• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Attuatori Attuatore lineare / elettrico Cursore con trasmissione a cinghia serie LEFB Motore passo-passo / servomotore (LEFB25T-600-S3AP1D)

Attuatori Attuatore lineare / elettrico Cursore con trasmissione a cinghia serie LEFB Motore passo-passo / servomotore LEFB25T-600-S3AP1D

SMC

SMC

Dettagli del prodotto:

Codice articolo del costruttore: LEFB25T-600-S3AP1D

Marca: SMC

Prezzo: 1,478.04 €

Tempi di consegna: 26 giorni


Dati Tecnici:

Stroke: 600 mm

Max. Transportable Mass Range (Horizontal): 2.1–5.0 kg

Max. Transportable Mass (Horizontal): 5 kg

Lead: 48 mm

I/O Module: PNP


(i)Nota

  • Le pagine Web per i prodotti attualmente privi di singole pagine su questo sito verranno rilasciate ad hoc.
  • Le immagini dei prodotti possono essere solo immagini rappresentative. Fare riferimento al catalogo del produttore per i dettagli sulla forma.
  • I dati CAD non sono disponibili per alcuni numeri di modello.

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

LEFB25T-600-S3AP1D

Electric Actuator, Slider Type, Belt Drive LEFB Series Specifications

Electric Actuator, Slider Type, Belt Drive LEFB Series external appearance

Electric Actuator, Slider Type, Belt Drive LEFB Series external appearance

Specifications / Step Motor (24‑V DC Servo)

Model LEFB16 LEFB25 LEFB32
Actuator Specifications Stroke [mm] Note 1: 300, 500, 600, 700
800, 900, 1,000 		300, 500, 600, 700, 800, 900
1,000, 1,200, 1,500, 1,800, 2,000 		300, 500, 600, 700, 800, 900
1,000, 1,200, 1,500, 1,800, 2,000
Work Load [kg] Note 2: Horizontal LECP6/LECP1/LECPMJ JXCE1/91/P1/D1 1 10 19
LECPA 1 5 14
Speed [mm/s] Note 2: 48 to 1,100 48 to 1,400 48 to 1,500
Maximum Acceleration/Deceleration [mm/s2] 3,000
Positioning Repeatability [mm] ±0.08
Lost Motion [mm] Note 3: 0.1 or less
Lead [mm] 48 48 48
Impact/Vibration Resistance [m/s2] Note 4: 50/20
Actuation Type Belt
Guide Type Linear guide
Operating Temperature Range [°C] 5 to 40
Operating Humidity Range [%RH] 90 or less (no condensation)
Electrical Specifications Motor Size □28 □42 □56.4
Motor type Step motor (24‑V DC servo)
Encoder Incremental A/B phase (800 pulses/rotation)
Rated Voltage [V] 24 DC ±10%
Power Consumption [W] Note 5: 24 32 52
Standby Power Consumption When Operating [W] Note 6: 18 16 44
Maximum Instantaneous Power Consumption [W] Note 7: 51 60 127
Lock Specifications Type Note 8: Non-excitation operation (non-magnetizing lock)
Holding Force [N] 4 19 36
Power Consumption [W] Note 9: 2.9 5 5
Rated Voltage [V] 24 DC ±10%

Note 1: Non-standard strokes are manufactured as custom orders.
Note 2: The speed changes according to the controller/driver type and work load. See p. 41 of the SMC catalog ("Speed−Work Load Graph (Guide)") for more details. Furthermore, if the cable length exceeds 5 m, then it will decrease by up to 10% for each 5 m. Cannot be used vertically.
Note 3: A reference value for correcting an error in reciprocal operation.
Note 4: Impact resistance: No malfunction occurred when the actuator was tested with a drop tester in both an axial direction and a perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Vibration resistance: No malfunction occurred in a test ranging between 45 and 2,000 Hz (1 sweep), performed in both an axial direction and a perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Note 5: The power consumption (including the controller) is for when the actuator is operating.
Note 6: The standby power consumption when operating (including the controller) is for when the actuator is stopped in the set position during operation.
Note 7: The maximum instantaneous power consumption (including the controller) is for when the actuator is operating. This value can be used for selecting the power supply capacity.
Note 8: With lock only.
Note 9: For an actuator with a lock, add the power consumption for the lock.

