MK2T, Cilindro di bloccaggio con staffa rotante, Modello a doppia guida (MK2TB20-20L)
Dettagli del prodotto:
Codice articolo del costruttore: MK2TB20-20L
Marca: SMC
Prezzo: 248.19 €
Tempi di consegna: 4 giorni
Dati Tecnici:
Cylinder Dia.: 20 Ø
Corsa: 20 mm
Rod Tip Shape: Female Thread
Support Type: [Foro passante, maschiatura sui due lati (comune)] Foro passante ・Maschiatura sui due lati comune (standard)
Opzioni corpo: No (Standard)
(i)Nota
- Refer to the catalog for details on product specifications.
- The products shown in the image are representative. CAD data is not supported for some model numbers.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
MK2TB20-20L
Rotary Clamp Cylinder, Double Guide Type, MK2T Series Details
Rotary Clamp Cylinder, Double Guide Type, MK2T Series: product images
Rotary Clamp Cylinder, Double Guide Type, MK2T Series Specification
Model Number Notation
Model number example
Applicable Auto Switches
| Type | Special functions | Lead wire electrical entry | Indicator light | Wiring (output) | Load voltage | ||
|---|---|---|---|---|---|---|---|
| DC | AC | ||||||
| Solid state auto switch | - | Grommet | Yes | 3-wire (NPN) | 24 V | 5 V, 12 V | - |
| 3-wire (PNP) | |||||||
| 2-wire | 12 V | ||||||
| Connector | |||||||
| Diagnostic indication (2-color indicator) | Grommet | 3-wire (NPN) | 5 V, 12 V | ||||
| 3-wire (PNP) | |||||||
| 2-wire | 12 V | ||||||
| Improved water resistance product (2-color indicator) | 3-wire (NPN) | 5 V, 12 V | |||||
| 3-wire (PNP) | |||||||
| 2-wire | 12 V | ||||||
| With diagnostic output (2-color indicator) | 4-wire | 5 V, 12 V | |||||
| Strong magnetic field resistant (2-color indicator) | 2-wire (non-polarized) | - | |||||
| Reed switch | - | Grommet | Yes | 3-wire (NPN equivalent) | - | 5 V | - |
| 2-wire | - | 200 V | |||||
| 24 V | 12 V | 100 V | |||||
| NA | 5 V, 12 V | 100 V or less | |||||
| Connector | Yes | 12 V | - | ||||
| NA | 5 V, 12 V | 24 V or less | |||||
| Diagnostic indication (2-color indicator) | Grommet | Yes | - | - | |||
| Type | Auto switch model number | Lead wire length (m) | Pre-wired connector | Applicable load | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Perpendicular | In-line | 0.5 (Nil) | 1 (M) | 3 (L) | 5 (Z) | None (N) | |||||||
| ø20 (diameter 20 mm), ø25 (diameter 25 mm) | ø32 to 63 (diameter 32 to 63 mm) | ø20 (diameter 20 mm) | ø25 (diameter 25 mm) | ø32 to 63 (diameter 32 to 63 mm) | |||||||||
| Solid state auto switch | M9NV | M9N | ● | - | ● | ○ | - | ○ | IC circuit | Relay, PLC | |||
| M9PV | M9P | ● | - | ● | ○ | - | ○ | ||||||
| M9BV | M9B | ● | - | ● | ○ | - | ○ | - | |||||
| - | J79C | - | ● | - | ● | ● | ● | - | |||||
