Codice articolo del costruttore: MQQTG40-100DM
Marca: SMC
Prezzo: 1,073.73 €
Tempi di consegna: 26 giorni
D.I. cilindro: D: 40 Ø
Corsa: L: - mm
Ambiente, applicazioni: Standard / A basso attrito (Resistenza interna) / Bassa velocità
Bloccaggio estremità: -
Valvole: -
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
MQQTG40-100DM
Compact Low-Friction Cylinder MQQ Series external appearance
Symbol: Double acting, single rod
Tube Inner Diameter (mm) | 10 | 16 | 20 | 25 | 30 | 40 | |
---|---|---|---|---|---|---|---|
Seal Construction | Metal seal | ||||||
Action | Double acting, single rod | ||||||
Fluid | Air | ||||||
Proof Pressure | 1.05 MPa | ||||||
Maximum operating pressure | 0.5 MPa | ||||||
Minimum operating pressure | 0.005 MPa | ||||||
Ambient and Fluid Temperature | -10 to 80°C | ||||||
Cushioning | Rubber bumper (equipped as standard) | ||||||
Lubrication | Not required (non-lubricated) | ||||||
Rod-end thread | Female thread | ||||||
Stroke Length Tolerance | +1.0 0 | ||||||
Piston Speed | 0.3 to 300 mm/s | ||||||
Total Leakage Rate | Supply Pressure 0.1 MPa | 150 cm3/min | 200 cm3/min | 300 cm3/min | 400 cm3/min | ||
Supply pressure 0.3 MPa | 800 cm3/min | 1,000 cm3/min | 1,200 cm3/min | 1,600 cm3/min | |||
Supply pressure 0.5 MPa | 1,500 cm3/min | 2,000 cm3/min | 3,000 cm3/min | 4,000 cm3/min |
Tube Inner Diameter (mm) | 10 | 16 | 20 | 25 | 30 | 40 | |
---|---|---|---|---|---|---|---|
Seal Construction | Metal seal | ||||||
Action | Double acting, single rod | ||||||
Fluid | Air | ||||||
Proof Pressure | 1.05 MPa | ||||||
Maximum operating pressure | 0.7 MPa | ||||||
Minimum Operating Pressure*1 | 0.005 MPa | ||||||
Ambient and Fluid Temperature | -10 to 80°C | ||||||
Cushioning | Rubber bumper (Standard) | ||||||
Lubrication*2 | Not required (non-lubricated) | ||||||
Rod-end thread | Female thread | ||||||
Stroke Length Tolerance | +1.0 0 | ||||||
Operating Piston Speed*3 | 0.5 to 300 mm/s | ||||||
Total Leakage Rate*4 | Supply Pressure 0.1 MPa | 150 cm3/min | 200 cm3/min | 300 cm3/min | 400 cm3/min | ||
Supply pressure 0.3 MPa | 800 cm3/min | 1,000 cm3/min | 1,200 cm3/min | 1,600 cm3/min | |||
Supply pressure 0.5 MPa | 1,500 cm3/min | 2,000 cm3/min | 3,000 cm3/min | 4,000 cm3/min |
*1: Value when horizontal. (Use clean, dry and nonfreezing air) However, as the stroke increases, it will likely be affected by the weight of its moving parts and the pressure will likely increase by approximately 0.003 to 0.005 MPa due to an offset load from the weight of the rod.
*2: See p. 339 in the SMC catalog regarding information on lubrication. This product uses turbine oil as an initial lubricant. Lubricant may seep out of the rod or the piping port.
*3: Control low speed actuation with differential pressure, speed controllers, etc. (Refer to the recommended circuit example on p. 319 of the SMC catalog for details.)
*4: The values are only for reference and are not guaranteed.