Specifications / Servo Motor (24 V DC)

Model LEFB16A LEFB25A
Actuator Specifications Stroke [mm] Note 1: 300, 500, 600, 700
800, 900, 1,000 		300, 500, 600, 700, 800, 900
1,000, 1,200, 1,500, 1,800, 2,000
Work Load [kg] Note 2: Horizontal 1 2
Speed [mm/s] Note 2: 5 to 2,000 5 to 2,000
Maximum Acceleration/Deceleration [mm/s2] 3,000
Positioning Repeatability [mm] ±0.08
Lost Motion [mm] Note 3: 0.1 or less
Lead [mm] 48 48
Impact/Vibration Resistance [m/s2] Note 4: 50/20
Actuation Type Belt
Guide Type Linear guide
Operating Temperature Range [°C] 5 to 40
Operating Humidity Range [%RH] 90 or less (no condensation)
Electrical Specifications Motor Size □28 □42
Motor Output [W] 30 36
Motor type Servo motor (24 V DC)
Encoder Incremental A/B (800 pulses/rotation) / Z phase
Rated Voltage [V] 24 DC ±10%
Power Consumption [W] Note 5: 78 69
Standby Power Consumption When Operating [W] Note 6: Horizontal 4 Horizontal 5
Maximum Instantaneous Power Consumption [W] Note 7: 87 120
Lock Specifications Type Note 8: Non-excitation operation (non-magnetizing lock)
Holding Force [N] 4 19
Power Consumption [W] Note 9: 2.9 5
Rated Voltage [V] 24 DC ±10%

Note 1: Non-standard strokes are manufactured as custom orders.
Note 2: See p. 42 of the SMC catalog ("Speed−Work Load Graph (Guide)") for more details. Furthermore, if the cable length exceeds 5 m, then it will decrease by up to 10% for each 5 m.
Note 3: A reference value for correcting an error in reciprocal operation.
Note 4: Impact resistance: No malfunction occurred when the actuator was tested with a drop tester in both an axial direction and a perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Vibration resistance: No malfunction occurred in a test ranging between 45 and 2,000 Hz (1 sweep), performed in both an axial direction and a perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Note 5: The power consumption (including the controller) is for when the actuator is operating.
Note 6: The standby power consumption when operating (including the controller) is for when the actuator is stopped in the set position while operating with maximum load.
Note 7: The maximum instantaneous power consumption (including the controller) is for when the actuator is operating. This value can be used for selecting the power supply capacity.
Note 8: With lock only.
Note 9: For an actuator with a lock, add the power consumption for the lock.

Dimensions / Belt Drive

 

(Units: mm)

 

LEFB16 dimensional drawing

LEFB16 dimensional drawing

LEFB16 positioning pin hole (Note 5) (Optional): Body bottom surface dimensions

LEFB16 positioning pin hole (Note 5) (Optional): Body bottom surface dimensions

  • LEFB16□T-300□/L: 495.5 mm, A: 306 mm, B: 435 mm, n: 6 mm, D: 2 mm, E: 300 mm, G: 280 mm
  • LEFB16□T-500□/L: 695.5 mm, A: 506 mm, B: 635 mm, n: 10 mm, D: 4 mm, E: 600 mm, G: 580 mm
  • LEFB16□T-600□/L: 795.5 mm, A: 606 mm, B: 735 mm, n: 10 mm, D: 4 mm, E: 600 mm, G: 580 mm
  • LEFB16□T-700□/L: 895.5 mm, A: 706 mm, B: 835 mm, n: 12 mm, D: 5 mm, E: 750 mm, G: 730 mm
  • LEFB16□T-800□/L: 995.5 mm, A: 806 mm, B: 935 mm, n: 14 mm, D: 6 mm, E: 900 mm, G: 880 mm
  • LEFB16□T-900□/L: 1,095.5 mm, A: 906 mm, B: 1,035 mm, n: 14 mm, D: 6 mm, E: 900 mm, G: 880 mm
  • LEFB16□T-1000□/L: 1,195.5 mm, A: 1,006 mm, B: 1,135 mm, n: 16 mm, D: 7 mm, E: 1,050 mm, G: 1,030 mm

Note 1: Because of the rounded chamfering, when mounting the actuator using the body mounting reference plane, set the height of the opposite surface or pin to be at least 2 mm or more. (Recommended height: 5 mm)
Note 2: Distance within which the table can move when it returns to origin, etc. Make sure any workpiece mounted on the table does not interfere with the workpieces and equipment, etc., around the table.
Note 3: Position after return to origin.
Note 4: Values within [ ] are for when the direction of return to origin has been changed.
Note 5: When using the body bottom positioning pin holes, do not use the housing B bottom pin hole.