| M9NWV | M9NW | ● | ● | ● | ○ | - | ○ | IC circuit | |||||
| M9PWV | M9PW | ● | ● | ● | ○ | - | ○ | ||||||
| M9BWV | M9BW | ● | ● | ● | ○ | - | ○ | - | |||||
| *1M9NAV | *1M9NA | ○ | ○ | ● | ○ | - | ○ | IC circuit | |||||
| *1M9PAV | *1M9PA | ○ | ○ | ● | ○ | - | ○ | ||||||
| *1M9BAV | *1M9BA | ○ | ○ | ● | ○ | - | ○ | - | |||||
| - | - | F79F | ● | - | ● | ○ | - | ○ | IC circuit | ||||
| - | - | ***P3DWA | ● | - | ● | ● | - | ● | - | ||||
| - | - | **P4DW | - | - | ● | ● | - | ○ | |||||
| Reed switch | A96V | A96 | ● | - | ● | - | - | - | IC circuit | - | |||
| - | A72 | - | A72H | ● | - | ● | - | - | - | - | Relay, PLC | ||
| *2A93V | A93 | ● | ● | ● | ● | - | - | ||||||
| - | A90 | ● | - | ● | - | - | - | IC circuit | |||||
| - | A73C | - | ● | - | ● | ● | ● | - | - | ||||
| - | - | ● | - | ● | ● | ● | - | IC circuit | |||||
| - | A79W | - | ● | - | ● | - | - | - | - | ||||
- *1 The auto switches with improved water resistance can be mounted on the above models, but the water-resistance of the model cannot be guaranteed. Check with the manufacturer regarding water-resistant types for the above model numbers.
- *2 The 1‑m type lead wire is only applicable to the D-A93.
- *Solid state auto switches marked with 〇 are made upon receipt of order.
**The D-P4DW type supports ø40 to 63 (diameter 40 to 63 mm).
**Only the D-P4DW type is assembled at the time of shipment.
***The D-P3DWA□ type supports ø25 to 63 (diameter 25 to 63 mm).
- *Aside from those models listed above, there are other applicable auto switches.
- *Auto switches are shipped together (but not assembled).
Specifications
| Tube internal diameter (mm) | 20 | 25 | 32 | 40 | 50 | 63 |
|---|---|---|---|---|---|---|
| Operating method | Double acting type | |||||
| Rotation angle Note 1) | 90° ±5° | |||||
| Rotary directionNote 2) | Left, right | |||||
| Rotary stroke (mm) | 19 | 29 | 33 | |||
| Clamp stroke (mm) | 10, 20 | 20, 50 | ||||
| Theoretical clamping force (N) Note 3) | 100 | 185 | 300 | 525 | 825 | 1,300 |
| Applicable fluids | Air | |||||
| Proof pressure | 1.5 MPa | |||||
| Operating pressure range | 0.1 to 1 MPa | |||||
| Ambient and working fluid temperature | Without auto switch: -10 to 70°C (no freezing) | |||||
| With auto switch: -10 to 60°C (no freezing) | ||||||
| Lubrication | Not required | |||||
| Piping connection port diameter | M5 ×; 0.8 | Rc1/8, NPT1/8, G1/8 | Rc1/4, NPT1/4, G1/4 | |||
| Mounting | Through hole / Both ends tapped common, head flange | |||||
| Cushioning | Rubber cushion | |||||
| Stroke length tolerance | +1.0 0 | |||||
| Operating piston speed | 50 to 200 mm/s | |||||
| Non-rotating accuracy (clamp part) | ±1.0° | ±0.5° | ||||
Note 1) Refer to the rotary angle diagram.
