo a |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Size of Body | Applicable Hose Inner Diameter / Outer Diameter (mm) | |
|---|---|---|---|---|---|---|---|
4.61 € | 5 | 4 giorni | 1/8 | 5/8 | |||
4.61 € | 5 | 4 giorni | 1/8 | 6.5/10 | |||
4.61 € | 5 | 4 giorni | 1/4 | 5/8 | |||
4.61 € | 5 | 4 giorni | 1/4 | 6/9 | |||
4.61 € | 5 | 4 giorni | 1/4 | 6.5/10 | |||
5.18 € | 5 | 4 giorni | 1/4 | 8/12 | |||
5.18 € | 5 | 4 giorni | 1/4 | 8.5/12.5 | |||
6.53 € | 5 | 4 giorni | 1/2 | 8/12 | |||
9.73 € | 5 | 4 giorni | 1/2 | 11/16 |
Loading...
Informazioni di base
| Tipo | Standard | Tipo giunto | Nut Tightening Type | Maschio/Femmina | Plug |
|---|---|---|---|---|---|
| Materiale corpo principale | EN CW614N Equiv. | Liquido applicabile | Water / Air | Struttura valvola | Single Passage Opening Closing Type |
| Ambiente d'esercizio, applicazioni | Standard | With or Without Check Valve | No |
Configura
Proprietà di base
-
Size of Body
- 1/2
- 1/4
- 1/8
-
Applicable Hose Inner Diameter / Outer Diameter(mm)
- 5/8
- 6/9
- 6.5/10
- 8/12
- 8.5/12.5
- 11/16
-
Tipo
- KK□P-□N
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 4 giorni o meno
Attributi opzionali
- The product shown in the image may be a representative image. Refer to the catalog for product shapes and types.
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.