Diagram

LEFB Series diagram 1

LEFB Series diagram 1

LEFB Series diagram 2

LEFB Series diagram 2

Number Part Name Material Note
1 Body Aluminum alloy Anodized
2 Rail Guide - -
3 Belt - -
4 Belt Holder Carbon steel Chromated
5 Belt Stopper Aluminum alloy Anodized
6 Table Aluminum alloy Anodized
7 Blanking Plate Aluminum alloy Anodized
8 Seal Band Holder Synthetic resin -
9 Housing A Aluminum diecast Coating
10 Pulley Holder Aluminum alloy -
11 Pulley Shaft Stainless steel -
12 End Pulley Aluminum alloy Anodized
13 Motor Pulley Aluminum alloy Anodized
14 Motor Mount Aluminum alloy Anodized
15 Motor Cover Aluminum alloy Anodized
16 End Cover Aluminum alloy Anodized
17 Band Stopper Stainless steel -
18 Motor - -
19 Rubber Bushing NBR -
20 Stopper Aluminum alloy -
21 Dust Seal Band Stainless steel -
22 Bearing - -
23 Bearing - -
24 Tension Adjustment Cap Screw Chrome molybdenum steel Chromated
25 Pulley Retaining Screw Chrome molybdenum steel Chromated

Notes

  • *Do not apply load in excess of the specification limits. Select a suitable actuator by work load and allowable moment. If the product is used outside of the specification limits, the unbalanced load applied to the guide will be excessive and have adverse effects, such as creating play on the guide, degrading accuracy and shortening the lifespan of the product.
  • *Do not use the product in applications where excessive external force or impact force is applied to it. Doing so can cause the product to malfunction.
  • *Refer to the SMC catalog for product information other than what is detailed above.
  • *The product image is a representative image only.
Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
LEFB25T-600-S3AP1D
Codice componenteRelativo a
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Stroke
(mm) 		Max. Transportable Mass Range (Horizontal)
(kg) 		Max. Transportable Mass (Horizontal)
(kg) 		Lead
(mm) 		I/O Module Table Width W1
(mm) 		Brake Table Length L1
(mm) 		Maximum Velocity
(mm/sec) 		Misura Tipo motore Opzioni motore Tipo attuatore / cavo Lunghezza cavo attuatore
(m) 		Tipo controller / driver Lunghezza cavo I/O / spina per comunicazioni
(m) 		Metodi di montaggio controller / driver Applicazione di grasso (parte fascia di tenuta) Staffa di montaggio interruttore automatico Foro perno di posizionamento
-

1,478.04 €

1 26 giorni 6002.1–5.0548PNP50Non in dotazione1023,00025Motore passo-passo (servo 24-V DC)Senza bloccoCavo standard3LECPA (tipo di ingresso a Legumi)1.5Tipo montaggio su guida DIN---

Loading...

  1. 1
 

Informazioni di base

Main Body, Peripheral Components Corpo principale Type Cursori Drive Method Cinghie
Guide In dotazione Input Power Supply 24 V DC Position Detection Incrementale
Noise Filters Non in dotazione Ambiente d'esercizio Standard Positioning Repeatability(µm) ±80

Si trova sulla pagina di Attuatori Attuatore lineare / elettrico Cursore con trasmissione a cinghia serie LEFB Motore passo-passo / servomotore, il codice articolo è il seguente: LEFB25T-600-S3AP1D.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto LEFB25T-600-S3AP1D.

Configura

Ripristina

1Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Applicazione di grasso (parte fascia di tenuta)

    • Assente (Specifiche dei cilindro/rullo)
    • Sì

    Ripristina

  • Staffa di montaggio interruttore automatico

    • 1 pz incluso (Includere)
    • Nessuno

    Ripristina

  • Foro perno di posizionamento

    • Fondo dell’alloggio B

    Ripristina

  • Tipo

    • LEFB

    Ripristina

  • Stroke(mm)

    • 1,000
    • 1,200
    • 1,500
    • 1,800
    • 2,000
    • 300
    • 500
    • 600
    • 700
    • 800
    • 900

    Ripristina

  • Max. Transportable Mass Range (Horizontal)(kg)

    • 0–2.0
    • 2.1–5.0
    • 5.1–10.0
    • 10,1 - 20,0

    Ripristina

  • Max. Transportable Mass (Horizontal)(kg)

    • 1
    • 2
    • 5
    • 10
    • 14
    • 19

    Ripristina

  • Lead(mm)

    • 48
    • Equivalente a 48

    Ripristina

  • I/O Module

    • NPN
    • PNP
    • DeviceNet
    • Ethernet
    • Non in dotazione
    • EtherCAT
    • IO-Link
    • PROFINET

    Ripristina

  • Table Width W1(mm)

    • 39,4
    • 50
    • 60

    Ripristina

  • Brake

    • Non in dotazione
    • In dotazione

    Ripristina

  • Table Length L1(mm)

    • 72
    • 102
    • 122

    Ripristina

  • Maximum Velocity(mm/sec)