Note 2) Direction of rotation viewed from the rod end when the piston rod is retracted
Note 3) Pressure: 0.5 MPa
Rotary angle diagram
Rotary angle diagram
Theoretical Output List
(Unit: N)
| Tube internal diameter (mm) | Rod diameter (mm) | Operating direction | Piston area (cm2) | Operating pressure (MPa) | |||
|---|---|---|---|---|---|---|---|
| 0.3 | 0.5 | 0.7 | 1.0 | ||||
| 20 | 12 | R | 2 | 60.8 | 100 | 139 | 200 |
| H | 3 | 90.2 | 149 | 208 | 298 | ||
| 25 | 12 | R | 3.7 | 112 | 185 | 258 | 370 |
| H | 4.9 | 149 | 245 | 341 | 490 | ||
| 32 | 16 | R | 6 | 182 | 300 | 418 | 600 |
| H | 8 | 243 | 400 | 557 | 800 | ||
| 40 | 16 | R | 10.5 | 319 | 525 | 731 | 1,050 |
| H | 12.5 | 380 | 625 | 870 | 1,250 | ||
| 50 | 20 | R | 16.5 | 502 | 825 | 1,149 | 1,648 |
| H | 19.6 | 596 | 980 | 1,365 | 1,961 | ||
| 63 | 25 | R | 26 | 780 | 1,300 | 1,820 | 2,600 |
| H | 31.2 | 948 | 1,560 | 2,172 | 3,121 | ||
Note) Theoretical output (N) = pressure (MPa) ×; piston area (cm2) ×; 100.
Operating direction - R: Rod end (clamp) / H: Head end (unclamp)
Weight List / Through-Hole Mounting
(Unit: g)
| Clamp stroke (mm) | Tube internal diameter (mm) | |||||
|---|---|---|---|---|---|---|
| 20 | 25 | 32 | 40 | 50 | 63 | |
| 10 | 367 | 448 | 806 | 1,008 | - | - |
| 20 | 433 | 520 | 914 | 1,127 | 2,049 | 2,609 |
| 50 | - | - | - | - | 2,672 | 3,354 |
Additional Weight List
(Unit: g)
| Tube internal diameter (mm) | 20 | 25 | 32 | 40 | 50 | 63 |
|---|---|---|---|---|---|---|
| Arm included | 100 | 100 | 200 | 200 | 350 | 600 |
| Head End Flange Type (Including Mounting Bolt) | 133 | 153 | 166 | 198 | 345 | 531 |
Option Part Numbers / Arm
| Tube internal diameter (mm) | Model number | Accessories |
|---|---|---|
| 20 | MK-A020Z | Clamp bolt Hexagon socket head bolt Hexagon nut Spring washer |
| 25 | ||
| 32 | MK-A032Z | |
| 40 | ||
| 50 | MK-A050Z | |
| 63 | MK2T-A063 |
Mounting Bracket Part Number / Flange
| Tube internal diameter (mm) | Model number | Accessories |
|---|---|---|
| 20 | CQS-F020 | Hex socket head bolt |
| 25 | CQS-F025 | |
| 32 | MK2T-F032 | |
| 40 | MK2T-F040 | |
| 50 | MK2T-F050 | |
| 63 | MK2T-F063 |
Structural Drawings
MK2T□20 to MK2T□63: structural drawings
Component Parts
| Number | Part name | Materials | Additional notes |
|---|---|---|---|
| 1 | Rod cover | Structural steel | - |
| 2 | Cylinder tube | Aluminum alloy | - |
| 3 | Piston | Aluminum alloy | - |
| 4 | Bushing | Oil-impregnated sintered alloy | ø20 (diameter 20 mm), ø25 (diameter 25 mm) |
| Bronze casting | ø32 to 63 (diameter 32 to 63 mm) | ||
| 5 | Guide shaft | Stainless steel | ø20 (diameter 20 mm), ø25 (diameter 25 mm) |
| Structural steel | ø32 to 63 (diameter 32 to 63 mm) | ||
| 6 | Guide roller | Structural steel | - |
| 7 | Retaining ring | Special use steel | ø20 (diameter 20 mm), ø25 (diameter 25 mm) |
| ø32 to 63 (diameter 32 to 63 mm) | |||
| 8 | Piston rod | Stainless steel | ø20 (diameter 20 mm), ø25 (diameter 25 mm) |
| Structural steel | ø32 to 63 (diameter 32 to 63 mm) | ||
| 9 | Dampers | Urethane | - |
