• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Tubazione in nylon morbido serie TS / TISA

Tubazione in nylon morbido serie TS / TISA

SMC

SMC

Pliable soft nylon tubing.
[Features]
· Maximum operating pressure 1.0 MPa or less (at 20°C).
[Applications]
· For general pneumatic tubing.

(i)Nota

  • The maximum operating pressure values listed are at 20°C or less. See the catalog for details.
  • For specifications and details, please refer to the catalog.
  • Product pictures are representations.
  • The last digits of the product codes indicate the length of the tubings.

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Specifications Of Soft Nylon Tubing TS/TISA Series

Soft Nylon Tubing TS/TISA Series: related images

Appearance of Soft Nylon Tubing TS/TISA Series

Soft Nylon Tubing TS/TISA Series: related images

Maximum operating pressure

- Tubing Size
Metric size (TS series) Inch size (TISA series)
Nominal TS0425 TS0604 TS0806 TS1075 TS1209 TS1612 TISA01 TISA05 TISA07 TISA11 TISA13
Outer diameter mm 4 6 8 10 12 16 3.18 4.76 6.35 9.53 12.7
Inner diameter (mm) 2.5 4 6 7.5 9 12 2.18 3.48 4.57 6.99 9.56

List Of Colors

  • Black (B)
  • White (W)
  • Red (R)
  • Blue (BU)
  • Yellow (Y)
  • Green (G)

Specifications

Fluid Air/waterNote 1)
Maximum operating pressure MPaNote 2) 20°C or less 2.0 1.7 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3
40°C 1.4 1.2 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9
60°C 1.0 0.85 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65
80°C 0.8 0.65 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
100°C 0.6 0.45 0.35 0.35 0.35 0.4 0.35 0.35 0.35 0.35 0.35
Applicable fittingsNote 2) Note 3) One-touch fittings, insert fittings, self-align fittings, miniature fittings
Minimum bending radius
mmNote 4) 		Minimum bending radius 15 23 45 55 65 90 18 27 30 55 65
Tube close bend radius (reference value) 12 17 34 42 50 70 12 15 23 42 50
Operating temperatureNote 2) -40 to +100°C, Water: 0 to +50°C (No freezing)
Material Nylon 12

Note 1) Refer to "Printing/Fluid."
Note 2) Be sure to operate under the maximum operating pressure and maximum operating temperature conditions using the lower maximum operating specification of either the tubing or fittings.
Note 3) Mount an inner sleeve when using metal one-touch fittings in high-temperature environments of 60°C or more. Use self-align fittings at a temperature of 60°C or less.
Note 4) The minimum bending radius is a representative value measured as shown in the figure on the left.

  • Use a tube above the recommended minimum bending radius.
  • The tubing may be bent if used under the recommended minimum bending radius. Therefore, refer to the refraction value and make sure that the tubing is not bent or flattened.
  • The tube close bend radius is not guaranteed. The value of 2R is a representative value measured with a bent or flattened tube using the method shown in the figure on the left.
 
Soft Nylon Tubing TS/TISA Series: related images

How to measure the minimum bending radius

Bend the tubing into a U shape at a temperature of 20°C. Fix one end and close the loop gradually. Measure 2R when the deformed ratio of the tubing diameter at bending reaches 10%.

Printing/Fluid

Print Code Fluid
Previous SMC TS 0604 SOFTNYLON 6 ×; 4 Air
NEW ● SMC TS 0604 SOFTNYLON 6 ×; 4 Air/water

Made-To-Order Specifications

  • 100‑m reel: Metric size and inch size, except for ø16 (diameter 16 mm). Suffix "-X3" to the end of part number.
  • Longer length reel: Metric size. Suffix "-X3" to the end of part number.
  • 20‑m roll: Inch size. Suffix "-X4" to the end of part number.

* Please contact SMC for specifications in detail, dimensions, delivery and specifications other than those mentioned above.