    • 1,500
    • 3,000
    • 1100
    • 1400
    • 2000

    Ripristina

  • Misura

    • 16
    • 25
    • 32

    Ripristina

  • Tipo motore

    • Motore passo-passo (servo 24-V DC)
    • Servomotore (24 V DC)

    Ripristina

  • Opzioni motore

    • Senza blocco
    • With lock

    Ripristina

  • Tipo attuatore / cavo

    • Cavo robotico (cavo resistente alla flessione)
    • Cavo standard
    • Without cable

    Ripristina

  • Lunghezza cavo attuatore(m)

    • 1.5
    • 3
    • 5
    • 8
    • 10
    • 15
    • 20
    • Without cable

    Ripristina

  • Tipo controller / driver

    • JXCD1 (DeviceNet (TM) ingresso diretto)
    • JXCE1 (ingresso diretto EtherCAT)
    • JXCL1 (tipo di ingresso diretto IO-link)
    • JXCP1 (ingresso diretto PROFINET)
    • LECP1 (tipo senza programma)
    • LECA6 (tipo di ingresso dati passo)
    • LECP6 / LECA6 (tipo di ingresso dati passo)
    • LECP6/LECA6, PNP, step data input type
    • JXC91 (Ingresso diretto Ethernet/IP)
    • LECPA (tipo di ingresso a Legumi)
    • Nessuno

    Ripristina

  • Lunghezza cavo I/O / spina per comunicazioni(m)

    • 1.5
    • 3
    • 5
    • Senza cavo (senza connettore di comunicazione)
    • Senza connettore spina

    Ripristina

  • Metodi di montaggio controller / driver

    • Montaggio a vite
    • Tipo montaggio su guida DIN

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • 4 giorni o meno
    • 21 giorni o meno
    • 26 giorni o meno
    • 98 giorni o meno

    Ripristina

Attributi opzionali

Tipologia prodotto

Codice componente
LEFB16AT-1000-R56P5D
LEFB16AT-1000B-R36N3D
LEFB16AT-1000B-R56P1D
LEFB25T-600-S3CP18
LEFB25T-600-S5
LEFB25T-600B
Codice componenteRelativo a Prezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?		Stroke
(mm) 		Max. Transportable Mass Range (Horizontal)
(kg) 		Max. Transportable Mass (Horizontal)
(kg) 		Lead
(mm) 		I/O Module Table Width W1
(mm) 		Brake Table Length L1
(mm) 		Maximum Velocity
(mm/sec) 		Misura Tipo motore Opzioni motore Tipo attuatore / cavo Lunghezza cavo attuatore
(m) 		Tipo controller / driver Lunghezza cavo I/O / spina per comunicazioni
(m) 		Metodi di montaggio controller / driver Applicazione di grasso (parte fascia di tenuta) Staffa di montaggio interruttore automatico Foro perno di posizionamento
-

1,943.54 €

1 26 giorni 1,0000–2.0148PNP39,4Non in dotazione723,00016Servomotore (24 V DC)Senza bloccoCavo robotico (cavo resistente alla flessione)5LECP6/LECA6, PNP, step data input type5Tipo montaggio su guida DIN---
-

2,148.96 €

1 26 giorni 1,0000–2.0148NPN39,4Non in dotazione723,00016Servomotore (24 V DC)With lockCavo robotico (cavo resistente alla flessione)3LECP6/LECA6, PNP, step data input type3Tipo montaggio su guida DIN---
-

2,221.83 €

1 26 giorni 1,0000–2.0148PNP39,4Non in dotazione723,00016Servomotore (24 V DC)With lockCavo robotico (cavo resistente alla flessione)5LECP6/LECA6, PNP, step data input type1.5Tipo montaggio su guida DIN---

Scheda dati

1,931.74 €

1 26 giorni 6005.1–10.010Equivalente a 48PROFINET50Non in dotazione102140025Motore passo-passo (servo 24-V DC)Senza bloccoCavo standard3JXCP1 (ingresso diretto PROFINET)Senza connettore spinaTipo montaggio su guida DINSìNessunoFondo dell’alloggio B

Scheda dati

1,224.67 €

1 26 giorni 6005.1–10.01048Non in dotazione50Non in dotazione1023,00025Motore passo-passo (servo 24-V DC)Senza bloccoCavo standard5NessunoSenza cavo (senza connettore di comunicazione)Montaggio a vite---
-

1,353.53 €

1 26 giorni 6005.1–10.01048Non in dotazione50Non in dotazione1023,00025Motore passo-passo (servo 24-V DC)With lockWithout cableWithout cableNessunoSenza cavo (senza connettore di comunicazione)Montaggio a vite---

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.