| 10 | Seal retainer | Aluminum alloy | - |
| 11 | Magnet | - | - |
| 12 | Key | Structural steel | - |
| 13 | Arm | Structural steel | - |
| 14 | Clamp bolt | Structural steel | - |
| 15 | Hex nut | Structural steel | - |
| 16 | Hex socket head bolt | Structural steel | - |
| 17 | Spring washer | Steel wire | - |
| 18 | Flange | Structural steel | - |
| 19 | Gasket | NBR | - |
| 20 | Coil scraper | Bronze | - |
| 21 | Piston seal | NBR | - |
| 22 | Rod seal | NBR | - |
| 23 | Wear ring | Resin | - |
| 24 | Bottom plate | Aluminum alloy | - |
| 25 | Retaining ring | Special use steel | - |
| 26 | Hex socket head bolt (with SW) | Structural steel | - |
| Washer | Stainless steel | ø25 (diameter 25 mm), ø32 (diameter 32 mm) only | |
| Hex socket head bolt | Structural steel | - |
Replacement Parts / Seal Kit
| Tube internal diameter (mm) | 20 | 25 | 32 | 40 | 50 | 63 |
|---|---|---|---|---|---|---|
| Order number | MK2T20-PS | MK2T25-PS | MK2T32-PS | MK2T40-PS | MK2T50-PS | MK2T63-PS |
| Contents | Set of above numbers (19), (20), (21), (22) | |||||
- *Seal kit is a set of (19), (20), (21), (22). Order the seal kit based on each bore size.
Rotary Clamp Cylinder, Double Guide Type, MK2T Series: Dimensions Examples
(Unit: mm)
Outline dimensional drawing: ø20 (diameter 20 mm), ø25 (diameter 25 mm): dimensional drawing (1)
(Unit: mm)
Outline dimensional drawing: ø20 (diameter 20 mm), ø25 (diameter 25 mm): dimensional drawing (2)
Head End Flange Type
| Model | A | B | C |
|---|---|---|---|
| MK2TG20 | 60 | 39 | 48 |
| MK2TG25 | 64 | 42 | 52 |
Through-Hole / Both Ends Tapped Common (Standard)
| Tube internal diameter | A | øB | C | Clamp stroke: 10 mm | Clamp stroke: 20 mm | ||||
|---|---|---|---|---|---|---|---|---|---|
| Q | R | S | Q | R | S | ||||
| 20 | 36 | 47 | 25.5 | 116.5 | 110.5 | 59 | 136.5 | 130.5 | 69 |
| 25 | 40 | 52 | 28 | 119 | 113 | 59 | 139 | 133 | 69 |
Codice componente
|
|---|
| MK2TB20-20L |
| Codice componente | Relativo a |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Cylinder Dia. (Ø) | Corsa (mm) | Rod Tip Shape | Support Type | Opzioni corpo | Max. Pressure (MPa) | Operating Temperature Range (℃) | Clamping Force (kN) | Rotating Direction | Auto Switch | Lead Wire Length (m) | Number of Switches | Port Screw Type | Specifiche su ordinazione | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
248.19 € | 1 | 4 giorni | 20 | 20 | Female Thread | [Foro passante, maschiatura sui due lati (comune)] Foro passante ・Maschiatura sui due lati comune (standard) | No (Standard) | 1 | -10～70 | 0.1 | Sinistra | Senza interruttore | - | - | Filettatura M | Assente |
Loading...
Informazioni di base
| Operation Method | Move Turning | Rod Motion | Double Acting Piece Rod | Rotation Angle θ | 90°±5° |
|---|---|---|---|---|---|
| Specifications | Magnete incorporato |
Si trova sulla pagina di MK2T, Cilindro di bloccaggio con staffa rotante, Modello a doppia guida, il codice articolo è il seguente: MK2TB20-20L.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto MK2TB20-20L.