Caution

  1. 1. Compatible with water due to a change in materials. Compatible fluid types are printed on the tube body for differentiation, so please be sure to check this.
    Note) If using the previous TS/TISA series with "water," the tube may shrink and cause air leakage or the tube may fall out.
  2. 2. The products whose material has changed are applicable to general industrial water. Please contact SMC if using other kinds of fluid. Also, the surge pressure must not exceed the maximum operating pressure. If the surge pressure exceeds the maximum operating pressure, it will result in damage to fittings and tubes.
  3. 3. Please exercise caution when using this item in a clean room. There is a possibility of plasticizers and other materials precipitating on the tube surface and detracting from the cleanliness level of the room.

*See manufacturer's catalog for safety information.

Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
TISA05B-20
TISA05BU-20-X4
TISA05R-20-X4
TISA05W-20
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
D.E. D
(Ø) 		D.E. [Distinzione] D.I. d
(Ø) 		D.I. [Distinzione] Colore Min. raggio di curvatura
(mm) 		Bundle winding length
(m) 		Reel winding length
(m) 		Applicable Tube Size Specifiche Pressione d'esercizio massima
(MPa)

22.23 €

1 26 giorni 4.76Fino a 53.48Fino a 4[Trasparente (colori diversi dal bianco inclusi)] Trasparente (inclusi articoli colorati)-20-Misura in polliciProdotto standard1.3

23.15 €

1 26 giorni 4.76Fino a 53.48Fino a 4[Blu] Blu chiaro-20-Misura in polliciProdotto su ordinazione1.3

23.19 €

1 26 giorni 4.76Fino a 53.48Fino a 4[Blu] Blu-20-Misura in polliciProdotto su ordinazione1.3

22.23 €

1 26 giorni 4.76Fino a 53.48Fino a 4[Trasparente (colori diversi dal bianco inclusi)] Traslucido (colore naturale)-20-Misura in polliciProdotto standard1.3

Loading...

  1. 1
 

Informazioni di base

Tipo Dritto Uso servizio taglio NA Materiale Resina poliolefinica (standard UL-94, V-0 equivalente)
Liquido applicabile Acqua / Aria Ambiente d'esercizio Standard Temperatura d'esercizio(°C) -40 – +100, con acqua: 0 – +50 (senza congelamento)

Configura

Ripristina

4Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • D.E. D(Ø)

    • 3.18
    • 4
    • 4.76
    • 6
    • 6.35
    • 8
    • 9.53
    • 10
    • 12
    • 16

    Ripristina

  • D.I. d(Ø)

    • 2.5
    • 3.48
    • 4
    • 4.57
    • 6
    • 6.99
    • 7.5
    • 9
    • 9.56
    • 12

    Ripristina

  • D.I. [Distinzione]

    • Fino a 3
    • Fino a 4
    • Fino a 5
    • Fino a 6
    • Fino a 7
    • Fino a 8
    • Fino a 9
    • Fino a 10
    • Fino a 15

    Ripristina

  • Colore

    • Trasparente (colori diversi dal bianco inclusi)
      • Traslucido (colore naturale)
      • Trasparente (inclusi articoli colorati)
    • Blu
      • Blu
      • Blu chiaro
    • Giallo
      • Giallo fosforescente
    • Verde
      • Verde fosforescente

    Ripristina

  • Bundle winding length(m)

    • 20
    • 100

    Ripristina

  • Reel winding length(m)

    • 100
    • 150
    • 200
    • 500

    Ripristina

  • Applicable Tube Size

    • Misura in pollici
    • Misura metrica

    Ripristina

  • Specifiche

    • Prodotto standard
    • Prodotto su ordinazione

    Ripristina

  • Pressione d'esercizio massima(MPa)

    • 1.3
    • 1.7
    • 2

    Ripristina

  • Tipo

    • TISA
    • TS

    Ripristina

  • D.E. [Distinzione]

    • Fino a 4
    • Fino a 5
    • Fino a 6
    • Fino a 7
    • Fino a 8
    • Fino a 10
    • Fino a 15
    • Fino a 20

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • Stesso giorno
    • 4 giorni o meno
    • 26 giorni o meno
    • 31 giorni o meno
    • 33 giorni o meno
    • 39 giorni o meno

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.