Tubazione in nylon serie T / TIA (T0806B-100)

Tubazione in nylon serie T / TIA T0806B-100

Dettagli del prodotto:

Codice articolo del costruttore: T0806B-100

Marca: SMC

Prezzo: 121.29

Tempi di consegna: Stesso giorno


Dati Tecnici:

D.E. D: 8 Ø

D.E. [Distinzione]: Fino a 8

D.I. d: 6 Ø

D.I. [Distinzione]: Fino a 6

Colore: [Trasparente (colori diversi dal bianco inclusi)] Trasparente (inclusi articoli colorati)


(i)Nota

  • The maximum operating pressure values listed are at 20°C or less. See the catalog for details.
  • For specifications and details, please refer to the catalog.
  • Product pictures are representations.
  • The last digits of the product codes indicate the length of the tubings.

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

T0806B-100

Specifications of Nylon Tubing T/TIA Series

Appearance of Nylon Tubing T/TIA Series

Appearance of Nylon Tubing T/TIA Series

Maximum operating pressure

Maximum operating pressure

- Tubing Size
Metric size (T series) Inch size (TIA series)
Nominal T0425 T0403 T0604 T0645 T0806 T1075 T1209 T1613 TIA01 TIA05 TIA07 TIA11 TIA13
Outer diameter (mm) 4 4 6 6 8 10 12 16 3.18 4.76 6.35 9.53 12.7
Inner diameter (mm) 2.5 3 4 4.5 6 7.5 9 13 2.18 3.48 4.57 6.99 9.56

List Of Colors

  • Black (B)
  • White (W)
  • Red (R)
  • Blue (BU)
  • Yellow (Y)
  • Green (G)

Specifications

Fluid Air, water
Maximum operating pressureNote 1)MPa 20°C or less 3.3 2.0 3.0 2.0 2.0 2.0 2.0 1.6 2.3 2.3 2.3 2.3 2.3
40°C 2.3 1.4 2.1 1.4 1.4 1.4 1.4 1.1 1.6 1.6 1.6 1.6 1.6
60°C 1.65 1.0 1.5 1.0 1.0 1.0 1.0 0.8 1.15 1.15 1.15 1.15 1.15
80°C 1.35 0.8 1.25 0.8 0.8 0.8 0.8 0.65 0.95 0.95 0.95 0.95 0.95
100°C 1.2 0.75 1.1 0.75 0.75 0.75 0.75 0.6 0.85 0.85 0.85 0.85 1.85
Applicable fittingsNote 1) Note 2) One-touch fittings, insert fittings, self-align fittings, miniature fittings
Minimum bending radius mmNote 3) Minimum bending radius 13 20 24 30 40 50 60 100 15 25 30 50 65
Tube close bend radius (reference value) 10 15 18 23 30 40 45 75 12 20 23 40 48
Operating temperatureNote 1) -40 to +100°C, Water: 0 to +70℃ (No freezing)
Material Nylon 12

Note 1) Be sure to operate under the maximum operating pressure and maximum operating temperature conditions using the lower maximum operating specification of either the tubing or fittings.
Note 2) Mount an inner sleeve when using metal one-touch fittings in high-temperature environments of 60°C or more.
Use self-align fittings at a temperature of 60°C or less.
Note 3) The minimum bending radius is the representative value measured as shown in the figure on the left ("How to measure the minimum bending radius").

  • Use a tube above the recommended minimum bending radius.
  • The tubing may be bent if used under the recommended minimum bending radius. Therefore, refer to the refraction value and make sure that the tubing is not bent or flattened.
  • The tube close bend radius is not guaranteed. The value of 2R is a representative value measured with a bent or flattened tube using the method shown in the figure on the left.

How to measure the minimum bending radius

How to measure the minimum bending radius

How to measure the minimum bending radius

Bend the tubing into a U shape at a temperature of 20°C. Fix one end and close the loop gradually. Measure 2R when the deformed ratio of the tubing diameter at bending reaches 10%.

Made-To-Order Specifications

  • 100‑m reel: Metric size and inch size, except for ø16 (diameter 16 mm). Suffix "-X3" to the end of part number.
  • Longer length reel: Metric size. Suffix "-X3" to the end of part number.
  • 20‑m roll: Inch size. Suffix "-X4" to the end of part number.

* Please contact SMC for specifications in detail, dimensions, delivery and specifications other than those mentioned above.

Caution

  • 1. Applicable for general industrial water. Please consult with SMC if using other kinds of fluid. Also, the surge pressure must not exceed the maximum operating pressure. If the surge pressure exceeds the maximum operating pressure, it will result in damage to fittings and tubes.
  • 2. Please exercise caution when using this item in a clean room. There is a possibility of plasticizers and other materials precipitating on the tube surface and detracting from the cleanliness level of the room.

* See the manufacturer's catalog for safety information.

Codice componente
T0806B-100
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
D.E. D
(Ø)
D.E. [Distinzione] D.I. d
(Ø)
D.I. [Distinzione] Colore Min. raggio di curvatura
(mm)
Bundle winding length
(m)
Reel winding length
(m)
Applicable Tube Size Specifiche Pressione d'esercizio massima
(MPa)

121.29 €

1 Stesso giorno

Stock

8Fino a 86Fino a 6[Trasparente (colori diversi dal bianco inclusi)] Trasparente (inclusi articoli colorati)40100-Misura metricaProdotto standard2

Loading...

  1. 1

Informazioni di base

Tipo Dritto Uso servizio taglio NA Materiale Resina poliolefinica (standard UL-94, V-0 equivalente)
Liquido applicabile Acqua / Aria Ambiente d'esercizio Standard Temperatura d'esercizio(°C) -40 – +100, con acqua: 0 – +70 (senza congelamento)

Si trova sulla pagina di Tubazione in nylon serie T / TIA, il codice articolo è il seguente: T0806B-100.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto T0806B-100.

Tipologia prodotto

Codice componente
T0425B-20
T0425B-500-X3
T0425BU-100-X3
T0806B-100-X3
T0806B-20
T0806B-200-X3
Codice componentePrezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?
D.E. D
(Ø)
D.E. [Distinzione] D.I. d
(Ø)
D.I. [Distinzione] Colore Min. raggio di curvatura
(mm)
Bundle winding length
(m)
Reel winding length
(m)
Applicable Tube Size Specifiche Pressione d'esercizio massima
(MPa)

12.00 €

1 4 giorni 4Fino a 42.5Fino a 3[Trasparente (colori diversi dal bianco inclusi)] Trasparente (inclusi articoli colorati)1320-Misura metricaProdotto standard3.3

385.11 €

1 26 giorni -Fino a 4-Fino a 3[Trasparente (colori diversi dal bianco inclusi)] Trasparente (inclusi articoli colorati)--500Misura metricaProdotto su ordinazione3.3

80.90 €

1 26 giorni -Fino a 4-Fino a 3[Blu] Blu chiaro--100Misura metricaProdotto su ordinazione3.3

181.40 €

1 26 giorni -Fino a 8-Fino a 6[Trasparente (colori diversi dal bianco inclusi)] Trasparente (inclusi articoli colorati)--100Misura metricaProdotto su ordinazione2

26.92 €

1 Stesso giorno

Stock

8Fino a 86Fino a 6[Trasparente (colori diversi dal bianco inclusi)] Trasparente (inclusi articoli colorati)4020-Misura metricaProdotto standard2

343.81 €

1 26 giorni -Fino a 8-Fino a 6[Trasparente (colori diversi dal bianco inclusi)] Trasparente (inclusi articoli colorati)--200Misura metricaProdotto su ordinazione2

Supporto tecnico