Configura
Proprietà di base
-
Lead Wire Length(m)
- 0,5 (tipo SC)
- 0,5 (connettore a spina M8 a 3 pin)
- 0,5 [connettore a spina cavo A M12 a 4 pin (chiave normale)]
- 0.5
- 1
- 1 (connettore a spina M8 a 3 pin)
- 3
- 5
-
Number of Switches
-
Tipo
- MK2T
- MK2TB
- MK2TG
-
Cylinder Dia.(Ø)
-
Corsa(mm)
-
Rod Tip Shape
- Female Thread
- Altro
-
Support Type
- Head side flange
- Foro passante, maschiatura sui due lati (comune)
-
Opzioni corpo
- No (Standard)
- Con braccio
-
Max. Pressure(MPa)
-
Clamping Force(kN)
-
Rotating Direction
- Destra
- Sinistra
-
Auto Switch
-
Port Screw Type
- Filettatura M
- G
- NPT
- Rc
-
Specifiche su ordinazione
- Raschiatore a bobina antiresidui, grasso per saldatura, asta del pistone: S45C
- Raschiatore a bobina antiresidui, paraolio, grasso per saldatura, asta del pistone: S45C
- Assente
- Lato testa con foro per perno
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 4 giorni o meno
- 26 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| MK2TB20-10L-M9BWL |
| MK2TB20-10L-M9PVL |
| MK2TB20-10L-M9PWV |
| MK2TB20-20L-A93L |
| MK2TB20-20L-M9B |
| MK2TB20-20L-M9NL |
| Codice componente | Relativo a | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | Cylinder Dia. (Ø) | Corsa (mm) | Rod Tip Shape | Support Type | Opzioni corpo | Max. Pressure (MPa) | Operating Temperature Range (℃) | Clamping Force (kN) | Rotating Direction | Auto Switch | Lead Wire Length (m) | Number of Switches | Port Screw Type | Specifiche su ordinazione |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| - | 314.68 € | 1 | 26 giorni | 20 | 10 | Female Thread | [Foro passante, maschiatura sui due lati (comune)] Foro passante ・Maschiatura sui due lati comune (standard) | No (Standard) | 1 | -10～ 60 | 0.1 | Sinistra | M9BW | 3 | 2 | Filettatura M | Assente | ||
| - | 329.52 € | 1 | 26 giorni | 20 | 10 | Female Thread | [Foro passante, maschiatura sui due lati (comune)] Foro passante ・Maschiatura sui due lati comune (standard) | No (Standard) | 1 | -10～ 60 | 0.1 | Sinistra | M9PV | 3 | 2 | Filettatura M | Assente | ||
| - | 314.68 € | 1 | 26 giorni | 20 | 10 | Female Thread | [Foro passante, maschiatura sui due lati (comune)] Foro passante ・Maschiatura sui due lati comune (standard) | No (Standard) | 1 | -10～ 60 | 0.1 | Sinistra | M9PWV | 0.5 | 2 | Filettatura M | Assente | ||
| - | 294.48 € | 1 | 26 giorni | 20 | 20 | Female Thread | [Foro passante, maschiatura sui due lati (comune)] Foro passante ・Maschiatura sui due lati comune (standard) | No (Standard) | 1 | -10～ 60 | 0.1 | Sinistra | A93 | 3 | 2 | Filettatura M | Assente | ||
310.21 € | 1 | 26 giorni | 20 | 20 | Female Thread | [Foro passante, maschiatura sui due lati (comune)] Foro passante ・Maschiatura sui due lati comune (standard) | No (Standard) | 1 | -10～ 60 | 0.1 | Sinistra | M9B | 0.5 | 2 | Filettatura M | Assente | |||
| - | 319.52 € | 1 | 26 giorni | 20 | 20 | Female Thread | [Foro passante, maschiatura sui due lati (comune)] Foro passante ・Maschiatura sui due lati comune (standard) | No (Standard) | 1 | -10～ 60 | 0.1 | Sinistra | M9N | 3 | 2 | Filettatura M | Assente |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.