Standard type / MQQT diagram
Lateral-load-resistant type / MQQL (built-in ball bushing type) diagram
Number | Part Name | Material | Notes |
---|---|---|---|
1 | Rod | Carbon steel | Hard chrome plated |
2 | Piston | Special stainless steel | - |
3 | Liner | Special stainless steel | - |
4 | Sleeve | Special stainless steel | - |
5 | Sleeve Retainer | Aluminum alloy | - |
6 | Plate | Aluminum alloy | Hard anodized aluminum |
7 | Guide | Fluororesin | - |
8 | Cylinder Tubing | Aluminum alloy | Hard anodized aluminum |
9 | Bumper A | Polyurethane | - |
10 | Bumper B | Polyurethane | - |
11 | Bushing | Aluminum alloy | - |
12 | Bottom Plate | Aluminum alloy | Hard anodized aluminum |
13 | O-ring | NBR | - |
14 | Retaining Ring | Carbon tool steel | Phosphate conversion coating |
15 | Bolt | Carbon tool steel | Chromate |
16 | Ball Bushing | - | - |
a) Mounting type A (when using the mounting plate threads)
*Always use a flat washer for mounting type A.
b) Mounting type B (when using the cylinder tube threads)
Model | Mounting Type A | Mounting Type B | ||||
---|---|---|---|---|---|---|
Mounting Bolt Size | C (mm) | D: Thread Length (mm) | Mounting Bolt Size | E (mm) | ||
Standard Type MQQT | MQQTB10-□D | M3 ×; 0.5 | 7 | 35 + stroke | M4 ×; 0.7 | 8 to 11 |
MQQTB16-□D | M5 ×; 0.8 | 7 | 35 + stroke | M6 ×; 1 | 13 to 17 | |
MQQTB20-□D | 8.5 | 40 + stroke | ||||
MQQTB25-□D | 9 | 45 + stroke | ||||
MQQTB30-□D | 7.5 | 50 + stroke | ||||
MQQTB40-□D | M6 ×; 1 | 6 | 50 + stroke | M8 ×; 1.25 | 16 to 22 | |
Lateral-Load-Resistant Type MQQL (Built-In Ball Bushing Type) | MQQLB10-□D | M3 ×; 0.5 | 7 | 65 + stroke | M4 ×; 0.7 | 8 to 11 |
MQQLB16-□D | M5 ×; 0.8 | 5.5 | 70 + stroke | M6 ×; 1 | 13 to 17 | |
MQQLB20-□D | 8 | 80 + stroke | ||||
MQQLB25-□D | 6.5 | 85 + stroke | ||||
MQQLB30-□D | 7 | 105 + stroke | ||||
MQQLB40-□D | M6 ×; 1 | 7 | 105 + stroke | M8 ×; 1.25 | 16 to 22 |
□: stroke
*See the SMC catalog for details of other specifications, structures, dimensional drawings, etc.
Codice componente
|
---|
MQQTG40-100DM |
Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | D.I. cilindro: D (Ø) | Corsa: L (mm) | Ambiente, applicazioni | Bloccaggio estremità | Valvole | Pressione di esercizio (MPa) | Cushion | Operating Pressure (MPa) | Support bracket | Port thread type | Rod Tip Shape | Tipo | Materiali di tenuta | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1,073.73 € | 1 | 26 giorni | 40 | - | Standard / A basso attrito (Resistenza interna) / Bassa velocità | - | - | - | Rubber bumper (Standard) | 0.005–0.5 | Flangia lato testa | Rc | Filettatura maschio | Tipo standard | - |
Loading...
Metodo di funzionamento cilindro | A doppia azione | Metodo di funzionamento asta | Aste singole | Profilo corpo principale | Cilindro piatto |
---|---|---|---|---|---|
Funzione aggiuntiva | Standard | Tube Material | Lega di alluminio / Alluminio anodizzato rigido | Specification of cylinder | Cilindro a basso attrito compatto |
Configura
Proprietà di base
Corsa: L(mm)
Ambiente, applicazioni
Bloccaggio estremità
Valvole
Materiali di tenuta
Tipo
D.I. cilindro: D(Ø)
Cushion
Operating Pressure(MPa)
Support bracket
Port thread type
Rod Tip Shape
Tipo
Filtrare per tipo dati CAD
Filtrare per giorni di spedizione standard
Attributi opzionali